4.12
Controls
Stalk Controls
Left Side Stalk
Turn Signals : Press up for a right turn, press
down for a left turn. Returns to the centre
position on completion of a manoeuvre.
Hold against spring pressure to show a lane
change.
Main and Dipped Beam : Pull forwards and
latch for main beam. Pull forwards again and
latch to return to dipped beam. Pull forwards
and release without latching, at any time
while the vehicle key is in the ignition
control, to flash main beam ON and OFF.
Pull forwards and release without latching, when the vehicle key is
removed, to start Homesafe (Refer to ’Homesafe’, page 2.12).
Trip Computer : Repeated pressing of
the trip function button (A) moves
through the trip computer displays (Refer
to ’Trip Computer’, page 4.14).
Right Side Stalk
Windscreen Wiper Control :
[1] : OFF.
[2] : Automatic Wipe.
[3] : Normal Speed Wipe.
[4] : Fast Wipe.
Demand Wipe: Pull the stalk forwards.
The windscreen wipers will return to their park position if the
ignition is set to OFF or the hood is unlatched, regardless of the right
stalk position.
Speed Sensitive Wipe : If the wipers are at fast wipe, when the
vehicle slows down (below 7 mph) the wipers will go to normal wipe
speed.
If the wipers are at normal speed when the vehicle slows down
(below 7 mph/h) the wipers will go to automatic wipe (position 2).
As soon as the vehicle speeds up (above 9 mph) the wipers will return
to their original setting.
Windscreen Wiper Delay Control :
Intermittent wipe time delay increases or
decreases in six steps (B). Sixth position gives
the shortest delay between wipes.
Automatic Rain Sensor Wiper Control :
Automatic rain sensor wiper control
increases or decreases the sensitivity in six
steps (B). Sixth position (where the arrow is
set to the bottom marker) gives the least
sensitivity.
Switching from OFF to automatic wiper results in a single wipe to
acknowledge that the wiper control is now automatic. Each time an
increase in sensitivity is made a single wipe acknowledges the
increase. No wipe occurs for a decrease.
If the automatic rain sensor wiper control is not functioning
correctly, check that the sensor located at the top of the windscreen
is clean and clear of debris or dirt.
English 
