2002-2008 Cupra Born SUV Safety User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Safety for Your Cupra Born SUV First Generation (2002-2008)

Safety  
●
●
Make sure all luggage is secured  
Always reduce your speed as appropriate for  
Safety  
road, traꢀic and weather conditions.  
››› page 263.  
●
When travelling long distances, take breaks  
●
Make sure that no objects can interfere with  
the pedals.  
Safe driving  
Safety ꢀrst!  
WARNING  
regularly - at least every two hours.  
●
If possible, avoid driving when you are tired  
●
Adjust front seat, head restraint and mirrors  
or stressed.  
properly according to your size.  
●
Ensure that the passengers in the rear seats  
always have the head restraints in the in-use  
WARNING  
●
This manual contains important informa-  
position ››› page 109.  
Driving under the inꢁuence of alcohol, drugs,  
medication or narcotics may result in severe  
accidents and even loss of life.  
tion about the operation of the vehicle,  
both for the driver and the passengers. The  
other sections of the on-board documenta-  
tion also contain further information that  
you should be aware of for your own safety  
and for the safety of your passengers.  
●
Instruct passengers to adjust the head re-  
straints according to their height.  
●
Alcohol, drugs, medication and narcotics  
●
Protect children with appropriate child seats  
may signiꢀcantly alter perception, aꢂect re-  
action times and safety while driving, which  
could result in the loss of control of the vehi-  
cle.  
and properly applied seat belts ››› page 56.  
●
Assume the correct sitting position. Instruct  
●
Ensure that the on-board documentation  
your passengers also to assume a proper sit-  
is kept in the vehicle at all times. This is espe-  
cially important when lending or selling the  
vehicle to another person.  
ting position ››› page 39.  
●
Fasten your seat belt securely. Instruct your  
Safety equipment  
passengers also to fasten their seat belts prop-  
erly ››› page 41.  
Never put your safety or the safety of your pas-  
sengers in danger. In the event of an accident,  
the safety equipment may reduce the risk of  
injury. The following points cover part of the  
Before driving  
For your own safety and the safety of your  
passengers, always note the following points  
before every trip:  
Factors inꢁuencing safety  
safety equipment in your CUPRA1)  
:
As a driver, you are responsible for yourself and  
your passengers.  
●
Make sure that the vehicle's lights and turn  
●
●
Optimised seat belts for all seats.  
●
Always pay attention to traꢀic and do not get  
signals are working properly.  
Seat belt tensioners on the driver, front pas-  
distracted by passengers or telephone calls.  
●
●
Check tyre pressure.  
senger and rear side seats.  
●
Never drive when your driving ability is im-  
Ensure that all windows provide a clear and  
●
Seat belt force limiters on the driver, front  
paired (e.g. by medication, alcohol, drugs).  
good view of the surroundings.  
passenger and rear side seats.  
●
Observe traꢀic laws and speed limits.  
1)  
Depending on the version/market.  
38  
Correct sitting positionof vehicle occupants  
●
Red warning lamp and, if applicable, seat  
Correct sitting position of  
vehicle occupants  
belt status indication.  
●
Front airbags for driver and passenger.  
●
●
●
Side airbags for driver and passenger.  
Head airbags on both sides of the vehicle.  
Central airbag between the driver and front  
Correct position on the seat  
passenger.  
●
●
Yellow airbag control lamp  
Yellow warning lamp  
.
on  
on  
Fig. 32 Correct belt web and headrest  
positions  
the roof console.  
●
Yellow warning lamp  
the roof console.  
The correct sitting positions for the driver and  
passengers are shown below.  
●
Control units and sensors.  
1)  
●
●
●
●
Optimised and height-adjustable headrests  
Adjustable steering column.  
.
If your physical constitution prevents you from  
maintaining the correct sitting position, con-  
tact a specialised workshop for help with  
any special devices. The seat belt and airbag  
can only provide optimum protection if a cor-  
rect sitting position is adopted. CUPRA recom-  
mends taking your car in for technical service.  
Fig. 31 The correct distance between the  
driver and the steering wheel must be at  
least 25 cm (10 inches).  
ISOFIX/i-Size anchor points for child seats.  
Child seat top tether attachment points.  
The safety equipment mentioned above works  
together to provide you and your passengers  
with the best possible protection in the event  
of an accident. However, these safety systems  
can only be eꢀective if you and your passen-  
gers are sitting in a correct position and use  
this equipment properly.  
For your own safety and to reduce the risk of  
injury in the event of an accident or sudden  
braking or manoeuvre, CUPRA recommends  
the following positions:  
Safety is everybody's business.  
Valid for all vehicle occupants:  
●
Adjust the headrest so that its upper edge is  
at the same level as the top of your head, or as  
close as possible to the same level as the top of  
1)  
The front seats with built-in headrests do not require adjustment.  
39  
Safety  
●
your head and under no circumstances below  
eye level1). Keep the back of your neck as close  
as possible to the headrest ››› Fig. 32.  
Adjust the height of the seat so that you can  
WARNING  
reach the top of the steering wheel.  
Sitting in an incorrect position may increase  
the risk of severe or lethal injuries in the  
event of sudden braking or manoeuvring, in  
case of collision or accident and if the air-  
bags deploy.  
● Always keep both feet in the footwell so that  
you have the vehicle under control at all times.  
●
Short people must fully lower the headrest  
completely2), even if your head is below its up-  
per edge.  
For the passenger, the following applies:  
●
●
Move the seat backrest to an almost upright  
Before starting the car, all passengers must  
1)  
●
●
Tall people must fully raise the headrest  
.
be sitting in a correct position and stay like  
that for the entire journey. This also applies  
to a correct use of the seat belt.  
position so that your back rests completely  
against it.  
Always keep your feet in the footwell while  
the vehicle is in motion.  
●
Move the seat as far back as possible (mini-  
●
Adjust and fasten your seat belt correctly  
●
The maximum amount of people in the ve-  
mum 25 cm between the chest and the instru-  
ment panel check translation). If you are sitting  
closer than 25 cm, the airbag system cannot  
protect you properly.  
hicle is the same as the amount of seats with  
seat belts.  
››› page 41.  
●
The following also applies to the driver:  
For children, always use a protection sys-  
tem that is approved and suited for their  
●
Move the seat backrest to an almost upright  
position so that your back rests completely  
against it.  
weight and height ››› page 56.  
●
While driving, always keep your feet in the  
Number of seats  
footwell. Never place them over the seat or  
the dash panel, for example, or outside the  
window. Otherwise the airbag and seat belt  
may oꢂer insuꢂicient protection and also in-  
crease the risk of injury in the event of an  
accident.  
●
Adjust the steering wheel so that it is at a  
The vehicle has 5 seats, 2 in the front and 3 in  
the rear. All seats are equipped with a safety  
belt.  
distance of at least 25 cm (10 inches) from the  
sternum ››› Fig. 31 and can hold it with both  
hands on the sides, on the outside, with the  
arms slightly ꢁexed.  
In some versions, your vehicle is approved only  
for 4 seats. 2 front seats and 2 rear seats.  
●
The steering wheel must always point to-  
wards the chest and never towards the face.  
Check the oꢀicial documentation for the num-  
ber of occupants approved for your vehicle.  
Risks of sitting in an incorrect posi-  
tion  
●
Adjust the seat lengthwise so that you can  
fully step on the pedals with your knees slightly  
bent and there is a distance between the knee  
area and the instrument panel of at least 10 cm  
(4 inches) ››› Fig. 32.  
If seat belts are worn incorrectly or not at all,  
the risk of severe or lethal injuries increases.  
Seat belts can provide optimal protection only  
if the belt web is properly worn. Incorrect sit-  
1)  
On seats with adjustable headrests.  
40  
Seatbelts  
●
●
ting positions substantially reduce the protec-  
tive function of seat belts and, therefore, in-  
crease the risk of severe or even lethal injuries.  
The risk of severe or fatal injuries is especially  
heightened when a deploying airbag strikes a  
vehicle occupant who has assumed an incor-  
rect sitting position. The driver is responsible  
for all people, particularly children, inside the  
vehicle.  
Never travel without wearing the seat belt.  
Never travel in the luggage compartment.  
Seat belts  
Introduction  
WARNING  
Sitting in an incorrect position increases the  
risk of severe or fatal injuries in the event  
of accidents and sudden braking or manoeu-  
vres.  
●
All occupants must sit correctly during the  
The following list contains examples of incor-  
rect sitting positions that could be dangerous  
for all vehicle occupants.  
journey and wear the seat belt correctly.  
●
Occupants of the vehicle that are not sit-  
ting correctly, not wearing the seat belt or  
are not at a proper distance of the airbag risk  
suꢂering very serious or lethal injuries, espe-  
cially if the airbags deploy and strike them.  
When the vehicle is in motion:  
●
●
●
●
Never stand in the vehicle.  
Fig. 33 Drivers with properly worn seat  
belts will not be thrown forward in the event  
of sudden braking.  
Never stand on the seats.  
Never kneel on the seats.  
