Advertisement

Advertisement

Axles, Suspension, Steering -> Axle Geometry (Xsara) for Your Citroen Xsara SUV Second Generation (1997-2006)

SAXO - All Types  
POWER-ASSISTED STEERING  
Tightening torques (m.daN)  
8 - Track rod lock nut M16  
1 - Airbag  
5
2 - Airbag fixing to steering wheel  
3 - Steering wheel fixing  
4 - Steering column fixing  
5 - Steering cardan joint fixing  
6 - Fixing to bulkhead  
0.8  
3
9 - Track rod articulation  
2.1  
2.4  
8
8
1.5  
0.7  
10 - Splined coupling fixing to steering rack  
11 - Steering ram to splined coupling  
12 - Steering ram to casing  
13 - Nut fixing the pinion to the bearing  
14 - Valve/casing fixing  
2.3  
2.3  
2.2  
3.5  
4.5  
7 - Pivot ball-joint nut  
8 - Track rod lock nut M14  
B3EP02TD  
B3EP02WD  
213  
Downloaded from www.Manualslib.com manuals search engine  
SAXO - All Types  
POWER STEERING (continued)  
Power steering system  
WARNING : Saxo all types except diesel without aircon  
1 - Power steering  
2 - Oil dispensing valve  
3 - Power-assisted steering ram  
4 - Low pressure pipe  
5 - High pressure pipe  
6 - Upper reservoir  
7 - Power steering electro-pump unit and built-in  
lower reservoir  
8 - Flexible mounting  
9 - Electro-pump unit bracket  
Tightening torques (m.daN)  
Pump support fixing  
Pump fixing to support  
2
2
High pressure pump  
Electro-pump connection  
Power steering valve connection  
2
2.5  
Low pressure pump  
Electro-pump connection  
Power steering valve connection  
2.5  
2.5  
NOTE : Fluid type TOTAL Fluide ATX capacity : 0.950 L.  
B3EP09UD  
214  
Downloaded from www.Manualslib.com manuals search engine  
POWER STEERING (continued)  
SAXO - All Types  
POWER STEERING SYSTEM  
WARNING : Saxo diesel with aircon  
Description.  
NOTE : The power steering system on vehicles without aircon is supplied  
by a mechanical pump driven by the accessories drive belt.  
(6) Power steering mechanism.  
(7) Upper reservoir.  
(8) Lower reservoir.  
(9) Radiator.  
(10) Power steering pump.  
(11) The grooves on the connector (6) indicate that the pump (5) is  
constant flow.  
Max. pressure : 80 Bars.  
Pulley diameter : 112 mm.  
Fluid quality : TOTAL Fluide ATX  
Capacity : 1.55 litres.  
B3EP12XD  
215  
Downloaded from www.Manualslib.com manuals search engine  
XSARA - All Types  
AXLE GEOMETRY  
Front and rear measuring points  
XSARA All Types  
Front height  
Rear height  
B3CP046D  
H1 = Dimension between the centre of the front suspension arm mounting and the ground.  
H2 = Dimension between the contact face of the rear mounting and the ground.  
R1 = Front wheel radius under load.  
R2 = Rear wheel radius under load.  
L1 = Distance between the centre of the wheel and the centre of the front suspension arm mounting.  
L2 = Distance between the centre of the wheel and the contact face of the rear mounting on the bodyshell.  
216  
Downloaded from www.Manualslib.com manuals search engine  
AXLE GEOMETRY  
XSARA - All Types  
Reference heights  
Tools  
[1] Gauge for measuring the radius of wheels with 4 bolts  
Front  
: 8006-T  
Setting the reference height.  
Rear  
Measure the dimension «R1».  
Calculate the dim. H1 = R1 - L1.  
Measure the dimension «R2».  
Calculate the dim. H2 = R2 + L2.  
Compress the suspension until the values (H1) and (H2) are obtained.  
NOTE : The difference in height between the two sides should be less than 10 mm.  
B3CP04AD  
Front axle  
Rear axle  
All engines  
(except 2.0i 16V  
and CRD)  
All saloons  
(except 2.0i 16V  
and CRD)  
2.0i 16V  
(RFS)  
All CRD  
engines  
2.0i 16V  
(RFS)  
All CRD  
engines  
Estate  
88  
Engines  
Reference heights  
(in mm)  
115.5  
75.5  
73  
103  
90.5  
83  
217  
Downloaded from www.Manualslib.com manuals search engine