4.13
Controls
Windscreen Washer Control : Press the
button (C) for more than one second to
operate the windscreen washers.
Operation continues until the button is
released. When released the washers stop
immediately but the wipers continue for a few strokes, ending with a
pause and then a final wipe.
If used during normal wiper operation, the wipers operate
continually irrespective of the washer operation.
Headlamp Washers : Headlamp washers will operate automatically,
once per journey (each ignition ON), if the windscreen washers are
operated and the headlamps are ON.
Vehicle Horn
To sound the horn press the centre
pad of the steering wheel at any of the
positions shown (A).
Master Lamp Switch
1. All external lamps OFF.
2. Side, side marker, rear and
registration plate lamps ON.
3. With the vehicle key at
position ‘II’ in the ignition
control, Headlamps ON, in
addition to the side, side
marker, rear and registration
plate lamps.
4. With the vehicle key at
position ‘II’ in the ignition
control, if ambient light fades
the side, side marker, rear and registration plate lamps and
headlamps will switch ON automatically. If ambient light then
increases, the side, side marker, rear and registration plate
lamps and headlamps automatically go OFF. Automatic wipers
are market specific.
A light sensor at the top of the windscreen monitors ambient light
levels for automatic lamps operation. Keep the windscreen clean and
make sure that the sensor is not obscured. Obstructing the light in this
area may lead to unwanted operation of the automatic lamps.
English 