Never tilt your seat backrest too far to the  
Properly worn seat belts hold the occupants  
in the proper position. They also help prevent  
uncontrolled movements that may result in se-  
rious injury and reduce the risk of being thrown  
out of the vehicle in case of an accident.  
rear.  
●
●
●
●
●
●
●
●
Never lean against the instrument panel.  
Never lie on the rear seats.  
Never sit on the front edge of a seat.  
Never sit sideways.  
Vehicle occupants wearing their seat belts cor-  
rectly beneꢂt greatly from the ability of the  
belts to absorb kinetic energy. In addition, the  
front part of your vehicle and other passive  
safety features (such as the airbag system) are  
designed to absorb the kinetic energy released  
in a collision. Taken together, all these features  
reduce the releasing kinetic energy and conse-  
Never lean out of a window.  
Never put your feet out of a window.  
Never put your feet on the instrument panel.  
Never place your feet on the bench or on the  
backrest of the seat.  
●
●
Never travel in a footwell.  
Never sit on the armrests.  
41  
Safety  
quently, the risk of injury. This is why it is so  
important to fasten seat belts before every trip,  
even when "just driving around the corner".  
●
Seat belts which have been worn in an ac-  
WARNING  
cident and have been stretched must be re-  
placed by a specialised workshop. Renewal  
may be necessary even if there is no appa-  
rent damage. The belt anchorage should also  
be checked.  
●
If seat belts are worn incorrectly or not at  
all, the risk of severe injuries increases. The  
optimal protection from seat belts can be  
achieved only if you use them properly.  
Ensure that your passengers wear their seat  
belts as well. Accident statistics have shown  
that wearing seat belts is an eꢀective means of  
substantially reducing the risk of injury and im-  
proving the chances of survival when involved  
in a serious accident. Furthermore, properly  
worn seat belts improve the protection provi-  
ded by airbags in the event of an accident. For  
this reason, wearing a seat belt is required by  
law in most countries.  
●
Never allow two passengers (even children)  
to share the same seat belt.  
●
Do not attempt to repair a damaged seat  
belt yourself. The seat belts must not be re-  
moved or modiꢀed in any way.  
●
Never unbuckle a seat belt while the vehi-  
cle is in motion. Risk of fatal injury.  
●
The belts must be kept clean, otherwise  
●
The seat belt should never lie on hard or  
fragile objects (such as glasses or pens, etc.)  
because this can cause injuries.  
the retractors may not work properly.  
Seat belt buckled indication  
●
Do not allow the seat belt to be damaged or  
jammed, or to rub on any sharp edges.  
Although your vehicle is equipped with airbags,  
the seat belts must be fastened and worn. The  
front airbags, for example, are only triggered in  
some cases of head-on collision. The front air-  
bags will not be triggered during minor frontal  
or side collisions, rear-end collisions, overturns  
or accidents in which the airbag trigger thresh-  
old value in the control unit is not exceeded.  
It lights up red  
The driver or one of the passengers have  
not fastened their seat belts.  
●
Never wear the seat belt under the arm or  
in any other incorrect position.  
●
Bulky and unfastened clothing (such as an  
The control lamp lights up to remind the  
driver to fasten their seat belt.  
overcoat over a sweater) impairs the proper  
ꢀt and function of the seat belts, reducing  
their capacity to protect.  
Before starting the vehicle:  
●
The slot in the seat belt buckle must not be  
●
●
Fasten your seat belt securely.  
blocked with paper or other objects, as this  
can prevent the latch plate from engaging  
securely.  
Important safety instructions for the use of  
seat belts  
Instruct your passengers to fasten their seat  
belts properly before driving oꢀ.  
●
Always wear the seat belt as described in this  
●
Protect children by using a child seat ac-  
●
Never use seat belt clips, fastening rings or  
section.  
cording to the child's height and weight  
similar items to alter the position of the belt  
››› page 56.  
●
webbing.  
Ensure that the seat belts can be fastened at  
all times and are not damaged.  
●
Frayed or torn seat belts or damage to  
When starting to drive, if the vehicle's speed  
exceeds approx. 25 km/h (15 mph) and the  
seat belts are not fastened or are unfastened  
while driving, a warning sound will be heard for  
a few seconds. In addition, the warning lamp  
on the instrument cluster display ꢁashes.  
the connections, belt retractors or parts of  
the buckle could cause severe injuries in the  
event of an accident. Therefore, you must  
check the condition of all seat belts at regu-  
lar intervals.  
42  
Seatbelts  
The lamp goes out when the ignition is  
on and all occupants have fastened their seat  
belts.  
A red symbol indicates that the seat is oc-  
cupied and the occupant is not wearing  
the seat belt.  
If a rear seat occupant unfastens his/her seat  
belt while driving, the symbol lights up per-  
manently in red for that seat. In addition, the  
red warning light ꢁashes on the instrument  
cluster screen. If you drive faster than approx.  
25 km/h (15 mph), an audio signal sounds for a  
few seconds.  
Rear seat belts fastened display  
Fig. 36 Any rear seat occupants not  
wearing a seat belt may be thrown forward  
violently, hitting the driver who is wearing  
the seat belt.  
Head-on collisions and the laws of  
physics  
The eꢀects of the laws of physics in the case  
of a head-on collision are easy to explain: the  
moment a vehicle starts moving, a type of en-  
ergy called “kinetic energy” starts acting on  
both the vehicle and its passengers.  
Fig. 34 Instrument cluster: indication of  
the status of the rear seat seat belts.  
Depending on the version of the model, when  
the ignition is switched on, the status display  
The amount of “kinetic energy” depends on  
the speed of the vehicle and on the weight of  
the vehicle and of its passengers. The higher  
they are, the more energy there is to be “ab-  
sorbed” in the event of an accident.  
of the belts ››› Fig. 34 informs the driver on  
the instrument panel display whether the oc-  
cupants of the rear seats have their seat belts  
fastened.  
Fig. 35 A driver not wearing a seat belt  
The most signiꢂcant factor, however, is the  
speed of the vehicle. If the speed doubles from  
25 km/h (15 mph) to 50 km/h (30 mph), for  
example, the corresponding kinetic energy is  
multiplied by four.  
Depending on the seat occupancy and the sta-  
tus of the seat belts, the following symbols light  
up in diꢀerent colours:  
may be thrown forward violently.  
The white symbol indicates that the cor-  
responding seat is empty.  
A green symbol indicates that the seat is  
occupied and the occupant is wearing the  
seat belt.  
43  
Safety  
Given that the passengers of the vehicle in our  
example do not have their seat belts fastened,  
in the event of a collision the entire amount  
of the passengers' kinetic energy will be only  
absorbed by the mentioned impact.  
Fastening the seat belt  
Fastening and unfastening the seat  
belt  
Fasten your seat belt before each trip.  
●
Adjust the front seat and head restraint cor-  
rectly ››› page 39.  
●
Engage the seat backrest of the rear seat in  
Even at speeds of 30 km/h (19 mph) to 50  
km/h (30 mph), the forces acting on bodies in  
a collision can easily exceed one tonne (1000  
kg). At greater speed these forces are even  
higher.  
an upright position ›››  
.
●
Pull the latch plate and place the belt web-  
bing evenly across your chest and lap. Do not  
twist the seat belt when doing so ›››  
.
Vehicle occupants not wearing seat belts are  
not “attached” to the vehicle. In a head-on  
collision, they will move forward at the same  
speed their vehicle was travelling just before  
the impact. This example applies not only to  
head-on collisions, but to all accidents and  
collisions.  
●
Insert the buckle plate in the buckle of the  
correct seat ››› Fig. 37.  
●
Pull the belt to ensure that the latch plate is  
Fig. 37 Insert the latch plate of the seat  
belt into the buckle.  
securely engaged in the buckle.  
Releasing the seat belt  
Even at low speeds the forces acting on the  
body in a collision are so great that it is not  
possible to brace oneself with one's hands. In  
the event of a head-on collision, vehicle occu-  
pants not wearing a seat belt will be thrown  
uncontrollably forward and will collide, for ex-  
ample, against the steering wheel, instrument  
Only unfasten the seat belt when the vehicle  
has come to a standstill ›››  
Press the red button on the buckle  
.
●
››› Fig. 38. The latch plate is released from the  
buckle.  
●
Guide the belt back by hand so that it rolls up  
easily and the trim will not be damaged.  
panel or windscreen ››› Fig. 35.  
It is also important for rear passengers to wear  
seat belts properly, as they could otherwise be  
thrown forward violently through the vehicle  
interior in an accident. If a rear seat occupant  
is not wearing a seat belt, they are not only en-  
dangering themselves but also the occupants  
of the front seats ››› Fig. 36.  
Fig. 38 Release the seat belt's latch plate.  
Properly worn seat belts hold the vehicle occu-  
pants in the position that most protects them  
in the event of an accident or sudden braking  
›››  
.
44  
Seatbelts  
●
The lap part of the seat belt must lie across  
WARNING  
the pelvis, never across the stomach.  
