Driving information
►
With area view: Select in the instrument clus-
ter: tab.
– The traffic light information does not adjust
your vehicle's speed to the speed recom-
mendation shown in the display.
Tips
– Observe the safety precautions and note the
limitations of the assist systems, sensors,
and cameras ðpage 127 to ðpage 130.
If another tab or another function is selected
in the instrument cluster, the traffic light in-
formation will appear in the status bar on the
instrument cluster.
Tips
– Traffic light information was only available
in select cities at the time this manual was
published.
Messages
Applies to: vehicles with traffic light information
– Traffic light information is not available na-
tionwide.
The following messages may appear, depending
on the vehicle equipment:
– The functions depend on the navigation da-
ta* being up-to-date and correct identifica-
tion by the traffic sign recognition*.
– Incorrect data from the camera-based traf-
fic sign recognition* or outdated navigation
system* map data may result in missing,
implausible, or incorrect images in the dis-
play.
Malfunction! See owner's manual
The system could not be configured, for example
due to a network malfunction. Turn off the igni-
tion and shut down the vehicle to restart the sys-
tem. Wait several minutes until the vehicle has
shut down completely and then turn the ignition
back on.
– Certain traffic lights can automatically ad-
just to the current traffic situation. If this
occurs, the display of traffic light informa-
tion can change suddenly.
Function currently unavailable. See owner's
manual
There is a temporary system malfunction. Check
if one or more of the following situations applies
and correct the issue if necessary:
– The traffic signs on the road always take pri-
ority over the display. The driver is always
responsible for adhering to the regulations
applicable in the country where the vehicle
is being operated.
– Traffic light information is turned off
– Data transmission is deactivated
– The vehicle is not equipped with traffic sign rec-
ognition.
– Units of measurement and language set-
tings are displayed based on how they were
set in the MMI system settings ðpage 248.
– There is no valid license
– Traffic light information is not available in that
area
Operation
Applies to: vehicles with traffic light information
Driver alert warning
Turning traffic light information on or off
Description
Applies to: vehicles with driver alert warning
You can turn the traffic light information on or
off in the Driver assistance menu ðpage 131.
Within the limitations of the system, the driver
alert warning informs the driver if a break is
needed.
Accessing traffic light information
Depending on the equipment, the vehicle may
have a driver assistance display with or without
area view.
After starting to drive, the driver alert warning
analyzes the driving behavior and uses this data
►
Without area view: Select in the instrument
cluster: Vehicle functions tab > Traffic signs.
136
English 
