Get Safety -> Cross Traffic Warning with Braking Guide for BMW I5 4 Door First Generation (2023-2025)

Safety

CONTROLS

4. "Driver Assistance"

5. "Safety and warnings"

6. "Emergency stop"

The Emergency Stop Assistant may be re-

stricted in the following situations:

▷

When the Driver Attention Camera is cov-

ered by the steering wheel.

7. Select the desired setting.

▷

With sunglasses with high protection from

infrared light.

Canceling Emergency Stop

Assistant

The driver can cancel the Emergency Stop As- Cross Traffic Warning with

sistant by actively taking control of the vehicle

Braking

throughout the entire process.

For instance, the system will be canceled in the

following situations:

Principle

At blind driveway exits or when driving out of

perpendicular parking spaces, road users ap-

proaching from the side are detected sooner

by the cross traffic warning than is possible

from the driver's seat.

▷

With strong countersteering.

When flashing.

If the accelerator pedal is pressed hard.

When switching off the hazard warning sys-

tem.

General information

▷

If the system is interrupted on the control

display.

When changing the selector lever position if

the vehicle was already stationary.

At standstill

As soon as the vehicle is stationary, the sys-

tem will carry out the following settings:

▷

The vehicle is secured against rolling away.

The interior lights are switched on.

The area behind the vehicle is monitored by

sensors.

The central locking system is unlocked.

Depending on the vehicle equipment, the area

around the vehicle in front of the vehicle is

monitored as well.

Display in the instrument cluster

Icon

Status

The system indicates approaching road users.

Emergency Stop Assistant is trig-

gered.

If there is a collision risk when reversing, the

system will provide assistance by performing

an automatic brake intervention.

Follow the information in the "Parking assis-

tance systems" chapter.

System limits

The system cannot replace the roadworthy

driving performance of a driver.

205

Online Edition for Part no. 01405B37D97 - II/24

Safety

CONTROLS

Safety information

Turning on the cross traffic warning

automatically

The system must be activated on the control

display. The system turns on automatically as

soon as Park Distance Control or a camera

view activates and you engage a gear position.

Warning

The system cannot serve as a substitute for

the driver’s personal judgment in assessing

the traffic situation. Based on the limits of

the system, it cannot independently react to

all traffic situations. There is a risk of acci-

dent, injury, or property damage. Adjust driv-

ing style to traffic conditions. Watch the sur-

rounding traffic situation closely, be ready to

take over steering and braking at any time,

and actively intervene where appropriate.

If reverse gear is engaged, the rear system is

switched on.

Depending on the equipment, the front system

is turned on when a gear position is engaged.

Depending on the national-market version, the

system is automatically active when the vehi-

cle is started.

Turning off the cross traffic warning

automatically

The system is automatically turned off in the

following situations:

Sensors

The system is controlled by the following sen-

sors:

▷

Radar sensors, side, rear.

▷

When the speed exceeds walking speed.

Depending on the equipment: radar sen-

sors, side, front.

When a certain distance covered is ex-

ceeded.

Activating/deactivating Cross Traffic

Warning

Warning function

The system must be activated on the control

display for the Cross Traffic Warning and brake

intervention to switch on automatically.

General information

The control display shows the corresponding

view, an acoustic signal may sound as neces-

sary, and the warning light in the exterior mir-

ror flashes.

Apps menu

2. "Vehicle"

In case of a brake intervention, a message is

displayed on the control display and close after

a brief period of time.

3. "Driving settings"

4. "Driver Assistance"

5. "Parking"

6. Depending on the equipment, select the

following setting:

▷

"Rear warning"

"Front and rear warning"

"Brake intervention at rear"

206

Online Edition for Part no. 01405B37D97 - II/24

Safety

CONTROLS

The respective boundary area, arrow 1, in the

camera image flashes red if vehicles are de-

tected by the sensors.

Visual warning

Warning light in exterior mirror

Yellow lines, arrow 2, mark the bumper of your

own vehicle.

Acoustic warning

In addition to the visual warning, a signal tone

sounds if your own vehicle moves into the re-

spective direction.

Depending on the national-market version, the

signal tone will already sound when the gear

position is engaged.

The warning light in the exterior mirror flashes

if the rear sensors detect other vehicles when

the vehicle is reversing.

System limits

Display in the Park Distance Control view

System limits of the sensors

Additional information:

Sensors of the vehicle, refer to page 40.

Functional limitations

The function can be limited, for instance in the

following situations:

▷

In tight curves.

Crossing objects are moving at a very slow

or a very fast speed.

In the Park Distance Control view, the respec-

tive boundary area flashes red if vehicles are

detected by the sensors.

▷

Other objects that hide cross traffic are in

the capture range of the sensors.

Display in camera image

BMW Drive Recorder

Principle

The BMW Drive Recorder stores brief video

recordings of the vehicle surroundings, e.g., to

document surrounding traffic.

General information

Video recordings can be saved in different

ways:

Depending on the direction of travel, the view

to the front or back is displayed in the camera

image.

▷

Automatic storage of the recording.

207

Online Edition for Part no. 01405B37D97 - II/24

Safety -> Cross Traffic Warning with Braking for Your BMW I5 4 Door First Generation (2023-2025)

Related Topics

Safety

Popular Owner Manuals

Latest Owner Manuals