Driving
In the event of the speed limit change
sound deactivation, this warning lamp
lights up a few seconds on the instrument
panel.
This system cannot be modified.
2. Pause/Reactivate the speed limitation at the
previously saved speed setting
3. Increase/Decrease the speed setting
Activate the speed limitation
Speed limiter
For more information, refer to the
General recommendations on the use
of driving and manoeuvring aids.
Malfunction
Information displayed on
the instrument panel
In the event of a malfunction, this
warning lamp lights up on the
instrument panel.
Have it checked by a CITROËN dealer or a
qualified workshop.
This warning lamp lights up on the
instrument panel with the message
"Driving Assistance Sensor blind: Clean
sensor" if the sensor is masked.
This is a normal behavior, which does not
request the support of a qualified workshop.
In this case, stop the vehicle and verify if the
front camera is covered by dirt, mud, sand,
snow, ice or anything preventing the sensing.
The system is operational again after the
detection field has been cleaned.
This system prevents the vehicle from
exceeding the speed programmed by
the driver (speed setting).
The speed limiter is switched on manually.
The minimum speed setting is 19 mph
(30 km/h).
4. Speed limiter mode selection indication
5. Speed limitation on/off indication
6. Speed setting value
Steering-mounted controls
Switching on/Pausing
Overspeed alert
(Depending on country of sale)
►ꢀ Press twice button 1-MODE to select speed
An audible overspeed alert is triggered
when the vehicle exceeds predefined speed
threshold.
limiter mode ; the function is paused.
When the vehicle speed is greater than 75 mph
(120 km/h), the alert is emitted every 2 seconds.
1. Speed limiter selection/deselection
►ꢀ If the speed limit setting is suitable (most
recent speed setting programmed in the
104
English 
