Advertisement

Advertisement

Practical Information -> Changing a bulb for Your Citroen Ds3 SUV Second Generation (2018-2025)

RACING tyres  
driving in winter conditions  
The 215/40 R18 89W tyres fitted as standard  
are not suitable for severe winter conditions.  
We recommend that you use suitable winter  
tyres during periods of very cold weather.  
If you want to fit snow chains or  
snow socks to your vehicle, contact  
a CITROËN dealer for advice on the  
tyres recommended for your vehicle.  
F
F
Lower the vehicle fully.  
Fold the jack 2 and detach it.  
F
Tighten the security bolt (if your vehicle is  
fitted with them) using the wheelbrace 1  
fitted with the socket 4.  
F
F
F
Tighten the other bolts using the  
wheelbrace 1 only.  
Refit the chromed bolt covers on each of  
the bolts (with alloy wheels only).  
Store the tools in the box.  
207  
Practical information  
Snow chains  
In wintry conditions, snow chains improve traction as well as the behaviour of the vehicle when braking.  
Advice on installation  
The snow chains must be fitted only  
F
If you have to fit the chains during a journey, stop the vehicle on a flat surface on the side of the  
road.  
Apply the parking brake and position any wheel chocks to prevent movement of your vehicle.  
Fit the chains following the instructions provided by the manufacturer.  
Move off gently and drive for a few moments, without exceeding 30 mph (50 km/h).  
Stop your vehicle and check that the snow chains are correctly tightened.  
to the front wheels. They must never  
be fitted to "space-saver" type spare  
wheels.  
F
F
F
F
Take account of the legislation in force  
in your country on the use of snow  
chains and the maximum running  
speed authorised.  
Use only the chains designed to be fitted to the type of wheel fitted to your vehicle:  
Vehicle  
Original tyre size  
Maximum link size.  
9 mm  
Avoid driving with snow chains on  
roads that have been cleared of snow,  
to avoid damaging your vehicle's tyres  
and the road surface. If your vehicle  
is fitted with alloy wheels, check that  
no part of the chain or its fixings is in  
contact with the wheel rim.  
185/65 R15  
195/55 R16  
205/45 R17  
215/40 R18  
DS 3  
cannot be fitted with chains  
cannot be fitted with chains  
DS 3 RACING  
It is strongly recommended that before  
you leave, you practise fitting the snow  
chains on a level and dry surface.  
For more information on snow chains, contact a CITROËN dealer or a qualified workshop.  
Changing a bulb  
Halogen headlamps  
The headlamps are fitted with  
polycarbonate glass with a protective  
coating:  
Changing a bulb should only be done  
after the headlamp has been switched  
off for several minutes (risk of serious  
burns).  
F
do not clean them using a dry  
or abrasive cloth, nor with a  
detergent or solvent product,  
use a sponge and soapy water or a  
pH neutral product,  
F
Do not touch the bulb directly with  
your fingers, use a lint-free cloth.  
F
F
It is imperative to use only anti-  
ultraviolet (UV) type bulbs to avoid  
damaging the headlamp.  
Always replace a failed bulb with a  
new bulb with the same type and  
specification.  
when using a high pressure  
washer on persistent marks, do not  
keep the lance directed towards  
the lamps or their edges for too  
long, so as not to damage their  
protective coating and seals.  
1. Direction indicators (PY21W amber).  
2. Sidelamps (W5W).  
3. Main beam headlamps (H1-55W).  
4. Dipped beam headlamps (H7-55W).  
5. Front foglamps (PSX24W).  
6. LED lamps (LEDs).  
209  
Practical information  
Changing direction indicator  
bulbs  
Changing dipped beam headlamp  
bulbs  
F
Remove the protective cover by pulling the  
tab.  
Disconnect the bulb connector.  
Spread the springs to release the bulb.  
Pull the bulb out and change it.  
Rapid flashing of the direction indicator  
warning lamp (right or left) indicates the  
failure of a bulb on that side.  
Amber coloured bulbs, such as the  
direction indicators, must be replaced  
with bulbs of identical specifications  
and colour.  
F
F
F
To refit, carry out these operations in reverse  
order.  
F
F
Turn the bulb holder a quarter of a turn and  
