AXLE GEOMETRY
(The reference height of the vehicle is set as per the table below).
Rear axle
XSARA PICASSO - All Types
Measurements at reference height (continued).
Front axle
B3CP05BC
B3CP05AC
B3DP079C
H1 = R1 – L1
ou
FRONT AXLE
H1’ = R1 – L1’
H2 = R2 + L2
Essieu rear
Vehicles all types
L1 = 90.5mm
H1 = R1 – L1
L1’ = 124 mm
H2 = R2 + 8.5 mm
H2 = R2 + L2
CRD vehicles (Difficult Road Conditions)
or
H1’ = R1 – L1’
6FZ - RHZ
L1
L2
L1’
75.5
23.5
109
Measure the radius of the front wheel : R1.
Calculate dimension H1 or H1’.
Measure the radius of the rear wheel: R2.
Calculate dimension H2.
Compress the suspension to obtain the calculated values. The difference in height between the two sides should be less than 10 mm.
238
English 