●
The seat belt cannot oꢂer its full protec-  
●
The seat belt must lie ꢁat and ꢂt comfortably.  
tion unless the seat backrest is in an upright  
position and the seat belt is worn correctly,  
according to your size.  
Pull the belt tight if necessary to take up any  
slack.  
In the case of pregnant women, the seat belt  
should pass uniformly over the chest and as  
low as possible through the pelvic area with the  
strap ꢁat so it does not press down on the ab-  
domen; in addition, it must be used through-  
●
Unbuckling your seat belt while the vehicle  
is in motion can cause severe or fatal injuries  
in the event of an accident or sudden brak-  
ing.  
●
The seat belt itself, or a loose seat belt, can  
out the entire pregnancy ››› Fig. 40.  
cause severe injuries if the belt moves from  
hard areas of the body to soft areas (e.g. the  
stomach).  
Fig. 40 Position of seat belt during  
pregnancy.  
Adapting the position of the belt webbing to  
your size  
Seat belts oꢀer their maximum protection in  
the event of an accident and reduce the risk  
of sustaining severe or fatal injuries only when  
they are properly positioned. Furthermore, if  
the webbing is correctly positioned, the seat  
belt will hold the vehicle occupants in the op-  
timum position to ensure the airbag provides  
the maximum protection. The seat belt must  
therefore always be worn and the webbing cor-  
rectly positioned.  
The position of the seat belt can be adapted by  
adjusting the height of the front seats.  
Correct position of the seat belt  
WARNING  
An incorrectly worn seat belt web can cause  
severe or fatal injuries in the event of an acci-  
dent.  
●
The shoulder part of the seat belt must lie  
on the centre of the shoulder, never across  
the neck or the arm.  
Incorrectly worn seat belts can cause severe or  
even fatal injuries ››› page 39, Correct sitting  
position of vehicle occupants.  
●
The seat belt must lie ꢁat and ꢀt comforta-  
bly on the torso  
Fig. 39 Correct seat belt and headrest  
positions, viewed from front and the side.  
●
The lap part of the seat belt must lie across  
●
The shoulder part of the seat belt must lie  
the pelvis, never across the stomach. The  
seat belt must lie ꢁat and ꢀt comfortably on  
the pelvis Pull the belt tight if necessary to  
take up any slack.  
on the centre of the shoulder, never across the  
neck or the arm, under the arm or behind the  
shoulder.  
45  
Safety  
If the seat belt is slack, the tensioner tightens  
it. This cushions the movement of occupants  
forwards towards the impact.  
Automatic belt retractor  
●
In the case of pregnant women, the ab-  
dominal strap of the seat belt should pass  
as low as possible across the pelvic area,  
resting ꢁat and “surrounding” the abdomen  
The seat belt shoulder straps on the driver's  
and front passenger seats, as well as those on  
the rear side seats (and, depending on equip-  
ment, also the seat belt of the central rear  
seat) are ꢂtted with automatic retractors. This  
device ensures complete freedom of move-  
ment when the shoulder strap is pulled gently  
or during normal driving. However, during sud-  
den braking, when driving in the mountains,  
around bends and when accelerating, the re-  
tractor locks the seat belt if it extends rapidly.  
The belt pre-tensioners work in combination  
with the airbag system. In case of overturn, the  
pre-tensioners do not activate unless the head  
airbags are deployed.  
››› Fig. 40.  
●
Do not twist the seat belt while it is fas-  
tened.  
●
Once the seat belt is positioned correctly,  
When activated, a ꢂne powder may be re-  
leased. This is completely normal and it is not  
an indication of ꢂre in the vehicle.  
don't pull it away from your body with your  
hand.  
●
Do not lie the seat belt across rigid or frag-  
ile objects, e.g. glasses, pens or keys.  
Reversible belt tensioning (proactive occu-  
pant protection)  
●
Never use seat belt clips, retaining rings or  
In critical driving situations, e.g. in the event  
of emergency braking or in the case of over-  
steer and understeer, the proactive occupant  
protection can tension the front seat belts au-  
tomatically if they are worn1). The two belts are  
loosened again if an accident does not happen  
or when the critical situation passes. Proactive  
occupant protection is ready to operate again  
similar instruments to alter the position of  
the belt webbing.  
A reversible tensioning of the seat belts  
may occur in certain driving situations  
››› page 47. For example:  
Note  
●
●
●
in the event of sudden brakes  
If your physical constitution prevents you  
from maintaining the correct position of the  
belt webbing, contact a specialised workshop  
for help with any special devices to ensure  
the optimum protection of the seat belt and  
airbag. CUPRA recommends taking your car  
in for technical service.  
in the event of oversteering or understeering  
in the event of minor collisions  
››› page 47.  
Belt force limiter  
Seat belt tensioner  
Depending on the equipment and the country  
in question, in the event of an accident, the  
seat belt force limiter reduces the force the  
seat belt exerts on the body.  
The seat belts on the front seats and, depend-  
ing on the equipment, side rear seats are ꢂtted  
with tensioners.  
Automatic retractor, tensioner and  
belt force limiter  
The tensioners are activated by sensors in the  
event of severe head-on, side and rear colli-  
sions or the vehicle rolling over, and tension  
the seat belts in a direction opposite their ex-  
tension.  
Vehicle seat belts are part of the vehicle’s  
safety system ››› page 39. This system has the  
following important functions:  
1)  
Only if ꢀtted with the PreCrash System.  
46  
PreCrashsystem  
WARNING  
It only works completely if no special driving  
proꢂle is selected and if there are no operating  
anomalies.  
Note  
Improper handling and home repairs to seat  
belts, automatic retractors and belt tension-  
ers may increase the risk of serious or fa-  
tal injuries. The tensioners may not activate,  
even though they should, or they may acti-  
vate unexpectedly.  
●
After certain driving situations, the reversi-  
ble belt tensioners may be left permanently  
tensioned1). In this case, to loosen the belt, it  
must be removed manually while the vehicle  
is stationary and then replaced correctly.  
Basic features  
Depending on the legal provisions of the coun-  
try and the features of the vehicle, in critical  
situations (e.g. in certain cases of emergency  
braking or loss of control of the vehicle by the  
driver) the following functions can be activated  
separately or at the same time when the vehi-  
cle is travelling faster than approximately 30  
km/h (20 mph).  
●
The relevant safety requirements must be  
●
Never repair, adjust, or disassemble and re-  
observed if the vehicle or any components  
of the system are to be scrapped. Specialised  
workshops are aware of these requirements.  
assemble seat belt components or tension-  
ers. Always have this work carried out by a  
specialist workshop.  
●
Seat belts, tensioners and their automatic  
retractors cannot be repaired and have to be  
replaced.  
Maintenance and disposal of seat  
belt tensioners  
●
Reversible tensioning of front seat belts that  
are fastened.  
The belt tensioners are components of the  
seat belts that are installed in the seats of your  
vehicle. If you work on the belt tensioners or  
remove and install parts of the system when  
performing other repair work, the seat belt  
may be damaged. The consequence may be  
that, in the event of an accident, the belt ten-  
sioners function incorrectly or may not func-  
tion at all.  
●
●
Operation of the hazard warning lights.  
For the sake of the environment  
Automatic closing of the windows until they  
Airbag modules and belt tensioners may con-  
tain perchlorate.  
are just cracked open and, depending on the  
equipment, of the sunroof.  
Observe the legal requirements for their dis-  
posal.  
Depending on how critical the driving situation  
is, the belts are either tightened individually, or  
both belts at the same time.  
PreCrash system  
In addition to Front Assist  
So that the eꢀectiveness of the seat belt ten-  
sioner is not reduced and that removed parts  
do not cause any injuries or environmental  
pollution, regulations, which are known to the  
specialised workshops, must be observed.  
How it works  
In vehicles with Front Assist ››› page 170,  
within the limits of the system, information is  
assessed on the risk of collision with the ve-  
hicle in front. The functions of the PreCrash  
system may also be activated if there is a high  
likelihood of a rear-end collision, or during the  
activation of Front Assist.  
The PreCrash system is an assistance system  
that actives a series of measures to protect  
the occupants of the vehicles in potentially  
risky situations, but which cannot prevent a  
collision.  
1)  
Only if ꢀtted with the PreCrash System.  
47  
Safety  
nently on the instrument cluster screen. Go to  
a specialized CUPRA Service or Oꢀicial SEAT  
Service and ask for the system to be checked.  
Activation of the PreCrash system  
WARNING  
The PreCrash system can be partially deactiva-  
ted by deactivating the traction and/or stability  
control, depending on the equipment. When  
these vehicle safety controls are switched on  
(by default, every time the ignition is turned  
on), the system is fully activated.  
Distracting the driver in any way can lead to  
an accident and cause injuries.  
●
Never change settings on the Infotainment  
System while driving.  
WARNING  
The PreCrash system cannot overcome the  
limits imposed by the laws of physics; it only  
works within the limits of the system. Risks  
that compromise safety are never justiꢀed by  
the use of this system. The system is not a  
replacement for driver awareness and cannot  
prevent a collision.  
