Practical information
Do not leave the vehicle unattended
AdBlue, it is essential to wait around 5
minutes before switching on the ignition,
without opening the driver’s door,
unlocking the vehicle, inserting the key
into the ignition switch, or bringing the
key for the "Keyless Entry and Start"
system into the passenger compartment.
Switch on the ignition, then wait for 10
seconds before starting the engine.
In order not to overfill the AdBlue® tank:
– Add between 10 and 13 litres using
AdBlue® containers.
– Stop after the nozzle’s first automatic cut-
out, if you are refilling at a service station.
The system only registers AdBlue® top-ups of
5 litres or more.
7
while coasting.
Keyless Entry and Start
You must not depress the brake pedal
while switching the ignition on again, then
switching it off. If you do, the engine will start,
requiring you to restart the procedure.
If the AdBlue® tank is completely empty
– which is confirmed by the message
“Top up AdBlue: Starting impossible” – it is
essential to add at least 5 litres.
► Switch off the ignition and remove the key
from the switch to switch off the engine.
or
With a manual gearbox and
electric parking brake
/
► With Keyless Entry and Start, press the
"START/STOP" button to switch off the engine.
After refilling
To release them
► Refit the blue cap to the tank filler and turn it
clockwise, as far as it will go.
► Close the fuel filler flap.
► With the engine running and while depressing
the brake pedal, move the gear selector to the
neutral position.
► While depressing the brake pedal, switch off
the engine.
Do not dispose of AdBlue® bottles or
containers in the household waste.
Place them in a container reserved for this
purpose or take them back to where you
purchased them.
► With the vehicle unlocked and the fuel filler
flap open, turn the blue cap of the AdBlue® tank
anti-clockwise and remove it.
► With a container of AdBlue®: after checking
the expiry date, read the instructions on the
label carefully before pouring the contents of the
container into the vehicle's AdBlue tank.
► With an AdBlue® pump: insert the nozzle and
fill the tank until the nozzle automatically cuts
out.
► Release the brake pedal, then switch on the
ignition.
► While depressing the brake pedal, press the
control to release the parking brake.
► Release the brake pedal, then switch off the
ignition.
Free-wheeling
In certain situations, it is necessary to put the
vehicle into free-wheeling mode (e.g. towing, on
a rolling road, automatic car wash (Wash mode),
rail or sea transport).
Reverting to normal operation
► While depressing the brake pedal, restart the
engine and apply the parking brake.
The procedure varies according to the type of
gearbox and parking brake.
199
English 