04 MUSIC
CD, MP3 CD / USB player
Information and advice
The audio equipment will only play audio files with ".wma, .aac,
.flac, .ogg and .mp3" file extensions and with a bit rate of between
32 Kbps and 320 Kbps.
It also supports VBR (Variable Bit Rate) mode.
No other type of file (.mp4, ...) can be played.
WMA files must be of the standard wma 9 type.
The sampling rates supported are 11, 22, 44 and 48 KHz.
The system supports USB mass storage devices, BlackBerry®
devices or Apple players via the right hand USB port. The adaptor
cable is not supplied.
Control of the peripheral device is with the audio system controls.
Other peripherals, not recognised on connection, must be connected
to the auxiliary socket using a Jack cable (not supplied).
In order to be read, a USB memory stick must be formatted
FAT 16 or 32.
It is advisable to restrict file names to 20 characters, without using of
special characters (e.g.: " " ? ; ù) to avoid any playing and displaying
problems.
The system does not support two identical devices connected at the
same time (two memory sticks, two Apple® players) but it is possible to
connect one memory stick and one Apple® player at the same time.
In order to be able to play a recorded CDR or CDRW, when
recording it is preferable to select the ISO 9660 level 1, 2 or Joliet
standard.
If the disc is recorded in another format it may not be played
correctly.
It is recommended that the same recording standard is always used
for an individual disc, with as low a speed as possible (4x maximum)
for optimum sound quality.
It is recommended that official Apple® USB cables are used to
ensure correct operation.
In the particular case of a multi-session CD, the Joliet standard is
recommended.
353
English 