GROUND CLEARANCE ADJUSTMENT
Maximum height
Changing a wheel.
III
Intermediate position
For an increased ground clearance.
For use on difficult roads when travel-
ling at reduced speed, as well as on
carpark ramps.
Position changes may only be
made when the engine is running.
The ground clearance is adjusted
automatically. You can however
modify the vehicle height in cer-
tain specific cases.
Normal road position
To change the position
Press once on one of the adjust-
ment controls. The change of
position is indicated at the start
of the adjustment by:
A message or
Minimum height
Temporary display of the initial
position with the symbol for the
position requested.
To facilitate loading or unloadng the
vehicle.
For workshop inspections.
Note: You are recommended to
avoid any changing of position while
you have your foot on the brake.
Not to be used in normal driving.
Viewing of the position of the
vehicle
On completion of the adjustment
you see either a message or an
illustration of the position attained
by the vehicle, with the appropriate
symbol.
For your safety if you are operating underneath the vehicle,
it is obligatory to support the vehicle with axle stands.
Display of the position requested confirms the completion of
the adjustment.
107
English 