Advertisement

Advertisement

Practical information -> Advice on care and maintenance for Your Citroen Berlingo SUV Third Generation (2018-2025)

Practical information  
► Depress and hold the brake pedal, then  
observe this order: switch off the engine and  
move the push selector forwards or backwards.  
► Release the brake pedal, then switch on the  
ignition.  
► Place your foot on the brake and press the  
electric parking brake control to release it.  
► Release the brake pedal, then switch off the  
ignition.  
Exterior  
Never use a high-pressure jet wash in  
the engine compartment - risk of  
damaging the electrical components!  
Do not wash the vehicle in bright sunshine or  
extremely cold conditions.  
With an automatic gearbox  
and electric parking brake  
/
To release them  
► With the engine running and while depressing  
the brake pedal, set the gear selector to N.  
► While depressing the brake pedal, switch off  
the engine.  
► Release the brake pedal, then switch on the  
ignition again.  
► While depressing the brake pedal, press the  
control lever to release the parking brake.  
► Release the brake pedal, then switch off the  
ignition.  
When washing the vehicle in an  
automatic roller-brush car wash, be sure  
to lock the doors and, depending on version,  
move the electronic key away.  
When using a pressure washer, keep the jet  
nozzle at a minimum distance of 30 cm from  
the vehicle (particularly when cleaning areas  
containing chipped paint, sensors or seals).  
Promptly clean up any stains containing  
chemicals liable to damage the vehicle's  
paintwork (including tree resin, bird  
droppings, insect secretions, pollen and tar).  
Depending on the environment, clean the  
vehicle frequently to remove salty deposits  
(in coastal areas), soot (in industrial areas)  
and mud/salts (in wet or cold areas). These  
substances can be highly corrosive.  
Contact a CITROËN dealer or a qualified  
workshop for advice on removing stubborn  
stains requiring special products (such as tar  
or insect removers).  
A message is displayed on the  
instrument panel to confirm the unlocking  
of the wheels for 15 minutes.  
When the vehicle is free-wheeling, the  
audio system cannot be updated (message  
displayed on the instrument panel).  
After 15 minutes or reverting to normal  
operation  
Reverting to normal operation  
► While depressing the brake pedal, restart the  
engine and select mode P.  
► While depressing the brake pedal, restart the  
engine and select mode P.  
With drive selector and  
electric parking brake  
Advice on care and  
maintenance  
/
General recommendations  
Observe the following recommendations to avoid  
damaging the vehicle.  
Release procedure  
► With the vehicle stationary and the engine  
running, depress the brake pedal and select  
mode N.  
Preferably, have paint touch-ups performed  
by a CITROËN dealer or a qualified  
workshop.  
Within 5 seconds:  
200  
Practical information  
Interior  
Comply with the instructions for use stated on  
the product.  
7
When washing the vehicle, never use a  
water hose or high-pressure jet to clean  
the interior.  
Liquids carried in cups or other open  
containers can spill, presenting a risk of  
damage to the instruments and controls and  
the controls located on the centre console. Be  
vigilant!  
Decals  
(Depending on version)  
Do not use a high-pressure washer to  
clean the vehicle - risk of damaging or  
detaching the decals!  
To clean instrument panels, touch screens  
or other displays, wipe gently with a soft,  
dry cloth. Do not use products (e.g. alcohol,  
disinfectant) or soapy water directly on these  
surfaces - risk of damage!  
Use a high-flow hose (temperature  
between 25°C and 40°C).  
Place the jet of water perpendicular to the  
surface to be cleaned.  
Rinse the vehicle with demineralised water.  
Bodywork  
High-gloss paint  
Do not use abrasive products, solvents,  
petrol or oil to clean the bodywork.  
Never use an abrasive sponge to clean  
stubborn stains - risk of scratching the  
paintwork!  
Do not apply polish in strong sunshine, or to  
plastic or rubber parts.  
Use a soft cloth and soapy water or a pH  
neutral product.  
Gently wipe the bodywork with a clean  
microfibre cloth.  
Apply polish with the vehicle clean and dry.  
201