Airbag system  
Driving proꢀle selection settings  
In vehicles with driving proꢂle selection, Pre-  
Crash adapts to suit the special vehicle  
conꢂguration of the corresponding proꢂle  
››› page 149.  
Why is it so important to wear a  
seat belt and to sit correctly?  
●
Adapt your speed and safe distance to the  
For the inꢁating airbags to achieve the best  
protection, the seat belt must always be worn  
properly and the correct sitting position must  
be assumed.  
vehicle in front of you at all times to suit  
the visibility, weather, road and traꢂic condi-  
tions.  
Limited operation  
The PreCrash system is not available or only  
has limited availability in the following situa-  
tions:  
●
The system is not always able to recognise  
The airbag system is not a substitute for seat  
belts, but it is an integral part of the vehicle's  
overall passive safety system. Please bear in  
mind that the airbag system can only work ef-  
fectively when the vehicle occupants are wear-  
ing their seat belts correctly and have adjusted  
the head restraints properly. Therefore, it is  
most important to properly wear the seat belts  
at all times, not only because this is required by  
law in most countries, but also for your safety  
objects.  
●
The system may not react to people or ani-  
mals or objects that cross length-wise or that  
are hard to detect.  
●
●
●
When the TCS and/or ESC is oꢀ.  
When driving in reverse.  
●
Metallic objects (e.g. fences) or other ele-  
When the airbag control unit is not operating  
ments of the public road or adverse weather  
conditions can hinder its operation and thus  
its ability to detect collision risk.  
properly.  
●
When there is a fault in the system itself, in  
the ESC or in the Front Assist.  
●
Never ignore the warning lamps that light  
up or the messages shown on the dashboard.  
››› page 41, Seat belts.  
Troubleshooting  
The airbag inꢁates in a matter of seconds, so if  
you are not properly seated when the airbag is  
triggered, you may sustain fatal injuries. There-  
fore, it is essential that all vehicle occupants  
assume a correct sitting position while travel-  
ling.  
If the PreCrash is not working correctly, the  
message System unavailableor System  
with limited functionsis shown perma-  
48  
Airbagsystem  
WARNING  
●
bag  
Sharp braking before an accident may cause a  
passenger not wearing a seat belt to be thrown  
forward into the area of the deploying airbag.  
In this case, the inꢁating airbag may inꢁict criti-  
cal or fatal injuries on the occupant. This also  
applies to children.  
Key-operated switch for front passenger air-  
Wearing the seat belt incorrectly or assuming  
an incorrect sitting position can lead to criti-  
cal or fatal injuries  
●
Control lamp for disabled/enabled status of  
the front passenger airbag.  
The airbag system operation is monitored  
electronically. The airbag control lamp will illu-  
minate for a few seconds every time the igni-  
tion is switched on (self-diagnosis).  
●
All vehicle occupants, including children,  
who are not properly belted can sustain criti-  
cal or fatal injuries if the airbag is triggered.  
Children up to 12 years old should always  
travel on the rear seat. Never transport chil-  
dren in the vehicle if they are not restrained  
or the restraint system is not appropriate for  
their age, size or weight.  
Always maintain the greatest possible distance  
between yourself and the front airbag. This  
way, the front airbags can completely deploy  
when triggered, providing their maximum pro-  
tection.  
There is a fault in the system if the control  
lamp  
:
The most important factors for triggering the  
airbag are the type of accident, the angle of  
impact and the vehicle speed.  
●
does not light up when the ignition is  
●
To reduce the risk of injury from an inꢁat-  
ing airbag, always wear the seat belt properly  
switched on ››› page 50,  
●
turns oꢀ after 4 seconds after the ignition is  
switched on,  
››› page 41.  
Whether or not the airbags are activated de-  
pends primarily on the vehicle deceleration  
rate resulting from the collision and detected  
by the control unit. If the vehicle deceleration  
occurring during the collision and measured by  
the control unit remains below the speciꢂed  
reference values, the front, side and/or curtain  
airbags will not be triggered. Take into account  
that the visible damage in a vehicle involved in  
an accident, no matter how serious, is not a  
determining factor for the airbags to have been  
activated.  
●
turns oꢀ and then lights up again after the  
Description of the airbag system  
ignition is switched on,  
●
illuminates or ꢁashes while the vehicle is  
The airbag system oꢀers additional protection  
for the occupants in combination with the seat  
belts.  
moving.  
The airbag system is not triggered if:  
The airbag system comprises the following  
modules (as per vehicle equipment):  
●
●
●
●
●
the ignition is switched oꢀ  
there is a minor frontal collision  
there is a minor side collision  
there is a rear-end collision  
●
●
●
●
●
●
Electronic control unit  
Front airbags for driver and passenger  
Side airbags  
in the event of the vehicle overturning if the  
Central airbag for the driver  
Head airbag  
dynamic characteristics measured by the con-  
trol unit are too low,  
●
the impact speed is lower than the reference  
Airbag control lamp on the instrument  
panel ››› page 50  
value programmed in the control unit.  
49  
Safety  
as the properties of the object the vehicle hits  
(hard/soft), angle of impact, vehicle speed,  
etc.  
In an accident with airbag activation:  
WARNING  
●
the interior lights switch on (if the interior  
●
The seat belts and airbags can only provide  
maximum protection if the occupants are  
light switch is in the courtesy light position);  
Deceleration trajectory is key for airbag activa-  
tion.  
●
seated correctly ››› page 39.  
If a fault has occurred in the airbag sys-  
tem, have the system checked immediately  
by a specialised workshop. Otherwise there is  
a danger that during a collision, the system  
may fail to trigger, or not trigger correctly.  
the hazard warning lights switch on;  
●
●
●
●
all doors are unlocked;  
The control unit analyses the collision trajec-  
tory and activates the respective restraint sys-  
tem.  
the high voltage system is switched oꢀ;  
an emergency call is started.  
If the deceleration rate is below the predeꢂned  
reference value in the control unit the airbags  
will not be triggered, even though the accident  
may cause extensive damage to the car.  
Airbag system control lamps  
Airbag activation  
Lights up on the instrument cluster  
Fault in the airbag system and seat belt  
tensioners. Have the system checked im-  
mediately by a specialised workshop.  
The airbags deploy extremely rapidly, within  
thousands of a second, to provide additional  
protection in the event of an accident. A ꢂne  
dust may develop when the airbag deploys.  
This is normal and it is not an indication of ꢂre  
in the vehicle.  
The following airbags are triggered in serious  
head-on collisions:  
●
●
●
Driver airbag.  
Lights up on the instrument cluster  
Airbag or belt tensioner system deacti-  
vated by a diagnostic tester. Contact a  
specialised workshop and get it to check  
whether the airbag or belt tensioner sys-  
tem should remain deactivated.  
Front passenger front airbag  
Head airbags.  
The airbag system is only ready to function  
when the ignition is on.  
In the event of serious side collisions, some  
(or all) of the following airbags can be acti-  
vated (depending on the severity of the col-  
lision):  
In special accidents instances, several airbags  
may activate at the same time.  
Lights up on the roof console  
Front passenger front airbag deactivated.  
Check if the airbag should be kept deacti-  
vated.  
Airbags do not activate in the event of minor  
head-on and side collisions or rear-end colli-  
sions.  
●
Curtain (head) airbag on the side of the acci-  
dent.  
Lights up on the roof console  
Front passenger front airbag activated.  
The control lamp turns oꢀ automatically  
60 seconds after the ignition is switched  
on.  
●
●
Activation factors  
Front side airbag on the side of the accident.  
Central airbag.  
The conditions that lead to the airbag system  
activating in each situation cannot be general-  
ised. Some factors play an important role, such  
50  
Airbagsystem  
Several warning and control lamps light up for a  
few seconds when the ignition is switched on,  
signalling that the function is being veriꢂed.  
They will switch oꢀ after a few seconds.  
●
Do not mount a child seat in the front pas-  
senger seat or remove the mounted child  
seat! The front passenger front airbag may  
deploy during an accident in spite of the  
fault.  
If the airbag and seat belt tensioner system  
control lamp remains on or ꢁashes, it indi-  
cates a malfunction in the airbag and seat belt  
NOTICE  
tensioner system ›››  
. Have the system  
checked immediately by a specialised work-  
shop.  
Always pay attention to any lit control lamps  
and to the corresponding descriptions and  
instructions to avoid damage to the vehicle  
or harm to the occupants.  
Fig. 42 Front passenger airbag located in  
If the front passenger airbag has been deacti-  
dash panel.  
vated, the warning lamp  
remains lit on  
the roof console to remind you that the airbag  
is deactivated. If, with the front passenger air-  
bag deactivated, this lamp does not remain  
lit or if it is lit along with the control lamp  
on the instrument panel, there is a fault in the  
airbag system ››› . If the control lamp is  
ꢁashing, there is a fault in the disabling of the  
airbag system ››› . Have the system checked  
immediately by a specialised workshop.  
