—Connect the Infotainment system as a client to the hotspot of an externalWi-
Fi
device (→ Wi-Fi hotspot – Wi-Fi client).
Wi-Fi pairing via QR code
The Wi-Fi
connection can also be established by scanning the corresponding QR Code.
Prerequisites
✓ The Wi-Fi
hotspot of the Infotainment system is activated.
✓ A suitable application for scanning aQR Code
is installed on the Wi-Fi device.
1. Tap HOME
Or: Tap MENU
Wi-Fi.
Wi-Fi.
2. Tap Quick connection with Infotainment system.
3. Scan the QR Code
on the Infotainment system screen with the Wi-Fi device.
The Wi-Fi
device is connected as a client to the Wi-Fi hotspot of the Infotainment system.
While the Infotainment system is in theWi-
Fi
settings menu, the wireless charging function is deactivated. Wireless charging is activated again once you leave the
Settings menu.
For older Wi-Fi
devices, it may be the case that the function is restricted or it does not work. Make sure you are using the
latest software version for your Wi-Fi device.
Configuring a Wi-Fi client
To establish an Internet connection, e.g. to use country-specific online services, the Infotainment system can use the
Wi-Fi
hotspot of an external Wi-Fi device such as a mobile telephone.
Setting up a Wi-Fi connection
1. Activate the Wi-Fi
hotspot on the Wi-Fi device. Observe the operating instructions provided by the manufacturer of theWi-Fi
device.
2. Tap HOME
Wi-Fi Wi-Fi:.
Wi-Fi Wi-Fi:.
Or: Tap MENU
3. Tap Wi-Fi search
Or: Activate Wi-Fi.
The Infotainment system searches forWi-Fi
hotspots nearby. The search operation may take a few seconds.
4. Select the Wi-Fi
network of the desired Wi-Fi device.
418
English 