Selecting a menu or information display
1. Switch on the ignition.
2. Personalisation: select user.
3. Press the
→ Fig. 1 button, several times if required, if a message or the vehicle pictogram is displayed.
4. Press the or → Fig. 1 button to display the menus and to browse through a menu.
5. To open the menu or information display shown, press the
information display opens automatically after a few seconds.
button → Fig. 1 or wait until the menu or
Selecting secondary displays
To select the secondary displays, proceed as follows :
1. Use the or button to select the left-hand or right-hand secondary display area.
2. Use the arrow keys or to select your preferred secondary display.
3. Press the
button to confirm your selection.
Press and hold the
displays.
button to show or hide secondary
Configuring secondary displays
1. Use the or button to select the left-hand or right-hand secondary display area.
2. Use the arrow buttons or to navigate to theSettings menu and select the required secondary display.
3. Press the
button to make your changes.
A tick indicates that the relevant secondary display is activated.
4. To return to menu selection, press the or button.
The secondary displays can be configured or hidden independently of each
other.
Navigation map in the digital instrument cluster
The digital instrument cluster may be able to display a detailed navigation map, depending on the vehicle equipment.
You can adjust the size of the navigation map to any given size. To select the preferred map size:
1. Press the
2. Press the arrow button or on the multifunction steering wheel to zoom in and out.
3. Press and hold the button on the multifunction steering wheel to show or hide the secondary displays.
button on the multifunction steering wheel to open theNavigation display area.
If warning messages about malfunctions are displayed when the ignition is switched on, it may not be
possible to adjust some settings as described, or the information display may appear differently. If the fault
persists, go to a correspondingly qualified workshop.
WARNING
If the driver is distracted when driving, this can cause accidents and serious injuries.
● Never operate the instrument cluster while the vehicle is in motion.
● Adjust all settings in the instrument cluster and Infotainment system only when the vehicle is stationary.
23
English 