extract it.  
Pull out the bulb and change it.  
When refitting, close the protective  
cover carefully to preserve the sealing  
of the headlamp.  
To refit, carry out these operations in reverse  
order.  
LEd* / Xenon front lamps  
1. Direction indicators (LEDs).  
2. Sidelamps (LEDs).  
Changing main beam headlamp bulbs  
Changing sidelamp bulbs  
3. Dipped beam headlamps (Xenon).  
4. Main beam headlamps (LEDs / Xenon).  
5. Daytime running lamps (LEDs).  
6. Front foglamps (PSX24W).  
F
Remove the protective cover by pulling the  
tab.  
Disconnect the bulb connector.  
Spread the springs to release the bulb.  
Remove the bulb and change it.  
F
F
F
Remove the protective cover by pulling the  
tab.  
Pull the bulb holder pressing on the tabs on  
both sides.  
F
F
F
Pull the bulb and change it.  
For replacements on of these types of lamps  
(LED / Xenon), contact a CITROËN dealer or a  
qualified workshop.  
To refit, carry out these operations in reverse  
order.  
To refit, carry out these operations in reverse  
order.  
* LED: light-emitting diode.  
211  
Practical information  
Changing integrated direction  
indicator side repeaters  
Changing the LEd lamps  
Changing front foglamp bulbs  
F
Access to the front foglamp is through the  
aperture below the bumper.  
For the replacement of this type of LED lamp,  
contact a CITROËN dealer or a qualified  
workshop.  
F
Insert a screwdriver towards the centre of  
the repeater between the repeater and the  
base of the door mirror.  
F
Disconnect the black bulb holder  
connector, by pressing on the tab at the  
top.  
F
Tilt the screwdriver to extract the repeater  
and remove it.  
F
F
Remove the bulb-holder by pressing on the  
2 clips (at the top and the bottom).  
Replace the module.  
F
F
Disconnect the repeater connector.  
Replace the module.  
To refit, carry out these operations in reverse order.  
To refit, carry out these operations in reverse  
order.  
Contact a CITROËN dealer or  
a qualified workshop to obtain a  
replacement side repeater module.  
To obtain a replacement module, contact your CITROËN dealer or a qualified workshop.  
If you experience any difficulty in replacing bulbs, contact your CITROËN dealer or a  
qualified workshop.  
Rear lamps  
1. Brake lamps / sidelamps (P21/5W).  
2. Sidelamps (P5W).  
3. Direction indicators (PY21W amber).  
4. Foglamp, offside (PR21W red)  
Reversing lamp, nearside (P21W).  
Changing bulbs  
F
F
Spread the four tabs and remove the bulb  
holder.  
Turn the bulb a quarter of a turn and  
change it.  
F
F
Open the boot.  
Remove the access flap from the  
corresponding side trim panel.  
Unscrew the butterfly nut securing the  
lamp unit.  
F
To refit, carry out these operations in reverse  
order.  
Take care to engage the lamp unit in its guides,  
while keeping it in line with the vehicle.  
F
F
Unclip the lamp unit connector.  
Extract the lamp unit carefully pulling in its  
middle towards the outside.  
Amber or red bulbs, such as those  
for the direction indicators and rear  
foglamp, must be replaced by bulbs of  
the same rating and colour.  
213  
Practical information  
3d rear lamps  
1. 3D LED sidelamps (LEDs).  
Access to the bulbs  
Changing direction indicator (4)  
and foglamp or reversing  
lamp (5) bulbs  
2. LED brake lamps / sidelamps (LEDs).  
3. LED lateral sidelamps (LEDs).  
4. Direction indicators (PY21W amber).  
5. Foglamp, offside (H21W red)  
Reversing lamp, nearside (H21W).  
F
F
Open the boot.  
Remove the access flap from the  
corresponding side trim panel.  
Unscrew the butterfly nut securing the  
lamp unit.  
F
Turn the bulb a quarter turn and change it.  
F
F
F
Unclip the lamp unit connector.  
Extract the lamp unit carefully pulling it in  
line towards the outside.  
Changing LEd sidelamps and  
brake lamps  
Amber or red bulbs, such as those  
for the direction indicators and rear  
foglamp, must be replaced by bulbs of  
the same rating and colour.  
To refit, carry out these operations in reverse  
order.  
Take care to engage the lamp unit in its guides,  
while keeping it in line with the vehicle.  
For the replacement of this type of LED lamp,  
contact a CITROËN dealer or a qualified  
workshop.