Advertisement

Advertisement

Instruments -> Instrument panel display screen for Your Citroen Berlingo SUV Third Generation (2018-2025)

Instruments  
Have your vehicle serviced very soon.  
If you have to disconnect the battery  
following this operation, lock the vehicle  
and wait at least 5 minutes for the reset to be  
registered.  
1
Service spanner flashing  
Flashing then fixed, when the  
ignition is switched on.  
(With BlueHDi Diesel engines, associated with  
the Service warning lamp.)  
Reminder of the servicing information  
The servicing interval has been exceeded.  
Have your vehicle serviced as soon as possible.  
You can access the servicing information at any  
time.  
With LCD symbols and LCD text or matrix  
instrument panel  
► Press the trip distance recorder reset button.  
With digital instrument panel  
You can view the servicing information by  
pressing the "Check" button in the  
Driving/Vehicle touch screen menu.  
The servicing information is displayed for a few  
seconds, then disappears.  
Resetting the service indicator  
The service indicator must be reset after each  
service.  
► Switch the ignition off.  
With LCD symbols and LCD text or matrix  
instrument panel  
With the vehicle stationary, use the left-hand  
thumbwheel on the steering wheel or the "SET"  
button on the instrument panel to move through  
the menus to configure certain vehicle settings.  
Thumbwheel operation:  
– Press: open the Main menu; confirm the  
selection.  
– Rotate (other than in a menu): scroll through  
the list of available active functions.  
– Rotate (in a menu): move up or down in the  
menu.  
Instrument panel display screen  
With LCD symbols and LCD text or matrix  
instrument panel  
With digital instrument panel  
You can configure some of the vehicle's  
settings by pressing the "Check" button in  
the Driving/Vehicle touch screen menu.  
► Press and hold this button.  
► Switch on the ignition; the distance recorder  
display begins a countdown.  
► Release the button when =0 is displayed; the  
spanner disappears.  
With digital instrument panel  
The service indicator is reset using the  
"Check" button in the Driving/Vehicle  
touch screen menu.  
Distance recorders  
The total and trip distances are displayed for  
thirty seconds when the ignition is switched off,  
when the driver's door is opened and when the  
vehicle is locked or unlocked.  
21