Front airbags  
The driver's front airbag is housed in the steer-  
ing wheel and that of the front passenger, on  
the dash panel. Airbags are identiꢂed by the  
word “AIRBAG”.  
The airbag covers open and remain attached  
to the steering wheel and instrument panel  
when the driver and front passenger air-  
bags are triggered, respectively ››› Fig. 41 ,  
››› Fig. 42.  
WARNING  
In conjunction with the seat belts, the front  
airbag system gives the front occupants addi-  
tional protection for the head and chest in the  
In the event of a fault in the airbag and seat  
belt tensioner system, the airbags and seat  
belts may not trigger correctly, may fail to  
trigger or may even trigger unexpectedly.  
Fig. 41 Driver’s airbag in the steering  
wheel.  
event of a severe frontal collision ›››  
.
In addition, in certain head-on collisions, the  
head airbag is triggered on both sides of the  
vehicle.  
●
The vehicle occupants run the risk of sus-  
taining severe or fatal injuries. Have the sys-  
tem checked immediately by a specialised  
workshop.  
Their special design allows the controlled es-  
cape of the propellant gas when an occupant  
puts pressure on the bag. Thus, the head and  
51  
Safety  
chest are protected by the airbag. After the  
collision, the airbag deꢁates suꢀiciently to al-  
low visibility.  
Deactivate the front passenger front airbag  
only if you have to use a rear-facing child seat  
in the front passenger seat.  
Activate and deactivate front pas-  
senger front airbag1)  
CUPRA recommends ꢂtting the child seat in  
the rear seat to avoid having to deactivate the  
front passenger airbag.  
WARNING  
●
The deployment space between the front  
passengers and the airbags must not in any  
case be occupied by other passenger, pets  
and objects.  
When the front passenger airbag is deactiva-  
ted, this means that only the front passenger  
front airbag is deactivated. All the other airbags  
in the vehicle remain activated.  
●
The airbags provide protection for just one  
accident; replace them once they have de-  
ployed.  
Deactivate and activate the front passenger  
front airbag  
●
It is also important not to attach any  
objects such as cup holders or telephone  
mountings to the surfaces covering the air-  
bag units.  
Fig. 43 Switch for activating and  
deactivating the front passenger airbag.  
●
●
●
●
Connect the drive system.  
Open the passenger side door.  
Remove the key shaft from the vehicle key.  
Insert the key blade into the slot provided  
in the front passenger airbag disconnection  
switch ››› Fig. 43. About 3/4 of the key should  
enter; this is as far as it will go.  
●
Turn the key gently to change its position to  
(deactivate) or to (activate). If you have  
diꢀiculty, ensure that you have inserted the key  
as far as it will go.  
●
●
Close the front passenger door.  
Fig. 44 On the roof console: passenger  
airbag deactivation control lamp.  
When deactivating the airbag, switch the ig-  
nition on and check that the control lamp  
remains lit ››› Fig. 44.  
1)  
Not available on all markets.  
52  
Airbagsystem  
Central airbag  
●
When reactivating the airbag, check that  
When triggered, the central airbag ꢂlls the  
marked zone (deployment zone) ››› Fig. 46.  
For this reason, never place or ꢂx objects in  
when the ignition is switched on, the  
control lamp does not light up and the  
lamp lights up for 60 seconds and then turns  
oꢀ.  
this zone ›››  
.
The central airbag triggers in the case of a side  
collision or if the vehicle overturns, reducing  
the risk of vehicle occupants suꢀering injuries.  
WARNING  
●
The driver of the vehicle is responsible for  
disabling or switching on the airbag.  
WARNING  
●
Always switch oꢂ the ignition before disa-  
When triggered, the airbag inꢁates at high  
speed in milliseconds.  
bling the front passenger airbag! Failure to do  
so could result in a fault in the airbag deacti-  
vation system.  
Fig. 45 In the inner padding of the driver's  
seat backrest: central airbag.  
●
Always keep the central airbag deployment  
zone clear.  
●
Never leave the key in the airbag disabling  
●
Never attach objects to the central airbag  
switch as it could get damaged or enable or  
disable the airbag during driving.  
cover or the deployment zone.  
●
Do not allow other people, animals or ob-  
●
If for any reason an airbag is deactivated,  
jects to get between the occupants of the  
front seats and the airbag deployment zone.  
Make sure that all vehicle occupants, includ-  
ing children, follow this rule.  
reactivate it as soon as possible so that it can  
fulꢀl its protective function.  
●
Never use upholstery or seat covers that  
have not been explicitly authorised for the  
seats of the vehicle. Otherwise, the side air-  
bag will not be able to deploy if triggered.  
Fig. 46 Fully inꢁated central airbag  
(deployment zone).  
The central airbag is installed for the front  
seats and is located in the inner padding of the  
driver's seat backrest.  
The location of the central airbag is indicated  
by the inscription “AIRBAG” ››› Fig. 45.  
53  
Safety  
WARNING  
WARNING  
●
Improper manipulation of the driver and  
front passenger seats can prevent the central  
airbag from operating correctly and cause  
serious injuries.  
If you do not wear a seat belt, if you lean  
forward, or are not seated correctly while the  
vehicle is in motion, you are at a greater risk  
of injury if the side airbag system is triggered  
in an accident.  
●
Never remove the front seats from the ve-  
●
In order for the side airbags to provide their  
hicle or modify their components.  
maximum protection, the prescribed sitting  
position must always be maintained with seat  
belts fastened while travelling.  
●
If the backrest side bolsters are subjected  
to a lot of force, the central airbag may not  
trigger correctly,it may not trigger at all or if  
may trigger unexpectedly.  
Fig. 48 Illustration of completely inꢁated  
side airbag on left side of vehicle.  
●
In a side-on collision the side airbags will  
not work if the sensors do not correctly  
measure the pressure increase on the inte-  
rior of the doors, due to air escaping through  
the areas with holes or openings in the door  
panel.  
●
Have a specialised repair shop immediately  
repair any damage to the original seat up-  
holstery or seams in the area of the central  
airbag module.  
The side airbags are located in the front seat  
backrests ››› Fig. 47 , ››› Fig. 48.  
●
Never drive if the interior door panels have  
Its location is marked with the word “AIRBAG”  
on the upper part of the back of the seats or  
on the lower coverings with the word AIRBAG  
in relief.  
been removed or if the panels have not been  
correctly ꢀtted.  
Side airbags  
●
Occupants of the outer seats must never  
carry any objects or pets in the deployment  
space between them and the airbags, or al-  
low children or other passengers to travel in  
this position. It is also important not to attach  
any accessories (such as cup holders) to the  
doors. This would impair the protection of-  
fered by the side airbags.  
In conjunction with the seat belts, the side air-  
bag system provides additional protection for  
the upper body in the event of a severe side  
collision ›››  
.
In a side collision, the side airbags reduce the  
risk of injury to passengers to the areas of the  
body facing the impact. In addition to their  
normal protection, the seat belts also hold the  
passengers in the event of a side collision; this  
is how these airbags provide maximum protec-  
tion.  
●
The built-in coat hooks should be used  
only for lightweight clothing. Do not leave  
any heavy or sharp-edged objects in the  
pockets.  
Fig. 47 Driver's seat and passenger seat  
side airbags.  
54  
Airbagsystem  
The head-protection airbags reduce the risk of  
injury to passengers in the front and rear side  
seats facing the impact.  
Head-protection airbags  
●
Great forces, such as hard blows or kicks,  
must not be exerted upon the backrest bol-  
ster because the system may be damaged.  
In this case, the side airbags would not be  
triggered.  
WARNING  
●
Under no circumstances should protective  
●
In order for the head-protection airbags to  
covers be ꢀtted over seats with side airbags  
unless the covers have been approved for use  
in your vehicle. Because the airbag deploys  
from the side of the backrest, the use of con-  
ventional seat covers would obstruct the side  
airbag, seriously reducing the airbag's eꢂec-  
tiveness.  
provide their maximum protection, the pre-  
scribed sitting position must always be main-  
tained with seat belts fastened while travel-  
ling.  
●
For safety reasons, the curtain airbag must  
be disabled in those vehicles ꢀtted with a  
screen dividing the interior of the vehicle.  
See your technical service to make this ad-  
justment.  
Fig. 49 Location of head-protection  
airbags.  
●
Any damage to the original seat upholstery  
or around the seams of the side airbag units  
must be repaired immediately by a special-  
ised workshop.  
Head-protection airbags are on both sides of  
the passenger compartment, above the doors  
●
There must be no other persons, animals  
or objects between the occupants of the  
outer seats and the deployment space of the  
head-protection airbags so that the head-  
protection airbag can deploy completely  
without restriction and provide the greatest  
possible protection. Therefore, sun blinds  
which have not been expressly approved for  
use in your vehicle may not be attached to  
the side windows.  
●
The airbags provide protection for just one  
››› Fig. 49 and their location is indicated with  
accident; replace them once they have de-  
ployed.  
the word “AIRBAG”.  
