Get Ease of use and comfort -> Front seats Guide for Citroen Spacetourer Van First Generation (2019-2024)

Ease of use and comfort

Seat cushion height

Front seats

Correct driving position

Before moving the seat backwards,

ensure that there is nothing that might

prevent the full travel of the seat.

There is a risk of trapping or pinching

passengers if present in the rear seats

or jamming the seat if large objects are

placed on the floor behind the seat.

For safety reasons, seat adjustments

must only be made when the vehicle is

stationary.

3

Before taking to the road and to make the most of the

ergonomic layout of the instruments and controls,

carry out these adjustments in the following order:

Manual adjustments

F Pull the control upwards to raise or push

it downwards to lower, as many times as

necessary to obtain the position required.

Longitudinal

-

the height of the head restraint,

the seat backrest angle,

the seat cushion height,

the longitudinal position of the seat,

the height and reach of the steering wheel,

the rear view mirror and door mirrors.

Driver seat backrest angle

F Raise the control and slide the seat

forwards or backwards.

When your seat is at the correct distance, move

it forwards and backwards slightly without

using the control bar to ensure the seat is

properly locked.

F Turn the knob to adjust the backrest.

Once these adjustments have been made,

check that the instrument panel can be

viewed correctly from your driving position.

57

Ease of use and comfort

Passenger seat backrest angle

Table position for the front

passenger seat backrest

Electric adjustments

To avoid discharging the battery, carry out

these adjustments with the engine running.

Longitudinal (driver seat)

F Pull the control upwards or turn the knob to

adjust the backrest.

When the backrest is correctly inclined, release

the control.

Check that no object, either on or

underneath the seat, could hinder its

movement.

F Push the control forwards or backwards to

To prevent the backrest from suddenly

folding forwards and hitting you, hold the

backrest with your back or hand while you

move the control.

slide the seat.

F Place the head restraint in the low position,

raise the armrest and fold the tray on the

back of the seat.

F Pull the control fully up and tip the backrest

forwards.

Backrest angle

To return to the normal position, guide the

backrest backwards until it locks into place.

This position, together with that of the rear

seats, allows you to transport long objects

inside the vehicle.

In this position, the backrest can support

a maximum load of 30 kg.

F Tilt the control forwards or backwards to

adjust the angle of the seat backrest.

58

Ease of use and comfort

Two positions can be stored and recalled, using

the buttons on the side of the driver's seat.

Cushion height and angle

Additional adjustments

Head restraint height

Storing a position using buttons

M/1/2

F Switch on the ignition.

F Adjust your seat.

F Press button M, then press button 1 or

2 within four seconds.

An audible signal indicates that the position has

been stored.

Storing a new position overwrites the previous

position.

3

F To raise a head restraint, pull it upwards.

F To lower the head restraint, press the lug A

and push down on the head restraint at the

same time.

F Tilt the rear part of the control upwards or

downwards to obtain the required height.

F Tilt the front part of the control upwards or

downwards to obtain the desired angle.

The head restraint has a frame with notches

which prevents it from lowering; this is a safety

device in case of impact.

Recalling a stored position

F With the ignition on or the engine

running, press button 1 or 2 to recall the

corresponding position.

An audible signal indicates the completion of

the adjustment.

Storing driving positions

The adjustment is correct when the

upper edge of the head restraint is

level with the top of the head.

You can interrupt the current movement by

pressing button M, 1 or 2 or by using one of the

seat controls.

A stored position cannot be recalled while

driving.

Removing a head restraint

F To remove the head restraint, press the lug

A and pull the head restraint upwards.

F To put the head restraint back in place,

engage the head restraint stems in the

openings, keeping them in line with the seat

backrest and press the lug A at the same

time.

Recalling stored positions is deactivated

45 seconds after switching off the ignition.

System which registers the electrical settings

of the driver's seat.

59

Ease of use and comfort

Relax head restraints

Massage function

Electric leg rest

Activation/Deactivation

Passenger seat with manual adjustments

Depending on the version, you can fold the

sides for greater comfort.

F

Press this button.

Never drive with the head restraints

removed; they must be fitted and correctly

adjusted.

Its indicator lamp comes on and the

massage function is activated for

a period of 1 hour.

F Press the front or rear part of the control to

unfold or fold the leg rest.

The movement stops when your release the

control.

During this time, massage is performed in

6 cycles of 10 minutes (6 minutes of massage

followed by 4 minutes of break).

Electric lumbar adjustment

Electric passenger seat

After one hour the function is deactivated, the

indicator lamp goes off.

Deactivate the massage function by pressing

this button, its indicator lamp goes off.

This function provides a lumbar massage to the

occupants in front; it only operates when the

engine is running as well as in STOP mode of

the Stop & Start system.

Adjustment of intensity

F Press the control to obtain the desired

Press this button to choose one of

the two available levels of massage

intensity.

lumbar support.

60

Ease of use and comfort

F Push the control forwards or rearwards to

unfold or fold the leg rest.

The movement stops when your release the

control.

Do not use the function when the seat

is not occupied.

Reduce the intensity of the heating as

soon as possible.

When the seat and passenger

compartment have reached an

adequate temperature, you can stop

the function; reducing the consumption

of electrical current reduces fuel

consumption.

Prolonged use at the highest setting is

not recommended for those with sensitive

skin.

There is a risk of burns for people whose

perception of heat is impaired (illness,

taking medication, for example).

There is a risk of overheating the system if

material with insulating properties is used,

such as cushions or seat covers.

Do not use the function:

Prior to handling the leg rest, make sure

that nothing obstructs the movement.

3

-

if wearing damp clothing,

if child seats are fitted.

Heated seats

To avoid breaking the heating element in

the seat:

-

do not place heavy objects on the seat,

do not kneel or stand on the seat,

do not place sharp objects on the seat,

do not spill liquids onto the seat.

To avoid the risk of short-circuit:

-

do not use liquid products for cleaning

the seat,

never use the heating function when

the seat is damp.

F Use the adjustment wheel to switch on and

select the level of heating required:

0: Off.

1: Low.

2: Medium.

3: High.

With the engine running, the front seats can be

heated separately.

61

Ease of use and comfort -> Front seats for Your Citroen Spacetourer Van First Generation (2019-2024)

Related Topics

Ease of use and comfort

Popular Owner Manuals

Latest Owner Manuals