AXLE GEOMETRY
SAXO - All Types
Geometry of the axles at reference height.
Front height
Rear height
H1 = R1 – L1
H2 = R2 + L2
H1 = Distance between the ground and
the mounting face of the fixings.
R1 = Distance between the centre of
the front wheel and the ground.
L1 = Distance between the centre of the
front wheel and the mounting face of
the fixings.
H2 = Distance between the ground
and the mounting face of the rear
crossmember.
R2 = Distance between the centre of
the rear wheel and the ground.
L2 = Distance between the centre of the
rear wheel and the rear crossmember.
The values L1 and L2 are given in the table below.
Normal suspension
C4CP0N2C
Raised suspension
Front axle Rear axle
C4CP0N3C
Front axle
Rear axle
L2
Dimension
Value (mm)
L1
L1
L2
71 ± 10 mm
53 ± 6 mm
36 ± 10 mm
82 ± 6 mm
Measure the dimension R1.
Measure the dimension R2.
Calculate the dimension H1 = R1 - L1.
Calculate the dimension H2 = R2 + L2
Compress the suspension until the calculated values «H1» and «H2» are obtained.
NOTE : The difference in height between the two sides at the rear should be less than 7.5 mm.
205
English 