●
Any work on the side airbag system or re-  
In combination with the seat belts, the Side  
Curtain Protection® airbags provide additional  
protection for the upper part of the body of  
vehicle occupants in the event of serious side  
moval and installation of the airbag compo-  
nents for other repairs (such as removal of  
the front seat) should only be performed by a  
specialised workshop. Otherwise, faults may  
occur during the airbag system operation.  
collisions or the vehicle overturning ›››  
.
●
The built-in coat hooks should be used  
only for lightweight clothing. Do not leave  
any heavy or sharp-edged objects in the  
pockets. Please, do not hang the clothes on  
coat hangers.  
The framed area is covered by the head-pro-  
tection airbag when it is deployed (deployment  
area) ››› Fig. 49. Therefore, objects should  
never be placed or mounted in this area ›››  
.
●
The airbags provide protection for just one  
accident; replace them once they have de-  
ployed.  
In the event of a vehicle rollover, a side impact  
or certain head-on collisions, the head airbags  
on both sides are triggered.  
55  
Safety  
The laws of physics involved and the forces  
acting in a collision apply also to children  
››› page 43. But unlike adults, children do not  
have fully developed muscle and bone struc-  
tures. This means that children are subject to a  
greater risk of injury.  
child seat. Adjust only the “SICT” closest to the  
door. Please follow the child seat manufactur-  
er's usage instructions).  
●
Any work on the head-protection airbag  
system or removal and installation of the air-  
bag components for other repairs (such as  
removal of the roof lining) should only be  
performed by a specialised workshop. Other-  
wise, faults may occur during the airbag sys-  
tem operation.  
●
Child seats directed towards the front of the  
vehicle (group 3): safety belt (TAKATA MAXI).  
Follow the manufacturer's instructions and ob-  
serve any statutory requirements when instal-  
ling and using child seats. Always read and note  
››› page 57.  
We recommend you always carry the manufac-  
turer's Child Seat Instruction Manual together  
with the on-board documentation.  
To reduce the risk of injuries, children must  
always use special child restraint systems when  
travelling in the vehicle.  
●
The side and head airbags are managed  
through sensors located in the interior of the  
front doors. To ensure the correct operation  
of the side and curtain airbags neither the  
doors nor the door panels should be modi-  
ꢀed in any way (e.g. ꢀtting loudspeakers). If  
the front door is damaged, the airbag system  
may not work correctly. All work carried out  
on the front door must be done in a special-  
ised workshop.  
We recommend the use of child safety  
products from the Original Accessories Pro-  
gramme, which includes systems for all ages  
made by “Peke” (not for all countries) (see  
www.seat.com).  
These systems have been especially designed  
and approved, complying with the ECE-R44.  
regulation.  
Child seats group classiꢀcation  
CUPRA recommends securing the child seats  
shown on the website as described below:  
Transporting children  
safely  
●
Child seats in the opposite direction of travel  
(group 0+): ISOFIX and support peg (ROMER  
BABY SAFE PLUS SHR II + ISOFIX BASE / PEKE  
G0 I-SIZE + I-SIZE BASE).  
Introduction  
For safety reasons, as we have learned from  
accident statistics, we recommend that chil-  
dren under 12 years of age travel in the rear  
seats. Depending on their age, height and  
weight, children travelling in rear seats must  
use a child seat or a seat belt. For safety rea-  
sons, the child seat should be installed in the  
rear seat, behind the front passenger seat or in  
the centre back seat.  
●
Child seats in the direction of travel (group  
1): ISOFIX and Top Tether (ROMER DUO PLUS +  
TOP TETHER / PEKE G1 TRIFIX I-SIZE).  
Fig. 50 Examples of child seats.  
●
Forward-facing child seats (group 2): seat  
Use only child seats that are oꢀicially approved  
and suitable for the child.  
belt and ISOFIX (ROMER BRITAX KIDFIX2 S.  
In addition, it is necessary to use the child  
seat attachment point for the waist strap “Se-  
cureGuard” and adjust the side impact protec-  
tion system “SICT”located at the rear of the  
These seats are subject to the ECE-R44 or  
ECE-R129 standards. ECE-R stands for: Eco-  
nomic Commission for Europe Regulation.  
56  
Transportingchildren safely  
Child seats by approval category  
Child seats by weight group  
Fitting and using child seats  
The child seats are grouped into 5 categories:  
Child seats may have the approval category of  
universal, semi-universal, vehicle speciꢂc (all  
according to the ECE-R44 standard) or i-Size  
(according to the ECE-R129 standard).  
Age group  
Group 0  
Group 0+  
Group 1  
Weight of the child  
Up to 10 kg  
●
Universal: child seats with universal approval  
can be installed in all vehicles. There is no need  
to consult any list of models. In the case of  
universal approval for ISOFIX, the child seat is  
additionally provided with a Top Tether belt.  
Up to 13 kg  
From 9 to 18 kg  
From 15 to 25 kg  
From 22 to 36 kg  
Group 2  
Group 3  
Fig. 51 Airbag sticker: on the passenger  
side sunshade blind.  
●
Semi-universal: semi-universal approval, in  
addition to the standard requirements of uni-  
versal approval, requires safety devices to lock  
the child seat, which require additional test-  
ing. Child seats with semi-universal approval  
include a list of vehicle models for which they  
can be installed.  
Warnings about ꢀtting a child seat  
Child seats that have been tested and ap-  
proved under the ECE R44 or ECE-R129 stand-  
ards bear the ECE-R44 or ECE-R129 test marks  
on the seat (the letter E in a circle with the test  
number below it).  
Take the following general warnings into ac-  
count if you are going to ꢂt a child seat. They  
are valid for all child seats regardless of their  
attachment system.  
●
Vehicle-speciꢀc: vehicle-speciꢂc approval  
requires a dynamic test of the child seat for  
each vehicle model separately. Child seats with  
vehicle-speciꢂc approval also include a list of  
vehicle models for which they can be installed.  
Follow the manufacturer's instructions and ob-  
serve any statutory requirements when instal-  
ling and using child seats.  
●
Please read and follow the child seat manu-  
facturer's operating instructions.  
●
The child seat should preferably be ꢂtted to  
We recommend you to always include the  
manufacturer's Child Seat Instruction Manual  
together with the on-board documentation.  
the rear seat behind the front passenger seat  
so that the child can exit the vehicle on the  
pavement side.  
●
i-Size: child seats with i-Size approval must  
meet the requirements prescribed in the ECE-  
R 129 standard in relation to installation and  
safety. Child seat manufacturers can tell you  
which seats have i-Size approval for this vehi-  
cle.  
CUPRA recommends you use child seats from  
the Original Accessories Catalogue. These  
child seats have been designed and tested for  
use in our vehicles. You can ꢂnd the right child  
seat for your model and age group at our deal-  
ers.  
●
Set the height of the seat belt such that  
it adapts to the child seat naturally, without  
twisting. The lowest position of the seat belt  
height regulator must be used with rear-facing  
child seats.  
●
To correctly use a child seat in the back, the  
front backrest must be adjusted so that there  
is no contact with the child seat in the back in  
57  
Safety  
●
the case that it goes opposite to the direction  
of the car. In the case of front facing restraint  
systems, the front backrest must be adjusted  
so that there is no contact with the child's feet.  
Safety distance with respect to the passenger  
●
Never install a child seat facing backwards  
airbag ››› page 48.  
●
on the front passenger seat unless the  
front passenger front airbag has been dis-  
abled. Risk of potentially fatal injuries to  
the child! However, if necessary, the front  
passenger front airbag must be deactivated  
Objects between the passenger and the pas-  
senger side airbag ›››  
in Front airbags on  
●
For a correct assembly of the child's seat on  
page 52.  
the rear seats, adjust or dismount the head-  
rest, in order to prevent contact with the seat.  
The passenger side front airbag, when ena-  
bled, is a serious risk for a child that is facing  
backward since the airbag can strike the seat  
with such force that it can cause serious or  
fatal injuries. Children up to 12 years old should  
always travel on the rear seat.  
››› page 52 . If the passenger seat has  
a height adjustment option, move it to the  
highest, most upright position. If you have a  
ꢀxed seat, do not install any child restraint  
system in this location.  
●
If a semi-universal type chair is to be instal-  
led, in which the method of attachment to  
the car is through the seat belt and support  
bracket, it should never be installed in the cen-  
tral rear seat as the ground clearance is lower  
than in other places and the support bracket  
will not allow the seat to remain suꢀiciently sta-  
ble.  
●
For those vehicles that do not include a key  
lock switch to deactivate the airbag, the vehi-  
cle must be taken to a technical service. Do  
not forget to reconnect the airbag when an  
adult wants to sit in the front passenger seat.  
Therefore we strongly recommend you to  
transport children on the rear seats. This is the  
safest location in the vehicle. Alternatively, the  
front passenger airbag can be disabled with a  
key-operated switch ››› page 52. When trans-  
porting children, use a child seat suitable for  
the age and size of each child ››› page 56.  
