Advertisement

Advertisement

Technical data and specifications -> Vehicle identification data for Your Volkswagen Virtus 4 Door First Generation (2018-2023)

— sunlight  
Technical data and specifi-  
cations  
— moisture  
— air pollution  
— Pebble impacts  
Technical data regulations  
Protection of hollow spaces  
Corrosion-prone cavities of the vehicle are perma-  
nently protected by preservative wax at the factory.  
The emission standard, information on fuel con-  
sumption and other information pertaining to your  
vehicle can be found in the vehicle's technical docu-  
mentation.  
— Remove any spilled wax with a plastic scraper and  
remove stains with mineral spirits.  
This information meets the requirements and condi-  
tions stipulated by legal or technical regulations.  
Underseal  
The underside is permanently protected by the fac-  
tory against chemical and mechanical effects.  
This and other information about your vehicle can be  
obtained from a Volkswagen Partner.  
— Have the protective coating checked by a special-  
ist garage before starting and at the end of the  
cold season.  
The information in the vehicle technical documenta-  
tion take precedence over the information in this  
Owner's Manual. These specifications and values ap-  
ply to your vehicle in its condition and configuration  
at the time of delivery from the manufacturer. Ret-  
rofitting an accessory can negatively affect the in-  
formation and values, in particular the fuel con-  
sumption and carbon dioxide (CO2) emission values  
specified in the vehicle documentation.  
Wheels  
— After washing, preserve the wheels using a suita-  
ble product.  
WARNING  
Risk of accident!  
The performance values indicated have been deter-  
mined without performance-reducing equipment,  
e.g. air conditioning system.  
Excessive dirt on the wheels can unbalance  
·
them.  
Car jack  
— If necessary, apply a suitable grease to the mov-  
ing parts.  
Vehicle identification data  
Vehicle identification number (VIN)  
The vehicle identification number is found in the fol-  
lowing locations:  
— on the right of the engine compartment  
— on a plate under the windscreen in the lower left  
corner  
— on the type plate at the bottom of the vehicle's  
central body pillar  
In some countries the type plate is not used.  
Type plate  
Technical data regulations  
127  
10" Infotainment system:  
Car Service Settings  
A
B
Vehicle manufacturer  
Engine number  
Vehicle identification number (VIN)  
The engine number is embossed on the engine  
block.  
VIN screen  
VIN is displayed in the following Infotainment menu:  
Axle weights and loads  
Values shown are for the basic model without any  
special equipment.  
1.0 l/85 kW TSI engine  
Gearbox  
Permissible total weight (kg)  
Maximum permissible front axle  
manual  
1630  
automatic  
1657  
830/850a)  
870/880b)  
load (kg)  
Maximum permissible rear axle  
load (kg)  
820  
810  
a)  
Applies to vehicles that meet the EU6W emission standard.  
b)  
Applies to vehicles that meet the EU4 or EU6W emission standards.  
1.5 l/110 kW TSI engine  
Gearbox  
manual  
1685  
automatic  
1685  
Permissible total weight (kg)  
Maximum permissible front axle  
load (kg)  
Maximum permissible rear axle  
load (kg)  
890  
810  
900  
810  
1.6 l/81 kW MPI engine  
Gearbox  
manual  
1612  
automatic  
1642  
Permissible total weight (kg)  
Maximum permissible front axle  
load (kg)  
Maximum permissible rear axle  
load (kg)  
820  
820  
860  
820  
Payloads  
— The weight of the equipment excluded from the  
operating weight  
Use the difference between the permissible total  
weight of the vehicle and the operating weight to  
find the approximate maximum payload weight.  
WARNING  
Risk of accident and vehicle damage!  
The payload includes the following components:  
— The weight of the passengers  
Do not exceed the specified values for the per-  
·
missible weights.  
— The weight of all luggage and other cargo  
128  
Technical data and specifications