Get Opening and closing -> Window Guide for BMW I5 4 Door First Generation (2023-2025)

Opening and closing

CONTROLS

The indicator light illuminates for approx.

2 seconds and then continues to flash.

With the vehicle key

▷

After turning off the standby state, an

option to turn off the interior motion sensor

and the tilt alarm sensor will be displayed

on the control display.

Opening windows

Press and hold the button on the vehi-

cle key after unlocking.

The tilt alarm sensor and interior motion sen-

sor are switched off until the vehicle is locked

again.

The windows open for as long as the button

on the vehicle key is pressed.

Closing the windows

Ending the alarm

Unlock the vehicle.

With Comfort Access: press and hold

the button on the vehicle key after lock-

ing.

If the vehicle is unlocked with the integrated

key, the drive-ready state must subsequently

be turned on via the emergency detection of

the vehicle key.

The windows close for as long as the button

on the vehicle key is pressed.

Depending on the vehicle equipment, exterior

mirrors are folded in unless they were folded

in during locking. The exterior mirrors are not

folded in when the hazard warning flashers are

switched on.

Window

General information

When a window is frequently opened to the

same position, this task can be performed by

the BMW Intelligent Personal Assistant. This is

useful if you frequently use the same parking

garage, for example.

On the door handle

Principle

The windows can be closed using the door

handle without operating the vehicle key.

Additional information:

The vehicle key is automatically detected near

the vehicle.

BMW Intelligent Personal Assistant, refer to

page 58.

General information

The function is available with Comfort Access.

Safety information

Depending on national-market version, the

windows can also be closed via the door han-

dle using a compatible smartphone and digital

key.

Warning

When operating the windows, body parts and

objects can be jammed. There is a risk of in-

jury or risk of damage to property. Make sure

that the travel path of the windows is clear

while opening and closing.

Additional information:

BMW Digital Key, refer to page 91.

Online Edition for Part no. 01405B37D97 - II/24

Opening and closing

CONTROLS

Functional prerequisites

Functional requirements

▷

Carry the vehicle key with you, for instance

in your pants pocket.

▷

Standby state is switched on.

▷

Drive-ready state is switched on.

▷

Bluetooth must be activated on the smart-

phone to close the window(s) using the dig-

ital key.

The vehicle key or digital key must be inside

the vehicle.

Opening windows

Closing the windows

▷

Press the switch to the resistance

point.

The window opens while the switch

is being held.

▷

Press the switch beyond the resist-

ance point.

The window opens automatically.

Pressing the switch again stops the motion.

Closing the windows

Touch the grooved surface on the door handle

of a closed front door with your finger and hold

it there without grasping the recessed grip.

▷

Pull the switch to the resistance

point.

The window closes while the switch

is being held.

In addition to locking, the windows and glass

sunroof with sun protection will be closed.

▷

Pull the switch beyond the resist-

ance point.

Depending on the vehicle equipment, exterior

mirrors are folded in unless they were folded

in during locking. The exterior mirrors are not

folded in when the hazard warning flashers are

switched on.

The window closes automatically.

Pulling again stops the motion.

Anti-trap mechanism

Inside the vehicle

Principle

The anti-trap mechanism prevents objects or

body parts becoming jammed between the

door frame and window while a window is be-

ing closed.

Overview

General information

If resistance or blockage is detected while a

window is being closed, the closing will be in-

terrupted.

Power windows

100

Online Edition for Part no. 01405B37D97 - II/24

Opening and closing

CONTROLS

Safety information

Overview

Warning

Accessories on the windows such as anten-

nas can impact anti-trap mechanism. There

is a risk of injury. Do not install accessories in

the area of movement of the windows.

Closing without the anti-trap

mechanism

Rear window roller blind button.

In case of danger from the outside or if icing

might prevent normal closing, proceed as fol-

lows:

Operating the side roller blinds

Pull out the side roller sunblind using the loop

and hook it onto the holder.

1. Pull the

switch past the resistance

point and hold it there.

The window closes with limited anti-trap

mechanism. If the closing force exceeds a

specific threshold, closing is interrupted.

Operating the rear roller blind

On the driver’s door

Press the button on the driver's door to

open the rear roller blind if closed or to

close the rear roller blind if open.

2. Pull the

switch past the resistance

point again within approx. 4 seconds and

hold it there.

If the button is pressed again while moving,

the rear roller blind moves in the opposite di-

rection.

The window closes without the anti-trap

mechanism.

System limits

Window roller sunblinds

Safety information

Warning

If you can no longer move the rear roller blind

after pressing the button several times, the

overheating protection has activated. The sys-

tem is disabled for a limited time to prevent

overheating. Let the system cool down.

With closed roller sunblinds and open win-

dows, the roller sunblinds may be strained

while driving due to the air stream. The roller

sunblinds may be damaged and vehicle oc-

cupants may be harmed. There is a risk of

injury. Do not open the windows while driving

if the roller sunblinds are closed.

Safety switch

Principle

The safety switch can be used to prevent chil-

dren, for instance, from opening and closing

101

Online Edition for Part no. 01405B37D97 - II/24

Opening and closing -> Window for Your BMW I5 4 Door First Generation (2023-2025)

Related Topics

Opening and closing

Popular Owner Manuals

Latest Owner Manuals