●
When ꢂtting a child seat on the front passen-  
●
Never allow a child to be transported in a  
ger seat, the seat must be moved backwards as  
far as possible and placed in the highest posi-  
tion. The backrest must also be put in a vertical  
vehicle without being properly secured, or  
to stand up or kneel on a seat while travel-  
ling. In an accident, the child could be ꢁung  
through the vehicle, causing possibly fatal in-  
juries to themselves and to the other vehicle  
occupants.  
position1)  
.
WARNING  
Important information about the front pas-  
senger front airbag  
●
If a child seat is secured to the front pas-  
●
Never leave a child alone in the child seat  
senger seat, the risk to the child of sustaining  
critical or fatal injuries in the event of an ac-  
cident increases.  
or in the vehicle.  
A sticker with important information about the  
passenger airbag is located on the passenger's  
sunshade blind and/or on the passenger side  
door frame ››› Fig. 51.  
Read and always observe the safety informa-  
tion included in the following chapters:  
●
Children who are less than 1.50 m tall must  
not wear a normal seat belt without a child  
seat, as this could cause injuries to the ab-  
dominal and neck areas during a sudden  
braking manoeuvre or in an accident.  
●
An inꢁating front passenger airbag can  
strike the rear-facing child seat and project  
it with great force against the door, the roof  
or the backrest.  
●
When a child seat is mounted in the rear  
seats, the door child-proof lock should be  
activated ››› page 100.  
1)  
Compliance with current national legislation and the manufacturer's instructions is required when using or installing child seats.  
58  
Transportingchildren safely  
the luggage compartment side ››› page 62.  
The rings for retaining the Top Tether belt are  
marked with an anchor symbol.  
Attachment systems  
ted with objects. In addition, make sure that  
the base of the child seat is always supported  
by the surface of the vehicle's seat. The sup-  
port leg of the child seat should not raise the  
base of the child seat oꢂ the surface of the  
vehicle's seat.  
Depending on the country, diꢀerent attach-  
ment systems are used for safely installing child  
seats.  
●
Support bracket: some child seats rest on  
the ꢁoor of the vehicle with a support bracket.  
The support bracket prevents the child seat  
from tipping forward in the event of impact.  
Child seats ꢂtted with a support bracket should  
only be used in the passenger seat and side  
Attachment systems overview  
●
ISOFIX: ISOFIX is a standardised attachment  
Securing the child seat with the  
ISOFIX or i-Size system  
system allowing quick and safe attachment of  
child seats in the vehicle. ISOFIX attachment  
establishes a rigid connection between the  
child seat and the car body.  
rear seats ››› . For the assembly of this type  
of seat you should also consult the list of ap-  
proved vehicles for this assembly, available in  
the instructions for child restraint systems.  
The marking of ISOFIX or i-Size anchor points  
depends on the equipment and the country in  
question.  
The child seat has two rigid attachment clips,  
called connectors. These connectors are ꢂt-  
ted into the ISOFIX attachment rings found  
between the seat cushion and the backrest  
of the vehicle's back seat (on the sides). ISO-  
FIX attachment systems are used mainly in Eu-  
See the following tables to understand the  
compatibility of the ISOFIX/i-Size systems in  
the vehicle:  
Recommended systems for attaching child  
seats  
CUPRA recommends attaching child seats as  
follows:  
rope ››› page 59. If necessary, ISOFIX at-  
tachment may have to be supplemented with a  
Top Tether belt or a support bracket.  
●
Baby carriers or child seats in the oppo-  
site direction of travel: ISOFIX and support  
bracket or i-Size.  
●
Automatic three-point seat belt. Whenever  
●
Child seats in the direction of travel: ISOFIX  
possible, it is preferable to attach the child  
seats with the ISOFIX system rather than at-  
taching them with an automatic three-point  
and Top Tether.  
seat belt ››› page 63.  
WARNING  
Additional attachment:  
Incorrect use of the support bracket can  
cause serious or fatal injury.  
●
Top Tether: the Top Tether belt is guided  
over the back of the rear seat and attached to  
an anchor point with a hook. Anchor points are  
located at the back of the rear seat backrest on  
●
Make sure the support bracket is correctly  
and safely installed.  
●
When the base of the child seat is sup-  
porting the child’s weight, the support foot  
should not hang in the air or be supplemen-  
59  
Safety  
Vehicle ISOFIX positions  
Weight group  
Front passenger seat  
Electrical  
equipment  
Size classa)  
Rear side seat  
Rear central seat  
airbag enabled  
airbag disabled  
F
ISO/L1  
ISO/L2  
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Baby carrier  
G
X
IL  
X
IL  
Group 0 to 10 kg  
E
ISO/R1  
E
ISO/R1  
IL  
IL  
Group 0+ to 13 kg  
Group I 9 to 18 kg  
D
C
ISO/R2  
IL  
IL  
SO/R3  
IL  
IL  
D
ISO/R2  
IL  
IL  
C
ISO/R3  
IL  
IL  
B
ISO/F2  
IL, IUF  
IL, IUF  
IL, IUF  
IL  
IL, IUF  
IL, IUF  
IL, IUF  
IL  
B1  
ISO/F2X  
ISO/F3  
A
Group II 15 to 25 kg  
Group III 22 to 36 kg  
B2/B3  
B2/B3  
ISO/B2/B3b)  
ISO/B2/B3b)  
IL  
IL  
IUF: Suitable for forward-facing ISOFIX universal child restraint systems approved for use in this weight group.  
IL: It is suitable for certain ISOFIX child restraint systems (CRS) that can be for the speciꢀc vehicle, restricted or semi-universal categories. Take the  
child seat manufacturer's vehicle list into account.  
X: ISOFIX position not suitable for ISOFIX child restraint systems for this weight group or size class.  
a) The indication of class according to size corresponds to the authorised bodyweight for the child seat. In child seats with universal or semi-universal approval, the  
class according to size is indicated on the ECE approval label. The indication of class according to size is stated on the corresponding child seat.  
b) The headrest must be removed and the backrest reclined to install it on front seats.  
60  
Transportingchildren safely  
Vehicle i-Size positions  
Front passenger seat  
Rear side seat  
i-U  
Rear central seat  
airbag enabled  
airbag disabled  
X
i-U  
X
i-U: Position suitable for forward- or rear-facing i-Size child restraint systems with universal certiꢀcation.  
X: Position not suitable for i-Size child restraint systems.  
Securing the child seat with the ISOFIX or  
i-Size system  
Fig. 54 Rear seats: ꢀtting a child seat with  
Fig. 53 Front passenger seat: location of  
the ISOFIX system.  
the i-Size fastening rings.  
Fig. 52 Rear seat: location of the ISOFIX or  
i-Size securing rings.  
You must follow the child seat manufacturer's  
instructions.  
The location of the ISOFIX or i-Size anchor  
points is indicated by a symbol ››› Fig. 52 ,  
››› Fig. 531). In some vehicles, the rings are  
secured to the seat frame and, in others, they  
are secured to the rear ꢁoor.  
1)  
Not available on all markets.  
61  
Safety  
●
If necessary, remove the protective caps  
Top Tether securing belts  
from the ISOFIX or i-Size anchor points.  
●
Press the child seat onto the ISOFIX or iSize  
retaining rings until it is heard to engage se-  
curely ››› Fig. 54. If the child seat is equipped  
with Top Tether anchor points, secure it to the  
correspondent ring ››› page 62. Follow the  
child seat manufacturer’s instructions.  
●
Pull on both sides of the child seat to ensure  
that it is properly anchored.  
Fig. 57 Rear part of the rear seats: Top  
Tether strap anchor.  
Child seats with the ISOFIX or i-Size and Top  
Tether attachment system can be purchased  
from technical services.  
Fig. 55 Rear seats: adjustment and  
assembly according to the Top Tether belt.  
WARNING  
The securing rings are designed only for use  
with ISOFIX or i-Size and Top Tether system  
child seats.  
●
Never secure other child seats that do not  
have ISOFIX, i-Size or Top Tether systems, or  
safety belts or any other objects to the se-  
curing rings – as this can result in potentially  
fatal injuries to the child.  
Fig. 58 Rear of front passenger seat  
backrest: Top Tether strap anchor (not  
available on all markets).  
●
Ensure that the child seat is correctly se-  
cured to the ISOFIX or i-Size rings and the  
Top Tether.  
Fig. 56 Passenger seat: adjustment and  
assembly according to the Top Tether belt.  
Child seats with a Top Tether system are ꢂtted  
with an additional strap for fastening to an an-  
chor point in the vehicle. This anchor point  
is located on the rear of the rear seat back-  
62  
Transportingchildren safely  
Releasing the retaining strap  
rest and of the front passenger seat backrest  
1) (identiꢂed with the symbol ) and provides  
better retention.  
Fitting a child seat using the seat  
belt  
●
Loosen the strap following the manufactur-  
er's instructions.  
If you want to ꢂt a universal approval category  
(U) child seat in your vehicle, you must check  
that the seat is approved for your vehicle.  
