Get Injection -> Fitting Bosch Injectors Guide for Citroen Xsara SUV Second Generation (1997-2006)

CHECKING AND SETTING THE BOSCH MECHANICAL INJECTION PUMP

SAXO - XSARA

Engine : VJX

ADJUSTING THE FAST IDLE SPEED.

- Bring the lever (3) into contact with the screw (2).

- Use the screw (2) to obtain the fast idle speed : 1100 ± 100 rpm.

Engine cold :

- Ensure that the lever (3) is up against the screw stop (2).

- If not, slightly tension the cable (4) using the cable clamp (1).

- Finish tensioning with the sheath tensioner (5).

Engine hot :

- Ensure that the cable (4) is slack.

- Check the operation of the thermostatic sensor on the coolant outlet housing : there should be a minimum

6 mm cable travel between a cold and a hot engine.

- If not, replace the thermostatic sensor. Tighten to 2.5 m.daN.

B1HP0HQC

B1HP0HUC

163

Downloaded from www.Manualslib.com manuals search engine

SAXO - XSARA

CHECKING AND SETTING THE BOSCH MECHANICAL INJECTION PUMP

Engine : VJX (continued)

ADJUSTING THE ACCELERATOR CONTROL.

- Fully depress the accelerator pedal.

- Check that the lever (10) is against the stop screw (6). If not, modify the

position of the spring clip (7).

- Check that, at idle, the lever (10) is against its stop (9).

Preliminary conditions :

- Engine hot (The cooling fan is engaged twice).

- Fast idle control released.

ADJUSTING THE IDLE SPEED.

- Slacken the screw (9) by a few turns until it no longer touches the lever (10).

- Adjust the idling speed using the screw (8).

B1HP0HSD

164

Downloaded from www.Manualslib.com manuals search engine

Injection -> Fitting Bosch Injectors for Your Citroen Xsara SUV Second Generation (1997-2006)