Lighting and visibility
Operating limits
The system may be disrupted or not
work correctly:
– When visibility conditions are poor
(e.g. snowfall, heavy rain).
– If the windscreen is dirty, misted-up or
masked (e.g. sticker) in front of the camera.
– If the vehicle is facing highly reflective
signs or safety barrier reflectors.
The system is not able to detect:
– Road users that do not have their own
lighting, such as pedestrians.
– Vehicles with hidden lighting
(e.g. travelling behind a safety barrier on the
motorway).
Headlamp beam height
adjustment
Automatic headlamp
dipping
For more information, refer to the
General recommendations for
automatic lighting systems.
Available only on versions equipped with LED
technology headlamps.
With the ring of the lighting control stalk in the
"AUTO" position and the function activated
on the touch screen, this system automatically
switches between dipped and main beam
headlamps, according to lighting and traffic
conditions, using a camera located at the top of
the windscreen.
To avoid dazzling other road users, the height
of the headlamp beams must be adjusted
according to the load in the vehicle.
0
(Initial setting)
Driver only or driver + front passenger
– Vehicles at the top or bottom of a steep
slope, on winding roads, on crossroads.
1
5 to 7 people
2
3
5 to 7 people + load in the boot
Driver only + load in the boot
Maintenance
Clean the windscreen regularly,
particularly the area in front of the camera.
The internal surface of the windscreen can
also become misted around the camera.
In humid and cold weather, demist the
windscreen regularly.
4 5 6 Not used
This information is provided as a guide only.
Depending on version, the unused positions
may be required.
Do not allow snow to accumulate on the
bonnet or roof of the vehicle as this could
obstruct the camera.
Automatic lighting
systems - General
recommendations
The automatic lighting systems use a detection
camera, located at the top of the windscreen.
56
English 
