Practical information
F With the vehicle unlocked and the fuel filler
flap open, turn the AdBlue® blue filler cap
anti-clockwise.
F Obtain a container of AdBlue®. After first
checking the use-by date, read carefully
the instructions on use on the label before
pouring the contents of the container into
your vehicle's AdBlue® tank.
Advice on care and
maintenance
For the care of the stickers in the rear door
windows, we recommend the following:
-
Use a wide jet at a temperature of
between 25°C and 40°C.
Recommendations on the care and
maintenance of your vehicle are given in the
Maintenance and Warranty Guide.
-
Where possible, direct the jet at right
angles to the stickers.
Leather
Leather is a natural product. Appropriate
regular care and cleaning is essential for its
durability.
Or
F Insert the AdBlue® pump nozzle and fill the
tank until the nozzle stops automatically.
Refer to your vehicle's Maintenance and
Warranty Guide for information on all the
special precautions to observe.
Important:
To prevent the AdBlue® tank from
overflowing, it is recommended:
F To top up between 10 and 13 litres
using AdBlue® containers.
Or
F If filling in a service station, stop after
the third automatic shut-off of the
nozzle.
Care of the stickers
These styling stickers are treated to give good
resistance to ageing and tearing.
They have been designed to allow you to
customise your vehicle's bodywork.
When using a high pressure jet wash, keep the
end of the lance at least 30 centimetres from
the stickers.
F After refilling, carry out these same
operations in reverse order.
152
English 