2018-2026 Audi Q8 SUV Driving information -> Lap timer User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Driving information -> Lap timer for Your Audi Q8 SUV First Generation (2018-2026)

Driving information  
Sensitivity – You can set the sensitivity of the dis-  
traction warning to High, Medium or Low.  
Distraction warning  
Description  
If you turn off the system, it will remain off the  
next time you turn on the ignition.  
Applies to: vehicles with distraction warning  
The distraction warning will provide an alert if  
the system detects that the driver is distracted  
from the traffic situation.  
Messages  
Applies to: vehicles with distraction warning  
The system detects if you are performing opera-  
tions while driving that could distract you from  
the traffic situation, such as adjusting the power  
seat*.  
If is displayed when there is a malfunction,  
the distraction warning functions may be unavail-  
able or may be limited.  
A message that indicates the cause and possible  
solution may appear with some displays. Try  
turning on the system again later.  
In this case, the system will prompt you to con-  
centrate on the traffic situation starting at low  
speeds with a display in the instrument cluster,  
as well as with an audio signal if you are very dis-  
tracted.  
If the malfunction remains, drive to an author-  
ized Audi dealer or authorized Audi Service Facili-  
ty immediately to have the malfunction correct-  
ed.  
System limitations  
In some cases, the system may be limited or may  
not operate at all:  
The following messages may appear, depending  
on the vehicle equipment:  
At speeds lower than approximately 6 mph  
(10 km/h)  
Supervision needed. Focus on the road at all  
times!  
If driver distraction is high due to external in-  
fluences (such as the traffic situation)  
If driver distraction is high due to operating  
equipment that is not part of the vehicle (such  
as mobile devices)  
High levels of distraction have been detected.  
Supervision needed. Focus on the road at all  
times!  
Low levels of distraction have been detected.  
If driver distraction is high due to use of the In-  
fotainment system  
Lap timer  
WARNING  
Introduction  
Applies to: vehicles with lap timer  
Observe the safety precautions and note the  
limitations of the assist systems, sensors, and  
cameras ðpage 127 to ðpage 130.  
You can record and evaluate lap times with the  
lap timer. You can operate the lap timer using the  
multifunction steering wheel ðpage 16.  
Operation  
Applies to: vehicles with distraction warning  
Opening the lap timer  
Turning the distraction warning on or off  
Select in the instrument cluster: Vehicle func-  
tions tab > button > Lap times.  
You can turn the distraction warning on or off  
and adjust its settings in the Driver assistance  
menu ðpage 131. The settings depend on the  
vehicle equipment.  
An additional indicator will appear in the head-up  
display*.  
WARNING  
Possible settings:  
Your focus should always be on driving your  
vehicle safely. As the driver, you have  
138  
Driving information  
Resetting the time  
complete responsibility for safety in traffic. To  
reduce the risk of an accident, only use the lap  
timer functions in such a way that you always  
maintain complete control over your vehicle in  
all traffic situations.  
Select Reset lap times in the menu.  
Tips  
A maximum of 99 lap times can be meas-  
ured.  
Tips  
If timing is paused, you can continue it later  
even if you turn off the ignition.  
Saved lap times cannot be individually de-  
leted from the total results.  
You can retrieve information from the trip  
computer while the lap timer stopwatch is  
running.  
The saved lap timer values will remain after  
turning off the ignition.  
Lap times and timing  
Applies to: vehicles with lap timer  
Lap statistics  
Requirement: the lap timer must be open  
Applies to: vehicles with lap timer  
ðpage 138.  
Displaying lap statistics  
Timing laps  
You can display the number of laps driven , the  
fastest lap +, the slowest lap , and the average  
time in the instrument cluster.  
To start timing manually, select Start lap 1 in  
the menu.  
To start timing automatically as soon as you be-  
gin to drive, select Start lap 1 by driving off or  
Start by driving off in the menu.  
Select in the instrument cluster: Vehicle func-  
tions tab > button > Lap statistics.  
To start timing a new lap after driving a lap, se-  
Turn the thumbwheel down or up to display the  
lect New lap in the menu. This starts timing  
individual lap times.  
the next lap at the same time.  
To return to the lap timing that was started, se-  
lect the button > Lap times.  
After completing a lap, the difference between  
the last lap and the previous best lap time will be  
indicated with a or +.  
Resetting lap statistics  
Requirement: the lap statistics menu must be  
displayed.  
Pausing timing and displaying a split time  
To take a break , select Pause in the menu.  
To resume timing, select Resume in the menu.  
To display a split time, select Split time in the  
To reset the lap statistics, press and hold the  
left thumbwheel until the message No lap  
times have been recorded yet. appears.  
menu. The split time appears for approxi-  
mately ten seconds in the instrument cluster.  
The current lap timing will continue running.  
Tips  
The lap statistics list the lap times for the last  
30 laps. The fastest and slowest lap times out  
of up to 99 measured laps are also displayed.  
Canceling lap timing  
The timing of the current lap will stop. The lap  
time will be erased and will not be included in the  
statistics.  
Select Cancel lap in the menu.  
139  

Related Topics

Popular Owner Manuals