In the event of a breakdown
► Unclip the unit by pushing the base from
behind.
► Remove the bulb t and change it.
► Put the unit back in place.
► Unclip the cover by pulling at the top left, then
right.
► Disengage the cover fully and turn it over.
► Remove the tweezers from the back of the
cover.
malfunction of your vehicle. Contact a
CITROËN dealer or a qualified workshop.
8
Changing a fuse
Changing a fuse
Before changing a fuse:
Access to tooling
The extraction tweezers are fitted to the back of
► Identify the cause of the fault and fix it.
► Stop all power consumption.
Good
Failed
the dashboard fusebox cover.
► Immobilise the vehicle and switch the ignition
off.
► Identify the defective fuse using the current
allocation tables and diagrams.
Tweezers
To replace a fuse, it is essential to:
► Use the special tweezers to extract the fuse
from its housing and check the condition of its
filament.
Installing electrical accessories
Your vehicle's electrical system is
designed to operate with standard or optional
equipment.
► Always replace the failed fuse with a fuse of
the same rating (same colour); use of a different
rating may cause malfunctions - risk of fire!
If the fault recurs after replacing a fuse, have the
electrical system checked by a CITROËN dealer
or a qualified workshop.
Before installing other electrical equipment
or accessories on your vehicle, contact a
CITROËN dealer or a qualified workshop.
CITROËN accepts no responsibility for
the cost incurred in repairing your vehicle
or for rectifying malfunctions resulting from
the installation of accessories not supplied
and not recommended by CITROËN and not
installed in accordance with specifications, in
particular when the combined power
The fuse allocation tables and the
corresponding diagrams are available
from a CITROËN dealer or from a qualified
workshop.
consumption of all of the additional equipment
connected exceeds 10 milliamperes.
The replacement of a fuse not shown in
the allocation tables may cause a serious
119
English 