Lighting and visibility
The inner surface of the windscreen
may become misted up and affect the
proper operation of the rain/sunshine sensor.
In humid and cold weather, demist the
windscreen regularly.
Manual
Switching on/off
4
Guide-me-home and
welcome lighting
►ꢀ To activate it, turn the ring to the "AUTO"
position.
►ꢀ To deactivate it, turn the ring to any other
position.
When the function is activated or deactivated,
a message is displayed (depending on version).
Guide-me-home lighting
Automatic
►ꢀ With the ignition off, pull the lighting
control stalk toward you ("headlamp flash") to
activate/deactivate the function.
Manual guide-me-home lighting goes off
automatically after a period of time.
With the ring of the lighting control stalk in the
"AUTO" position and when the light is poor, the
sidelamps and dipped beam headlamps come
on automatically when the ignition is switched
off.
You can activate/deactivate this function and
adjust the guide-me-home lighting duration
via the instrument panel, using the steering-
mounted controls.
Malfunction
In the event of a malfunction of the rain/
sunshine sensor, the vehicle’s lamps come
on and this warning lamp is displayed on the
instrument panel, accompanied by an audible
signal and/or the display of a message.
Have it checked by a CITROËN dealer or a
qualified workshop.
Welcome lighting
With the "Automatic headlamp illumination"
function activated, in poor light, the sidelamps
and dipped beam headlamps come on
automatically when the vehicle is unlocked.
Activation, deactivation and the duration of the
exterior welcome lighting are set in the vehicle
configuration menu.
Do not cover the rain/sunshine sensor
located at the top centre of the
windscreen behind the interior rear view
mirror; the associated functions would no
longer be controlled.
In fog or snow, the rain/sunshine
sensor may detect sufficient light. For
this reason, the lighting will not come on
automatically.
55
English 
