—Or: Switch on the ignition.
Activating the Leaving Home function
—Unlock the vehicle when automatic lighting control
is switched on and the light sensor detectsdarkness.
Deactivating the Leaving Home function
—Automatically after the switch-off delay.
—Or: Lock the vehicle.
—Or: Press the light switch as often as necessary until the setting is displayed in the instrument cluster.
—Or: Switch on the ignition.
Setting the Coming Home and Leaving Home functions
The switch-off delay can be set and the function activated or deactivated in the vehicle settings in the Infotainment
system (→ Vehicle settings menu).
Depending on the equipment, the behaviour of the exterior lighting can be set in the vehicle settings in the
Infotainment system.
It is possible to choose between two display strategies in theConvenience light settings menu:
—Classic Coming Home function and Leaving Home function.
The surround lighting, headlights and tail light clusters are switched on and off simultaneously.
—Dynamic Coming Home function and Leaving Home function.
The surround lighting, headlights and tail light clusters are switched on and off dynamically and in some cases with
animation.
Headlight range control
Headlight range control can be used to adjust the dipped beam light cone to the vehicle load level. This gives the
driver the best visibility possible and means that oncoming traffic will not be dazzled →
.
The headlight range can be adjusted in the Infotainment system, depending on the equipment.
Manual headlight range control
Adjusting in the Infotainment system:
1. Press the button or the
function button.
2. Tap the Vehicle and function buttons to open theVehicle settings menu.
3. Touch the Light function button to open theLight settings menu.
Headlight range
4. Tap the control
function button.
5. Tap the required setting value(typical vehicle load level).
158
English 