STEERING WHEEL CONTROLS -> Direction Indicators / Lighting Control for Your Citroen Berlingo SUV First Generation (1996-2008)

Steering wheel controls  
Lights off  
Automatic lights  
Side lights  
Dipped beam (green)  
Main beam (blue)  
DIRECTION INDICATORS  
(green flashing)  
LIGHTING CONTROL  
Dipped beam/main beam change  
Pull the stalk fully towards you.  
Left: downwards passing the  
point of resistance.  
Right: upwards passing the  
point of resistance.  
Front and rear lights  
Selection is by turning ring A.  
Lights-on buzzer  
Checking by means of the indicator  
lights on the instrument panel is  
described in the "Instruments and  
controls" section of chapter 2.  
When the ignition is switched off, when  
the driver’s door is opened, a buzzer  
sounds if you have left your lights on.  
"Motorway" function  
Press the control up or down to flash  
the corresponding direction indicator  
three times.  
Steering wheel controls  
Lights off  
Automatic lights  
Side lights  
Dipped beam (green)  
Main beam (blue)  
DIRECTION INDICATORS  
(green flashing)  
LIGHTING CONTROL  
Dipped beam/main beam change  
Pull the stalk fully towards you.  
Left: downwards passing the  
point of resistance.  
Right: upwards passing the  
point of resistance.  
Front and rear lights  
Selection is by turning ring A.  
Lights-on buzzer  
Checking by means of the indicator  
lights on the instrument panel is  
described in the "Instruments and  
controls" section of chapter 2.  
When the ignition is switched off, when  
the driver’s door is opened, a buzzer  
sounds if you have left your lights on.  
"Motorway" function  
Press the control up or down to flash  
the corresponding direction indicator  
three times.  
Steering wheel controls  
Front and rear fog lamps  
Daytime lights  
Automatic switching on of the lights  
Rotate ring B forwards to switch on and  
rearwards to switch off. The status is  
confirmed by the light on the instrument  
panel.  
These operate with the side lights and  
the dipped beam headlamps.  
The side lights  
and dipped beam  
headlamps switch  
Depending on the country in which the  
vehicle is sold, the vehicle may be equipped  
with daytime lights. The dipped headlamps  
come on when the vehicle is started.  
on automatically if  
the light is poor, or  
during operation of the windscreen  
wipers. They switch off as soon as the  
light becomes bright enough or the  
windscreen wipers stop.  
This warning light comes on  
on the instrument panel.  
This function is not compatible with the  
daytime lights.  
Front fog lamps (green,  
1st rotation of the ring  
forwards).  
The instruments and controls  
(instrument panel, display, air  
conditioning control panel, ...)  
In foggy weather or in snow,  
the brightness sensor can detect  
sufficient light. As a consequence,  
Rear fog lamps (amber,  
2nd rotation of the ring  
forwards).  
are only lit on switching to the automatic the lights will not come on automatically.  
switching on of the lights mode or when If necessary, you must switch on the  
the lights are switched on manually.  
dipped headlamps manually.  
Do not cover the brightness  
sensor located on the windscreen,  
behind the mirror. It is used for  
the automatic switching on of the lights  
and for the automatic wipers.  
To switch off the front and rear fog  
lamps, turn the ring rearwards twice  
in succession.  
In clear weather or in rain, both day  
and night, rear fog lamps dazzle and  
are prohibited.  
Activation  
Turn the ring to the AUTO position.  
The activation of this function is  
accompanied by a message on the  
display.  
Do not forget to switch them off  
when they are no longer needed.  
Automatic switching on of the lights  
switches off the rear fog lamps, but the  
front fog lamps remain on.  
Deactivation  
Turn the ring forwards or rearwards.  
The deactivation of this function is  
accompanied by a message on the  
display.  
The function is deactivated temporarily  
when you use the manual lights stalk.  
3
Steering wheel controls  
If the brightness sensor  
does not function  
correctly, the lights come on  
accompanied by the service  
warning light, an audible signal  
and a message on the display.  
Consult a CITROËN dealer.  
Follow-me-home lighting  
The temporary maintaining of the  
dipped headlamps lighting, with the  
ignition off, makes the driver’s exit  
easier when the light is poor.  
Manual operation  
HEADLAMP BEAM  
-
With the ignition off, "flash" the  
headlamps within one minute after  
switching off the ignition.  
Depending on the load in your vehicle,  
the beam setting must be adjusted.  
0 - No load.  
1 - Partial load.  
2 - Average load.  
3 - Maximum authorised load.  
The follow-me-home lighting switches  
off automatically after a set time.  
Automatic operation  
Activate the function via the  
"Vehicle config" menu.  
Initial setting is position 0.  
Refer to the "Display flow chart"  
section of chapter 4.  
Steering wheel controls  
If the brightness sensor  
does not function  
correctly, the lights come on  
accompanied by the service  
warning light, an audible signal  
and a message on the display.  
Consult a CITROËN dealer.  
Follow-me-home lighting  
The temporary maintaining of the  
dipped headlamps lighting, with the  
ignition off, makes the driver’s exit  
easier when the light is poor.  
Manual operation  
HEADLAMP BEAM  
-
With the ignition off, "flash" the  
headlamps within one minute after  
switching off the ignition.  
Depending on the load in your vehicle,  
the beam setting must be adjusted.  
0 - No load.  
1 - Partial load.  
2 - Average load.  
3 - Maximum authorised load.  
The follow-me-home lighting switches  
off automatically after a set time.  
Automatic operation  
Activate the function via the  
"Vehicle config" menu.  
Initial setting is position 0.  
Refer to the "Display flow chart"  
section of chapter 4.