The wipers function only when the ignition is switched on and the bonnet or boot lid are closed.
WARNING
Without adequate anti-freeze, the washer fluid may freeze onto the windscreen and obscure your view.
● In winter temperatures, the windscreen washer system should only be used when adequate frost protection has
been added.
● In winter temperatures, never use the windscreen washer system before the windscreen has been heated by the
ventilation system or the windscreen heating. This could lead to the anti-freeze mixture freezing on the
windscreen and restrict the driver's vision.
WARNING
Worn or dirty wiper blades reduce visibility and increase the risk of accidents and severe injuries.
● Always change windscreen wiper blades if they are damaged or worn and no longer clean the windscreen
properly (→ Wiper blades).
NOTICE
Before setting off and before switching on the ignition, always check the following to avoid damage to the
windows, wiper blades and wiper motor:
● The wiper lever is located in the basic position.
● Snow and ice have been removed from the wiper blades and windows.
● Wiper blades that have become frozen onto the glass have been carefully loosened.
NOTICE
Do not switch on the wipers when the window is dry. Using the wipers when the window is dry can damage the
glass.
When switched on, the wipers will temporarily be switched to the next setting down when the vehicle is
stationary.
If the vehicle is parked during cold weather, the service position of the windscreen wiper may be helpful in
order to be able to release the wiper blades better from the windscreen (→ Wiper blades).
Wiper function
Automatic activation of the rear window wiper
The rear window wiper is switched on automatically if the front windscreen wipers are switched on and reverse gear
is engaged. Automatic activation when reverse gear is engaged can be activated and deactivated in the vehicle
settings in the Infotainment system (→ Vehicle settings menu).
163
English 