Advertisement

Advertisement

Instruments -> Service indicator for Your Citroen Berlingo SUV Third Generation (2018-2025)

Instruments  
The vehicle is being braked; the brake lamps  
come on during the descent.  
Blue warning/indicator lamps  
Indicators  
Main beam headlamps  
Fixed.  
Eco mode (Petrol or Diesel)  
Fixed.  
ECO mode is active.  
Some parameters are adjusted to reduce the fuel  
consumption.  
Service indicator  
The servicing information is expressed in terms  
of distance (miles or kilometres) and time  
(months or days).  
The alert is given at whichever of these two  
terms is reached first.  
The servicing information is displayed in the  
instrument panel. Depending on the version of  
the vehicle:  
– The distance recorder display line indicates  
the distance remaining before the next service  
is due, or the distance travelled since it was due  
preceded by the "-" sign.  
– An alert message indicates the distance  
remaining, as well as the period before the next  
service is due or how long it is overdue.  
The lamps are on.  
Black/white warning lamps  
Foot on the brake  
Fixed.  
Automatic wiping  
Insufficient or no pressure on the brake  
pedal.  
With the automatic gearbox or the drive selector,  
it may be necessary to depress the brake pedal  
to unlock the gearbox from mode N.  
Fixed.  
Automatic windscreen wiping is activated.  
Front foglamps  
Fixed.  
The front foglamps are on.  
Foot on the clutch  
Sidelamps  
Fixed.  
Fixed.  
Stop & Start: the change to START mode  
is rejected because the clutch pedal is not fully  
depressed.  
The lamps are on.  
Direction indicators  
Flashing with audible signal.  
The direction indicators are on.  
Fully depress the clutch pedal.  
The value indicated is calculated  
according to the distance covered and  
the time elapsed since the last service.  
The alert may also be triggered close to a  
due date.  
Automatic wiping  
Fixed.  
Dipped beam headlamps  
Fixed.  
Automatic front wiping is activated.  
The lamps are on.  
Hill Assist Descent Control  
Fixed.  
Automatic headlamp dipping  
Fixed.  
The function has been activated  
via the touch screen (Driving/Vehicle menu).  
The lighting control stalk is in the "AUTO"  
position.  
(grey)  
Service spanner  
The function has been activated, but is currently  
paused because the speed is too high.  
Reduce the vehicle speed to below 19 mph  
(30 km/h).  
On temporarily when the ignition is  
switched on.  
Between 620 and 1,860 miles (1,000 and 3,000  
km) remain before the next service is due.  
Fixed, when the ignition is switched on.  
The next service is due in less than 620  
miles (1,000 km).  
For more information, refer to the Lighting and  
visibility section.  
20  
Instruments  
Have your vehicle serviced very soon.  
If you have to disconnect the battery  
following this operation, lock the vehicle  
and wait at least 5 minutes for the reset to be  
registered.  
1
Service spanner flashing  
Flashing then fixed, when the  
ignition is switched on.  
(With BlueHDi Diesel engines, associated with  
the Service warning lamp.)  
Reminder of the servicing information  
The servicing interval has been exceeded.  
Have your vehicle serviced as soon as possible.  
You can access the servicing information at any  
time.  
With LCD symbols and LCD text or matrix  
instrument panel  
► Press the trip distance recorder reset button.  
With digital instrument panel  
You can view the servicing information by  
pressing the "Check" button in the  
Driving/Vehicle touch screen menu.  
The servicing information is displayed for a few  
seconds, then disappears.  
Resetting the service indicator  
The service indicator must be reset after each  
service.  
► Switch the ignition off.  
With LCD symbols and LCD text or matrix  
instrument panel  
With the vehicle stationary, use the left-hand  
thumbwheel on the steering wheel or the "SET"  
button on the instrument panel to move through  
the menus to configure certain vehicle settings.  
Thumbwheel operation:  
– Press: open the Main menu; confirm the  
selection.  
– Rotate (other than in a menu): scroll through  
the list of available active functions.  
– Rotate (in a menu): move up or down in the  
menu.  
Instrument panel display screen  
With LCD symbols and LCD text or matrix  
instrument panel  
With digital instrument panel  
You can configure some of the vehicle's  
settings by pressing the "Check" button in  
the Driving/Vehicle touch screen menu.  
► Press and hold this button.  
► Switch on the ignition; the distance recorder  
display begins a countdown.  
► Release the button when =0 is displayed; the  
spanner disappears.  
With digital instrument panel  
The service indicator is reset using the  
"Check" button in the Driving/Vehicle  
touch screen menu.  
Distance recorders  
The total and trip distances are displayed for  
thirty seconds when the ignition is switched off,  
when the driver's door is opened and when the  
vehicle is locked or unlocked.  
21