Get COMFORT AND SAFETY -> Programmable heating Guide for Citroen C6 4 Door Second Generation (2016-2023)

PROGRAMMABLE HEATING

Remote control

Display of functions

III

The remote control for the program-

mable heating system includes the

following buttons and display infor-

mation:

1. Menu function scroll buttons.

2. Function symbols: clock,

temperature, operating

duration, programmed time,

heater operation, heater

control.

3. Digital display of: time,

temperature, operating

duration, programmed time or

heating level.

4. Off button.

5. On button.

Press buttons 1 repeatedly to bring

up the functions.

The ﬁrst press of the right or left

button displays the time.

The programmable heating sys-

tem operates independently of the

engine.

With the engine off, it is used to

preheat the engine cooling system

so as to have an optimum engine

operating temperature on starting.

The programmable heating system

is started using a long-range remote

control. It can be started immediately

or programmed to start later.

The left button then gives access

to the programming time, then the

heating level (C1 to C5).

The right button gives access to

the cabin temperature, then the

operating duration of the heater

where the system is to be started

immediately.

Information displayed in the remote

control screen

Information on the cabin tempe-

rature is only available with the

engine off.

In the event of a malfunction of

the programmable heating sys-

tem, contact a CITROËN dealer

or a qualiﬁed workshop.

93

PROGRAMMABLE HEATING

Setting the time

Immediate start

Adjusting the operating

duration

III

After displaying the time, using

buttons 1, within 10 seconds press

buttons 4 and 5 simultaneously.

Press button 5 (ON) until the "OK"

messa e appears.

When the signal has been received,

the "OK" message is displayed

together with the operating duration.

Press buttons 1 to display the ope-

rating duration.

This symbol is displayed.

This symbol ﬂashes.

After displaying the operating

duration, within 10 seconds press

buttons 4 and 5 simultaneously.

The heater starts and this

symbol is displayed.

Set the time using buttons 1. Press

buttons 4 and 5 simultaneously to

store the setting.

To stop operation, press button 4

(OFF) until the "OK"

This symbol ﬂashes.

a

ears

This symbol is displayed

(constant).

Set the duration using buttons 1

(adjustment in steps of 10 mins up

to a maximum of 30 mins).

This symbol goes off.

Press buttons 4 and 5 simultane-

ously to store the duration setting.

If the "FAIL"

during these operations, this indi-

cates that the signal was not

received. Go to a different location

and then repeat the procedure.

This symbol is displayed

(constant).

The factory setting is 30 minutes.

94

PROGRAMMABLE HEATING

Programming the heater

Activation – deactivation

Stopping the heater

You should programme your depar-

ture time so that the system can

automatically calculate the opti-

mum start time for the heater.

After displaying the programme time

using buttons 1, press button 5 (ON)

until the "OK" message appears.

Press button 5 (ON).

The "HTM" symbol stays on.

III

When the signal has been

received, the "OK" messa e

is displayed together with the

"HTM" symbol.

Modiﬁcation of the heating

level

The system offers 5 levels of heat-

ing (C1, the lowest level, to C5, the

highest level).

This symbol is displayed

when the heater starts.

After displaying the heating level

using buttons 1, press buttons 4

and 5 simultaneously.

The letter "C" ﬂashes.

Adjust the level of heating using

buttons 1

Press buttons 4 and 5 simultane-

ously to store the level setting cho-

sen. The letter "C" is displayed

(constant).

HTM: Heat Thermo Management

(heater control system).

Programming your

departure time

Press buttons 1 to display the pro-

To cancel a programme, press but-

ton 4 (OFF) until the "OK" messa e

gramme time.

This symbol is displayed.

The "HTM" symbol goes off.

After displaying the programme

time, within 10 seconds press but-

tons 4 and 5 simultaneously.

The factory settings are replaced

by the new values entered. The

times programmed are memorised

until the next modiﬁcation.

When the departure time is acti-

vated, it is not possible to modify

the heating level. The departure

time should ﬁrst be deactivated.

If the "FAIL" messa e appears

during these operations, this indi-

cates that the signal was not

received.

Go to a different location and then

repeat the procedure.

This symbol ﬂashes.

Adjust the time by pressing buttons 1

and press buttons 4 and 5 simultane-

ously to store the setting.

This symbol is displayed (constant).

95

PROGRAMMABLE HEATING

Re-initialisation of the

remote control

III

If the battery is disconnected or

replaced, the remote control must

be re-initialised.

Always switch off the program-

mable heating while refuelling in

order to avoid the risk of ﬁre or

explosion.

After switching on, within ﬁve sec-

onds press button 4 (OFF) for

1 second.

To avoid the risk of intoxication

or asphyxiation, the program-

mable heating should not be

used, even for a short time, in

an enclosed space such as a

garage, or workshop without

exhaust gas extraction.

Do not park the vehicle over

inﬂammable materials (dry grass,

dead leaves, papers…), as there

is a risk of ﬁre.

If the operation is successful, the

"OK" message appears in the

remote control screen.

If not, the "FAIL" messa e appears.

Repeat the procedure.

As a secondary advantage, use of

your programmable heating sys-

tem allows it to be used to pre-heat

the passenger compartment.

Replacing the battery

The remote control is powered

by a 6V-28L battery cell, which is

included.

Information appears on the screen

when this battery should be replaced.

Unclip the casing and replace the

battery.

The remote control must then be

re-initialised, as described on this

The programmable heating sys-

tem is supplied by the vehicle’s

fuel tank. Before using it, ensure

that there is sufﬁcient fuel in the

tank. If the low fuel warning lamp

is on we strongly recommend

that you do not programme the

heating to come on.

Do not discard old batteries; take

them to an approved recycling

point.

96

COMFORT AND SAFETY -> Programmable heating for Your Citroen C6 4 Door Second Generation (2016-2023)

Related Topics

COMFORT AND SAFETY

Popular Owner Manuals

Latest Owner Manuals