Reflections can occur if the incident sunlight strikes the display at an unfavourable
angle.
The ideal position to read the head-up display depends on the seat position and the height setting of the
head-up display.
Driving data display
The multifunction display shows travel and fuel consumption data. There are several options for showing driving data
in the secondary display area (→ Digital instrument cluster).
Different driving data can be selected depending on the vehicle equipment level. The driving data displayed depend
on the current driving behaviour, the vehicle status (e.g. particulate filter regeneration) and the current driving
situation (e.g. urban traffic, motorway journeys). The driving data are calculated as an average value over sections of
varying length. Consequently, the value currently displayed may differ from the actual average value.
Resetting multifunction displays
1. Press the
or button.
2. Use the arrow buttons oder to select the corresponding secondary display in the configuration menu.
An arrow after the entry in the configuration menu links to a submenu.
3. In the submenu, select Reset data and press the
button to confirm.
The memory will automatically be reset toSince start if the journey is interrupted for more than 2 hours. The
Since refuelling memory is reset after refuelling. TheLong-term memory is not reset automatically.
The memory collects driving data for up to 19 hours and 59 minutes or 99 hours and 59 minutes of driving
time or 1999.9 km or 9999.9 km distance covered. The memory is deleted if one of these maximum values is
exceeded. The maximum values vary depending on the instrument cluster version.
32
English 