Instruments
Total distance recorder
Coolant temperature indicator
For more information on Checking
levels, refer to the corresponding
section.
Checking
After driving for a few minutes, the temperature
and pressure in the cooling system increase.
To top up the level:
► wait at least one hour for the engine to cool,
► unscrew the cap by two turns to allow the
pressure to drop,
This measures the total distance travelled by the
vehicle since its initial registration.
Trip distance recorder
► when the pressure has dropped, remove the
cap,
► top up the level to the "MAX" mark.
For more information on Checking levels, refer
to the corresponding section.
This measures the distance travelled since it was
last reset by the driver.
Resetting the trip recorder
With LCD symbols and LCD text or matrix
instrument panel
With the engine running:
Be aware of the risk of scalding when
topping up the coolant. Do not fill above
the maximum level (indicated on the
reservoir).
– In zone A, the temperature is correct.
– In zone B, the temperature is too high.
The associated warning lamp and the
STOP warning lamp light up in red on the
instrument panel, accompanied by the display of
a message and an audible signal.
You must stop the vehicle as soon as it is
safe to do so.
Engine oil level indicator
(Depending on version)
On versions fitted with an electric gauge, the
engine oil level status is displayed on the
instrument panel for a few seconds when the
ignition is switched on, at the same time as the
servicing information.
► With the ignition on, press the button until
zeros appear.
Wait a few minutes before switching off the
engine.
After switching off the ignition, carefully
open the bonnet and check the coolant
level.
22
English 