Advertisement

Advertisement

Clutch, Gearbox, Driveshafts -> MB3 Automatic Gearbox Controls for Your Citroen Xsara SUV Second Generation (1997-2006)

RECOMMENDATIONS – PRECAUTIONS (AUTOMATIC GEARBOX - MB3)  
SAXO  
Engine : KFW  
PRE-REPAIR PROCEDURE  
Oil quality  
If the gearbox has suffered a serious fault resulting in a malfunction or the destruction of a clutch, the  
oil will overheat and become contaminated with impurities : the oil is said to be "burnt".  
This is characterised by a black colour and the presence of an unpleasant smell.  
ESSENTIAL : The gearbox must be replaced.  
Oil level (prior conditions)  
- Oil hot (80°C min.).  
- Foot on the brake, change through all the gears.  
- Vehicle on a level surface.  
- Selection lever in position "P".  
- Engine running.  
The level should be between the min. markings "A" and "B" on the dipstick.  
ESSENTIAL : In no case should the oil level exceed the marking "B".  
Top up the automatic gearbox oil level (if necessary).  
B2CP16WC  
191  
Downloaded from www.Manualslib.com manuals search engine  
SAXO  
RECOMMENDATIONS – PRECAUTIONS (AUTOMATIC GEARBOX - MB3)  
Engine : KFW  
PRE-REPAIR PROCEDURE (continued)  
Negative pressure circuit.  
Absence of fault codes  
Measure the parameters.  
Anomalies present:  
- YES : Carry out the necessary repairs.  
- NO : Check (adjust the negative pressure capsule).  
- Check the negative pressure circuit.  
- Carry out the necessary repairs.  
Checks using the diagnostic tool.  
ESSENTIAL : Initialise the ECU  
Perform a road tes  
Preliminary checks :  
- The adjustment of the gear selection control.  
- The adjustment of the accelerator cable.  
Carry out the necessary operations  
Fault codes present  
Carry out the necessary repairs.  
Clear the fault codes.  
Reading the fault codes  
Read the fault codes.  
ESSENTIAL : Initialise the ECU  
Perform a road test.  
192  
Downloaded from www.Manualslib.com manuals search engine