Get Wheels -> Tyre pressure monitor Guide for Volkswagen Virtus 4 Door First Generation (2018-2023)

Label with the specified tyre pres-

sure values

Function restriction

The system is unable to provide a warning in the

event of a very rapid tyre pressure loss, e.g. sudden

puncture.

The sticker for storing tyre pressure readings is loca-

ted on the centre body pillar on the driver’s side.

The system function may be restricted in the follow-

ing cases:

— Uneven load on the wheels

— Sporty driving style

— Driving on dirt roads

Storing the tyre pressure

1. Inflate the tyres to the specified pressure.

2. Turn on the ignition.

Information about pressure check with cold

tyres » page 115, What you should be mindful of

3. Save the tyre pressure by one of the following

methods.

Tyre pressure reading in case of partial load

Tyre pressure reading in case of full load

Storing the tyre pressure using button

Specified tyre pressure value for the spare

wheel

1. Press and hold the button on the key bar.

The indicator light

on the instrument cluster

illuminates. After the tyre pressure values have

been saved, an acoustic signal sounds and the

indicator light goes out.

Tyre pressure monitor

2. Release the key.

Functionality

Storing the tyre pressure values in the Infotainment

system

The tyre pressure monitor indicates a change in tyre

pressure.

10" Infotainment system:

In the following menu, select the item to display the

vehicle status:

Warning when pressure changes

illuminated

1. Tap

2. Select the screen with the vehicle status menu

by swiping with your finger.

1. Stop the vehicle.

2. Check the tyres and tyre pressures

3. Select the vehicle status menu item.

4. Select the tyres menu.

Displaying tyres with modified pressures

5. Press the

button.

10" Infotainment system:

6. Follow the instructions on the screen.

1. Tap

2. Select the screen with the vehicle status menu

by swiping with your finger.

When the tyre pressure needs to be saved

Save the tyre pressures in the following cases:

3. Select the vehicle status menu item.

4. Select the tyres menu.

— Change of tyre pressure

— Change of one or more wheels

— Change of position of a wheel on the vehicle

— Always after 10,000 km or once a year

116

Wheels

Tyre pressure storage label

2. Remove the cover cap.

The process for storing tyre pressures is also shown

on a label on the central body pillar on the driver’s

side.

Installing

— Push the cover cap onto the wheel bolt to the

stop.

Full wheel frame

Removing and installing the trim

Applies to factory built or Volkswagen Genuine Ac-

cessories trims.

Removing

1. Hang the clamps for removing the wheel trims

at the edge of one of the openings in the trim.

Inflating the tyres to the specified pressure

Saving the values

2. Push the wheelbrace through the clamp, push

on the tyre and pull off the wheel trim.

Installing

Troubleshooting

1. Press the wheel trim onto the wheel rim at the

designated valve opening.

Restricted function / system fault

When using an anti-theft wheel bolt, it must be

located as shown on the bezel.

flashes approx. 1 minute and then remains il-

luminated

2. Press the trim, starting at the valve, into the rim

on both sides until it engages around the entire

circumference.

1. Stop the vehicle, switch off the ignition and

start the engine.

If the

indicator light flashes again after start-

NOTICE

ing the engine there is a fault in the system.

2. Continue driving, exercising appropriate caution,

and seek assistance from a specialist garage.

Use hand pressure, do not hit the wheel cover.

Wheel bolt cover caps

Removing and installing bolt caps

Removing

1. Insert the extraction pliers from the tool kit into

the hole in the bolt cap.

Wheel bolt cover caps

117

Wheels -> Tyre pressure monitor for Your Volkswagen Virtus 4 Door First Generation (2018-2023)

Related Topics

Wheels

Popular Owner Manuals

Latest Owner Manuals