STEERING WHEEL CONTROLS -> Wipers for Your Citroen Berlingo SUV First Generation (1996-2008)

Steering wheel controls  
In the AUTO position, the windscreen  
wipers operate automatically and adapt  
their speed to theintensityof the rainfall.  
When not in AUTO mode, for the  
other positions, refer to the manual  
windscreen wipers section.  
Activation  
Press the control downwards. Activation  
of the function is accompanied by  
a message on the display.  
The automatic windscreen wipers  
function must be reactivated if the  
ignition has been switched off for more  
than one minute, by pressing the stalk  
downwards.  
Deactivation/Switching off  
Place the windscreen wipers stalk in  
position I, 1 or 2. Deactivation of the  
function is accompanied by a message  
on the display.  
In the event of malfunction of the  
automatic windscreen wipers, the  
windscreen wipers will operate in  
intermittent mode.  
WINDSCREEN WIPER STALK  
Manual windscreen wipers  
Whenever the ignition has been  
switched off for more than one  
minute,with the windscreen wiper stalk  
inposition 2, 1 or I, the stalk must be  
reactivated:  
2
1
l
Fast wipe (heavy rain).  
Normal wipe (moderate rain).  
Intermittent wipe.  
Off.  
-
-
move the stalk to any position,  
then move it back to the required  
position.  
0
Contact a CITROËN dealer to have the  
system checked.  
Single wipe  
(press downwards).  
In the Intermittent position, the wiping  
speed is in proportion to the vehicle  
speed.  
When using an automatic car  
wash, switch off the ignition to  
avoid triggering of the automatic  
wiping.  
Automatic windscreen wipers  
Do not cover the rain sensor,  
located in the centre of the  
windscreen, behind the mirror. windscreen to completely clear of ice  
In winter, it is advisable to wait for the  
before operating the automatic wipe.  
3
Steering wheel controls  
Wash-wipe and headlamp wash  
Pull the stalk towards you, the wash-wipe  
is accompanied by a timed sweep of the  
wipers.  
The headlamp wash is linked with the  
wash-wipe, it is triggered if the dipped  
headlamps are on.  
To top up the levels, refer to the  
"Levels" section of chapter 7.  
Special position of the  
windscreen wipers  
In the minute following switching  
off of the ignition, any action on the  
stalk positions the wipers against the  
windscreen uprights.  
This action enables you to position  
the wiper blades for winter parking,  
cleaning or replacement.  
Rear windscreen wiper  
Rear windscreen wash  
Turn the ring to the first notch.  
Turn the ring past the first  
notch: the windscreen wash  
then the windscreen wiper  
operate for a fixed time.  
Refer to the "Changing a  
windscreen wiper blade" section of  
chapter 8.  
To park the wipers in their normal  
position after this has been done, switch  
on the ignition and move the stalk.  
In winter, in the event of a  
considerable amount of snow  
or ice, switch on the rear screen  
demister. Once de-icing is complete,  
remove the snow or ice which has  
accumulated on the rear wiper  
blade. You can then operate the rear  
windscreen wiper.