4.4
Controls
• Driver Information and Warnings
Messages show if an unsatisfactory condition is detected.
Message priority is shown by a red or amber triangle above the
message display.
Red: Potential personal danger or danger of damage to the
vehicle.
Amber: Advisory, shows possible degraded vehicle
performance.
Warning messages will show when the ignition is ON and will
cycle automatically.
View and acknowledge messages at any time by pressing the
READ button (F).
• Service Intervals
TIME FOR REGULAR SERVICE will be shown when a regular
vehicle service is due. This message will show at ignition ON
(for two minutes) until the regular service has taken place.
• Trip Computer
The message centre (right) defaults to the trip computer when
there are no messages to show.
[6] TACHOMETER: Shows the engine speed in revolutions per
minute x 1000.
[7] ENGINE COOLANT TEMPERATURE GAUGE: Shows the
temperature of the engine coolant.
Digital Speedometer Location
The digital speedometer can be displayed in either the left or right
message centre depending on preference. All information in the
opposing message centre moves to the other message centre side
accordingly. To change the digital speedometer location, do the
following:
Press MENU and navigate to <Car Settings...> ENTER < Digital
Speedometer...> ENTER and select Left or Right to select the relevant
message centre and press ENTER to confirm.
Message Centre Clock
The message centre clock is shown in the opposite message centre to
the digital speedometer. The clock is shown in either 24 hour or 12
hour display. To change the time format, do the following:
Press MENU and navigate to <Car Settings...> ENTER < Clock>
ENTER and select 24 or 12 to select the relevant time format for the
clock and press ENTER to confirm.
English 
