NOTICE
•
•
Observe the operating instructions for any device that you plug into the socket.
Never exceed the maximum power rating as this could damage the whole vehicle electrical
system.
•
12-volt socket:
- Only use accessories that have been approved in accordance with the relevant
guidelines on electromagnetic compatibility.
- Never feed electricity into the socket.
While driving
Starting the engine, changing gear and
parking
Starting and stopping the engine
Introduction
This chapter contains information on the followingsubjects:
⇒ Ignition lock
⇒ Starting the engine
⇒ Stopping the engine
⇒ Electronic immobilizer
Immobilizer display
If the vehicle key is not valid or there is a fault in the system, then
may be displayed in the
instrument cluster. The engine cannot be started ⇒ Electronic immobilizer.
Push-starting or towing
For technical reasons, your vehicle must not be push-started or tow-started. Use jump leads to
start the engine instead.
Additional information and warnings:
•
•
•
•
•
•
•
•
•
•
Vehicle key set ⇒ Vehicle key set
Changing gear ⇒ Changing gear
Braking, stopping and parking ⇒ Braking, stopping and parking
Steering ⇒ Steering
Pull-away assist systems ⇒ Pull-away assist systems
Filling the tank ⇒ Filling the tank
Fuel ⇒ Fuel
Manual opening and closing ⇒ Manual opening and closing
Starting the engine with jump leads ⇒ Starting the engine with jump leads
Tow starting and towing ⇒ Tow-starting and towing