Practical information
The charge level increases slowly as charging
progresses.
When the charge is completed, the instrument
panel switches oꢀ.
To ꢂnd out how often the brake ꢁuid should be
replaced, refer to the Manufacturer's servicing
schedule.
Checking levels
Check all of the following levels regularly in
accordance with the Manufacturer's service
schedule. Top them up if required, unless
otherwise indicated.
7
Removing front bumper
Disconnection
► Disconnect the charging cable from the
power socket.
► Open the passenger door.
► Store all of the charging cable inside its
housing.
If a particular level has dropped signiꢂcantly,
have the corresponding circuit checked by a
dealer or qualiꢂed workshop.
Fluids must comply with the
Manufacturer's recommendations.
► Close the passenger door.
Used products
Electric motor
Avoid prolonged contact of used ꢁuids
with the skin.
Most of these ꢁuids are harmful to health and
very corrosive.
► Remove the 2 lower ꢂxing screws from the
frame.
Do not discard used ꢁuids into sewers
or onto the ground.
► Remove the 2 upper access ꢁaps from the
wings, pass an arm under the wing and lift it up.
► Remove the 2 upper side ꢂxing screws from
the ꢁaps.
Drain used ꢁuids into the dedicated
containers provided by dealers or qualiꢂed
workshops.
► Remove the 2 lower side ꢂxing screws from
the wheel arches.
► Pull the bumper horizontally for about ten
centimetres until the attachment points come
away.
Brake ꢀuid
1. Screenwash ꢁuid reservoir
2. Fuse box
3. 12 V battery
4. Traction battery/48 V electrical circuit
5. Electric motor
6. Brake ꢁuid reservoir
Before doing any work
Switch oꢀ the ignition, apply the parking
brake, check that the instrument panel is oꢀ
and that the charging cable is not connected.
► Disconnect the indicator wiring looms.
Before topping up, it is necessary to
protect the motor and its connectors in
23
English 