Get Driving stability control systems -> Driving Dynamics Control Guide for BMW X6 4 Door Second Generation (2015-2019)

Driving stability control systems

DSC OFF

Controls

Driving Dynamics Control

Driving stability is limited during acceleration

and when driving in curves.

The concept

The Driving Dynamics Control can be used to

adjust the driving dynamics of the vehicle. For

this purpose various programs are available for

selection that are activated via the two buttons

of the Driving Dynamics Control and the DSC

OFF-button.

To increase vehicle stability, activate DSC

again as soon as possible.

Deactivating DSC: DSC OFF

Press and hold this button but not lon‐

ger than approx. 10 seconds, until the

indicator lamp for DSC OFF lights up in the in‐

strument cluster and displays DSC OFF.

Overview

The DSC system is switched off.

Button in the vehicle

Activating DSC

Press button.

DSC OFF and the DSC OFF indicator

lamp go out.

Indicator/warning lights

When DSC OFF is activated, DSC OFF is dis‐

played in the instrument cluster.

Operating the programs

The indicator lamp lights up: DSC OFF

is activated.

Press button

Program

DSC OFF

TRACTION

Maximum traction on loose road surfaces. DTC

Dynamic Traction Control is switched on. Driv‐

ing stability is limited during acceleration and

when driving in curves.

SPORT+

SPORT

COMFORT

ECO PRO

Activating TRACTION

Press button.

Automatic program change

The system may automatically switch to COM‐

FORT in the following situations:

TRACTION is displayed in the instru‐

ment cluster and the indicator lamp for DSC

OFF lights up.

▷

Failure of DSC Dynamic Stability Control.

The vehicle has a flat tire.

Deactivating TRACTION

When activating cruise control in TRAC‐

TION or DSC OFF mode.

Press button again.

TRACTION and the DSC OFF indica‐

tor lamp go out.

149

Controls

Driving stability control systems

Indicator/warning lights

Activating SPORT

If TRACTION is activated, TRACTION is dis‐

played in the instrument cluster.

Press button repeatedly until SPORT

is displayed in the instrument cluster.

The indicator lamp lights up: TRAC‐

TION is activated.

Configuring SPORT

When the display is activated on the Control

Display, refer to page 151, the SPORT driving

mode can be set.

SPORT+

Concept

After the SPORT driving mode is activated, se‐

lect "Configure SPORT" on the display and

configure the program.

Sporty driving with optimized chassis and sus‐

pension and adjusted drivetrain with limited

driving stabilization.

SPORT can also be configured before it is acti‐

vated.

General information

Dynamic Traction Control is switched on.

Using iDrive:

1. "Settings"

The driver handles several of the stabilization

tasks.

2. "SPORT mode" or: "Driving mode"

3. Configure driving mode.

Activating SPORT+

The configuration is stored for the profile cur‐

rently used.

Press button repeatedly until SPORT+

appears in the instrument cluster and

the DSC OFF indicator light lights up.

This configuration is retrieved when the

SPORT driving mode is activated.

COMFORT

Concept

For a balanced tuning with maximum driving

stabilization.

Automatic program change

When switching on the manual speed limiter or

activating cruise control, the program automat‐

ically switches to SPORT mode.

Indicator/warning lights

SPORT+ is displayed in the instrument cluster.

Activating COMFORT

Press button repeatedly until COM‐

FORT is displayed in the instrument

cluster.

The DSC OFF indicator light is illumi‐

nated: Dynamic Traction Control DTC

is activated.

In certain situations, the system automatically

changes to the NORMAL program, automatic

program change, refer to page 149.

SPORT

Consistently sporty tuning of the suspension

and drivetrain for greater driving agility with

maximum driving stabilization.

ECO PRO

ECO PRO, refer to page 208, provides consis‐

tent tuning to minimize fuel consumption for

maximum range with maximum driving stabili‐

zation.

150

Driving stability control systems

Controls

Comfort functions and the engine Controller

are adjusted.

The program can be configured to individual

specifications.

Activating ECO PRO

Press button repeatedly until ECO

PRO is displayed in the instrument

cluster.

Configuring ECO PRO

1. Activate ECO PRO.

"Configure ECO PRO"

Make the desired settings.

Displays in the instrument cluster

Selected program

The instrument cluster displays

the selected program.

Program selection

Pressing the button displays a

list of the selectable programs.

Depending on your vehicle's op‐

tional features, the list in the in‐

strument cluster can differ from

the illustration shown.

Display on the Control Display

Program changes can be displayed briefly on

the Control Display.

To do so, make the following settings:

1. "Settings"

2. "Driving mode"

3. "Driving mode info"

151

Driving stability control systems -> Driving Dynamics Control for Your BMW X6 4 Door Second Generation (2015-2019)

Related Topics

Driving stability control systems

Popular Owner Manuals

Latest Owner Manuals