document_0900452a81793dcc.book Seite 273 Mittwoch, 21. März 2007 5:42 17
Fuses and bulbs
273
Changing bulbs
Installing bulb carrier
All bulbs can be changed easily on the bulb carrier.
The bulb carrier is easy to install.
Fig. 259 Bulb carrier
for boot lid: Position of
the bulbs
Fig. 260 The retaining
clip for the bulb carrier
has a guide pin
The bulbs are secured with a bayonet fastener. The table
below gives an overview of the bulb positions.
– Insert the bulb carrier into the rear light. Make sure you
A
hear the retaining tab ⇒ fig. 260 A click into place.
B
C
– Lightly press the defective bulb into the bulb carrier, then
turn it anti-clockwise and remove it.
– Position the retaining clip A so that the guide pins A
are located in the recess on the retaining clip, and
D
tighten the nut A.
– Fit the new bulb, pressing it into the bulb holder and turn
it clockwise as far as it will go.
– Fit the cover back in the interior trim so that it engages.
– Put the screwdriver back into the tool kit.
– Use a cloth to remove any fingerprints from the glass
part of the bulb.
– Make sure that all bulbs for the rear lights are working.
– Check whether the new bulb is working.
– Re-install the bulb carrier ⇒ page 273.
Position of bulbs
Pos. ⇒ fig. 259
Bulb function
A
B
Reversing light
Tail light and rear fog light
Controls
Safety
Driving tips
General maintenance
Self-help
Technical data
English 
