Get COMFORT AND SAFETY -> Rear seats Guide for Citroen C6 4 Door Second Generation (2016-2023)

REAR SEATS

III

C

D

REAR HEAD RESTRAINTS

The rear head restraints have two

positions:

CONTROLS FOR HEATED

SEATS IN A BENCHSEAT

The rear seats can be heated inde-

pendently of each other.

Use the controls C located under

the rear storage tray to activate the

heating.

CONTROLS FOR PACK

LOUNGE HEATED SEATS

The Pack Lounge seats can be heated

independently of each other.

Use the controls D located on the

outside of the seats to select any

of three heating levels:

•

A stowed position for when the

seat is not occupied.

A deployed position for safety

of passengers, locking into

place including for a forward-

facing child seat

To lower the head retraints, press

on the tab at the base.

To raise them, pull them upwards

to their maximum height, pressing

the unlocking button.

0: Off.

1: Slight heat.

2: Medium heat.

3: Maximum heat.

The seat temperature adjusts auto-

matically.

Note: The heated seats only ope-

rate when the engine is running.

97

REAR SEATS

III

1

2

FOLDING BENCHSEAT

The whole or just part of the benchseat can be folded. It is necessary to

remove the head restraints.

FLAP FOR TRANSPORT OF

LONG OBJECTS

A ﬂap in the backrest, located to

the rear of the armrest, facilitates

the carrying of long objects.

Seat cushion

Use the strap to lift the seat cushion, then rest it against the front seat back-

rests. When repositioning the seat cushion, make sure that the seat belt

buckles are correctly in place.

Before installing any long objects,

fold the interior blind and then

make sure that the loads are

properly secured, not obstructing

the movements of the gear lever.

This ﬂap can be concealed bymeans

of a foldable cover with a tab.

98

REAR SEATS

D

A

III

B

C

LOCKING/UNLOCKING OF THE ACCESS INTO THE BOOT VIA

THE REAR BENCHSEAT

REAR CENTRAL SEAT BELT

For easier opening of the seat belt

v

central head restraint.

D, you should ﬁrst raise the

Seat cushion folded.

Stow the head restraints.

Press the control A located at the

end of the backrest and fully tilt

forwards.

The benchseat backrest can be

folded in two sections. When you

reposition the backrest, make sure

that it locks in place.

Your vehicle's boot can be kept

isolated from the passenger com-

partment.

To lock the access to the boot:

1. Place the benchseat in its

correct position.

Insert the ﬁrst fastening C into the

front left hand (black) buckle, then

insert the second fastening B into

the front right hand buckle.

The red warning lamp on

control A should no longer be

visible.

2. Insert the ignition key in the

lock.

3. Lock it.

Before moving the seats

So as to avoid damaging the seat belts by jamming them, take

care to keep them to the sides of the backrest.

99

COMFORT AND SAFETY -> Rear seats for Your Citroen C6 4 Door Second Generation (2016-2023)

Related Topics

COMFORT AND SAFETY

Popular Owner Manuals

Latest Owner Manuals