Advertisement

Advertisement

Axles, Suspension, Steering -> Front Axle (Xsara) for Your Citroen Xsara SUV Second Generation (1997-2006)

XSARA - All Types  
AXLE GEOMETRY  
Values of the front and rear suspensions, at reference height  
ESSENTIAL : When checking the suspensions, the vehicle should be at reference height.  
Tools used :  
Compress the suspension, to obtain the values at reference height.  
[1] Set of two suspension compressors  
[2] Set of four straps  
[3] Set of four shackles  
: 9511-T.A  
: 9511-T.B  
: 9511T.C  
WARNING  
A < B = Positive figure:  
+ =  
– =  
TOE-IN  
TOE-OUT  
B3CP04LC  
A > B = Negative figure:  
218  
Downloaded from www.Manualslib.com manuals search engine  
XSARA  
AXLE GEOMETRY  
Values of the front and rear suspensions, at reference height  
Front axle  
All engines (except 2.0i 16V)  
2.0i 16V  
- 1.5 ± 1  
- 0°15' ±10'  
3° ± 40’  
All CRD engines  
Adjustable  
YES  
mm  
0°  
Tracking  
Castor  
NO  
King pin inclination  
Camber  
11° ± 1°  
0° ± 1°  
10° 40’ ± 1°  
10° 40’ ± 1°  
Rear axle  
All engines  
(except 2.0i 16V)  
All CRD engines  
Estate  
Adjustable  
NO  
2.0i 16V  
4.6 ± 1  
5.2 ± 1  
4.4 ± 1  
3.5 ± 1  
mm  
0°  
Tracking  
Camber  
0° 41’ ± 10’  
0° 47’ ± 10’  
0° 40’ ± 10’  
0° 32’ ± 10’  
- 1° 30’ ± 1°  
219  
Downloaded from www.Manualslib.com manuals search engine  
AXLE GEOMETRY  
XSARA - All Types  
a = Angle which defines the tracking between the front and rear axles.  
Its value must not exceed 12'  
B3CP04UC  
220  
Downloaded from www.Manualslib.com manuals search engine  
FRONT AXLE  
XSARA - All Types  
Tightening torques (m.daN).  
(1) Damper nut  
4.5 ± 0.4  
2.5 ± 0.3  
(2) Cup screw  
(3) Suspension leg  
(4) Anti-roll bar link rod upper ball-joint  
(5) Suspension leg pivot (hollow pivot)  
(5) Suspension leg pivot (pivot «H»)  
(6) Anti-roll bars  
3.7 ± 0.3  
4.5 ± 0.5  
5.5 ± 0.5  
(7) Anti-roll bar link rod lower ball-joint  
(8) Pivot lower ball-joint  
3.7 ± 0.3  
4 ± 0.4  
(9) Driveshaft nut  
32.5 ±2.5  
9 ± 1  
(10) Wheel bolt  
(11) Lower arm front mounting  
(12) Lower arm rear mounting and anti-roll bar bearing  
(13) Screw under rear mounting  
(14) Ball-joint fixing on lower arm  
Subframe to bodyshell fixing screw  
7.6 ± 0.7  
6.8 ± 0.6  
3.1 ± 0.3  
5± 0.5  
Vehicles 09/2000 # are all equipped  
8.5 ± 0.8  
as standard with ventilated discs.  
B3CP040P B3CP041D  
221  
Downloaded from www.Manualslib.com manuals search engine