Advertisement

Advertisement

Keys, locks and alarm system -> Deactivate keyless locking for Your Volkswagen Virtus 4 Door First Generation (2018-2023)

3. Lift the cover in the direction of the arrow.  
4. Release the door handle.  
Operation  
Keep the key with you when unlocking and locking.  
Unlocking  
Locking/unlocking:  
— Insert the key into the lock cylinder and unlock or  
lock it.  
1. Hold the door handle.  
2. Press the button.  
3. Open the door.  
Fitting the cover:  
1. Pull the door handle and hold it.  
2. Replace the cover.  
Locking  
3. Release the door handle.  
Locking the door without the lock cylinder  
1. Close the door.  
2. Press the button.  
1. Open the door.  
After locking, it is not possible to unlock the door  
within 2 seconds by pressing the button.  
2. Insert the key or a flat-head screwdriver into  
the slot.  
Unlocking the boot lid  
3. Use the key or a flat-blade screwdriver to push  
it in towards the door.  
— Press the handle on the boot lid.  
4. Close the door.  
Protection against inadvertently locking the key in  
the vehicle  
If the key is locked inside the vehicle, the vehicle will  
unlock itself automatically. If no door is opened  
within 45 seconds, the vehicle automatically locks  
again.  
Deactivate keyless locking  
Use  
If the key is locked in the boot, the boot lid will au-  
tomatically unlock itself.  
The keyless locking system (Keyless Access) allows  
you to unlock and lock the car without actively using  
the key.  
Deactivate keyless locking  
23  
— Opening the bonnet  
Settings  
— Opening the boot lid  
Deactivate keyless locking  
— Opening the door  
— Tampering with the ignition lock  
— Door unlocked via the locking cylinder  
1. Lock the vehicle with the button on the key.  
2. Press the button on the door handle within  
5 seconds.  
— Pressing the alarm button on the key (only applies  
to key version 2) » page 20)  
Deactivation is confirmed by a single flash of  
the direction indicators.  
Switching off the triggered alarm  
3. To check the deactivation, wait at least 10 sec-  
onds and then press the button on outer the  
door handle.  
— Unlock the vehicle.  
Or:  
The door should remain locked.  
— Turn on the ignition.  
Or:  
Keyless locking is automatically reactivated after the  
vehicle is unlocked.  
— Pressing the alarm button on the key (only applies  
to key version 2) » page 20).  
Troubleshooting  
The vehicle cannot be unlocked or locked using the  
button on the handle  
1. Lock or unlock the vehicle with the button on  
the key.  
2. Wait at least 5 seconds and then try to unlock or  
lock the vehicle using the button on the handle.  
3. If keyless locking does not work, seek assistance  
from a specialist garage.  
If the vehicle is not unlocked for a longer peri-  
od of time, the function can be deactivated  
automatically.  
No key found when the ignition is switched on  
illuminated  
Message: No key found in the vehicle  
— Put the key in the vehicle.  
Alarm system  
Functionality  
The alarm system triggers audible and visual signals.  
The alarm system is automatically activated approxi-  
mately 30 seconds after the vehicle is locked.  
The alarm system is automatically deactivated after  
the vehicle is unlocked.  
Alarm triggering  
The activated alarm system triggers an alarm when  
the following events occur:  
24  
Keys, locks and alarm system