Practical information
order to avoid any risk of brake ꢁuid splashing
onto them.
appropriate for the temperature conditions
must be used in order to protect the system's
components (pump, tank, ducts, jets).
Only use products recommended by the
Manufacturer or products of equivalent
quality and speciꢂcation.
Topping up
In order to optimise the operation of
components as important as those in the
braking system, the Manufacturer selects and
oꢀers very speciꢂc products.
Filling with pure water is prohibited in all
circumstances (risk of freezing,
limescale, etc.).
Use only DOT4 brake ꢁuid from a sealed
container.
► Top up to the required level when
necessary.
Tank capacity: 1 litre.
► Clean the cap before removing it to reꢂll.
The level of this ꢁuid should be close to
the "MAX" mark. If not, check the brake
pads for wear.
12 V battery
The battery does not require any
maintenance.
Reꢁtting front bumper
Check regularly that the terminals are correctly
tightened and that the connections are clean.
► Bring the bumper close to the frame.
► Connect the indicator wiring looms.
For more information on the precautions
to take before any work on the 12 V
battery, refer to the corresponding section.
► Place it in position and then push the bumper
horizontally until the attachment points clip into
place.
► Screw the 2 upper side ꢂxing screws into the
Manual parking brake
ꢁaps.
► Screw the 2 lower side ꢂxing screws into the
wheel arches.
► Screw the 2 lower ꢂxing screws into the
frame.
If you notice excessive brake lever travel
or decreased eꢀectiveness, the parking
brake must be adjusted, even between two
services.
► Turn both ꢂxing screws a quarter turn.
► Unclip the access cover.
► Clip the 2 upper access ꢁaps to the wings.
► Remove the cap from the tank to top up.
This system must be checked by a dealer or
qualiꢂed workshop.
Screenwash ꢀuid
Access/Topping up
Checks
Brake pads/Discs/Drums
Unless otherwise indicated, check these
components in accordance with the
Manufacturer's service schedule.
Otherwise, have them checked by a dealer or
qualiꢂed workshop.
Brake wear depends on the style of
driving, particularly in the case of vehicles
used in town, over short distances. It may be
necessary to have the condition of the brakes
checked, even between vehicle services.
The ꢁuid must be topped up with a pre-mixed
product.
In winter (temperatures below 0°C), a ꢁuid
containing an anti-freeze agent which is
24
English 