The objective of this system is to reduce for-  
ward movements of the child seat in a head-on  
collision, to reduce the risk of injuries that may  
be caused to the child’s head by impacting  
against any element of the inside of the vehi-  
cle.  
●
Push the lock and release it from the anchor-  
ing support.  
You will ꢂnd any necessary information on the  
child seat’s orange ECE approval label.  
WARNING  
An undue installation of the safety seat will  
increase the risk of injury in the event of a  
crash.  
The following table shows the diꢀerent ꢂtting  
options.  
Using the Top Tether in rear-facing mounted  
seats  
●
Never tie the retainer strap to a hook in the  
luggage compartment.  
Currently, there are very few rear-facing child  
safety seats that have Top Tether. Please care-  
fully read and follow the seat manufacturer in-  
structions to learn the proper way to install the  
Top Tether strap.  
●
Never secure or tie luggage or other items  
to the lower anchorages (ISOFIX) or the up-  
per ones (Top Tether).  
WARNING  
Securing the retainer strap  
Child restraint anchors are designed to sup-  
port the loads of properly adjusted child  
restraint systems. Under no circumstances  
should they be used to attach adult seat  
belts, harnesses or other items or equipment  
to the vehicle.  
●
Follow the manufacturer's instructions to de-  
ploy the child seat Top Tether retaining strap.  
●
Position the belt under the headrest (ac-  
cording to the instructions of the seat it-  
self, lift or remove the headrest if necessary)  
››› Fig. 55 , ››› Fig. 56.  
●
Slide the strap and secure it properly with the  
anchor on the rear seat backrest ››› Fig. 57 ,  
››› Fig. 58.  
●
Firmly tighten the strap following the manu-  
facturer's instructions.  
1)  
Not available on all markets.  
63  
Safety  
Front passenger seata)  
Weight group  
Rear side seat  
Rear central seatb)  
Airbag enabled  
Airbag deactivatedc)  
Group 0 to 10 kg  
Group 0+ to 13 kg  
Group I 9 to 18 kg  
Group II 15 to 25 kg  
Group III 22 to 36 kg  
X
X
X
X
X
U
U
U
U
U
U
U
U
U
UF  
UF  
UF  
UF  
UF  
UF  
X: Not compatible for the installation of seats install chairs in this conꢀguration.  
U: Suitable for universal restraint systems for use in this weight group.  
UF: Acceptable for front-facing universal-category child restraint systems approved for this mass group.  
a) Compliance with current national legislation and the manufacturer's instructions is required when using or installing child seats.  
b) For semi-universal chairs where the securing system is the car safety belt and the support bracket, do not use them in the centre rear seat.  
c) Seats without height adjustment should be placed in their rearmost position. Seats with height adjustment should be placed in their rearmost and highest  
position.  
●
Put the seat belt in place and pass it through  
Fitting a child seat using the seat belt  
WARNING  
the child seat according to the instructions of  
the child seat manufacturer.  
When travelling, children must be secured in  
the vehicle with a restraint system suitable  
for age, weight and size.  
●
●
Make sure that the seat belt is not twisted.  
Insert the latch plate into the seat's buckle  
●
Always read and observe information and  
warnings concerning the use of child seats  
until you hear the engagement click.  
››› page 57.  
Fig. 59 On rear seats: installing a child seat.  
64  
In case of emergency  
5. Follow the legal provisions of each coun-  
try (reꢁective vest, warning triangles, light  
beacon, etc.).  
WARNING  
In case of emergency  
●
The risk of an accident increases if your  
Hazard warning lights  
vehicle breaks down. Always use the hazard  
warning lights and a warning triangle (or light  
beacon, depending on the country) to draw  
the attention of other road users to your sta-  
tionary vehicle.  
6. Always carry the key with you when leaving  
the vehicle.  
All turn signals ꢁash simultaneously when the  
hazard warning lights are switched on. The two  
turn signal turn signal lamps  
and the turn  
●
Never leave anybody inside the vehicle,  
signal lamp in the switch will ꢁash at the  
same time. The simultaneous hazard warning  
lights also work when the ignition is switched  
oꢀ.  
particularly children or anybody who may  
need help. This is especially important when  
the doors are locked. Individuals locked in  
the vehicle can be exposed to very high or  
very low temperatures.  
While the hazard warning lights are on, you can  
signal a direction or lane change, e.g. during  
towing, by operating the turn signal lever. The  
hazard warning lights remain switched oꢀ dur-  
ing this time.  
Note  
Fig. 60 Dashboard: switch for hazard  
warning lights.  
●
The 12-volt vehicle battery will run down  
if the hazard warning lights are left on for a  
long time (even if the ignition is switched oꢂ).  
The hazard warning lights are used to draw the  
attention of other road users to your vehicle in  
emergencies.  
Emergency braking warning  
●
The use of the hazard warning lights de-  
scribed here is subject to the relevant statu-  
tory requirements.  
If the vehicle brakes suddenly and continu-  
ously at a speed of more than 80 km/h (50  
mph), the brake light ꢁashes several times per  
second to warn the vehicles driving behind.  
If you continue braking, the hazard warning  
lights will come on automatically when the  
vehicle comes to a standstill. They switch oꢀ  
automatically when the vehicle starts to move  
again.  
If your vehicle is stationary:  
1. Park the vehicle at a safe distance from  
road traꢀic.  
Behaviour in the event of an acci-  
dent or ꢀre  
2. Press the button to switch on the hazard  
warning lights ›››  
.
Actions to take in the event of a ꢀre or acci-  
dent  
3. Apply the electronic parking brake.  
4. Connect the drive system.  
For your own safety and that of other passen-  
gers, the following points should be observed  
in the order given ›››  
:
65  
Safety  
●
●
Connect the drive system.  
WARNING  
If possible, switch on the hazard warning  
In the event of ꢀre, an explosion may occur  
and substances harmful to health may be re-  
leased, which can cause serious injury.  
lights ››› page 65.  
●
Follow the legal provisions of each country  
(reꢁective vest, warning triangles, light beacon,  
etc.).  
●
Never stay near the burning vehicle.  
●
If necessary, get any people out of the haz-  
Note  
ard area and apply ꢂrst aid.  
If the system detects an accident, the high-  
voltage battery is automatically deactivated.  
●
Notify the emergency services. Tell them  
that it is an electric vehicle.  
Fig. 62 Emergency call button.  
●
If the battery is deactivated, contact a  
●
Wait at a safe distance from the scene of the  
specialist workshop and have the battery re-  
paired.  
accident for the emergency services to arrive.  
Depending on the equipment, an emergency  
call system may be located on the roof con-  
sole.  
●
Inform the emergency services and persons  
involved in the accident that it is an electric  
vehicle.  
The following voice services can be run by  
Emergency call service  
●
In case of ꢂre, do not attempt to extinguish  
pressing the buttons  
,
and ››› Fig. 61:  
the ꢂre yourself or remain near the vehicle.  
●
●
●
information call  
assistance call  
WARNING  
emergency call service.  
For your own safety, do not ignore this im-  
portant check list, otherwise accidents and  
serious injuries could occur.  
A built-in control unit establishes the connec-  
tion.  
When a voice service is activated, a connec-  
tion is established with a phone line.  
●
Always complete the operations on the  
check list and always bear in mind the gen-  
eral safety measures.  
Control lamp  
Fig. 61 On the roof console: controls for  
There is a control lamp on the control  
››› Fig. 61 (arrow). It shows the following sta-  
tuses:  
voice services.  
66  
In case of emergency  
●
●
Oꢂ: the eCall service is not available.  
Vehicle location data is continuously overwrit-  
ten. This means that the vehicle is not subject  
to permanent monitoring.  
Starting an emergency call manually  
Flashes in red, approx. 20 seconds after  
●
Brieꢁy press the button cover and open  
swing on the ignition: the eCall service is de-  
activated.  
the cover ››› Fig. 62.  
The data related to the emergency call is only  
processed to ensure the correct operation of  
the emergency call system (eCall). The system  
will automatically delete the data related to the  
call a few hours after the call is activated.  
●
Press and hold the emergency call button  
●
Lights up red: system failure. The eCall serv-  
1
for a few seconds ››› Fig. 62 . The emer-  
gency call is activated and a voice connection  
is established with the emergency coordina-  
tion centre.  
ice is available with certain restrictions. CUPRA  
suggests going to a specialised workshop.  
●
Lights up green: the eCall service is availa-  
The sent data includes:  
ble. The system works correctly.  
If you press the emergency call button inadver-  
tently, hang up the call immediately:  
●
The vehicle's current position at the time the  
●
Flashes green: There is an ongoing voice  
emergency call is activated.  
connection.  
●
Press the emergency call button again until  
●
●
●
●
●
Vehicle identiꢂcation number (VIN)  
Type of vehicle and type of drive.  
Type of activation (automatic or manual).  
Type of call.  
the control light stays green.  
Emergency call service1)  
Integrated battery  
The automatic emergency call is only activated  
if the ignition is switched on.  
The integrated battery ensures that the emer-  
gency call system (eCall) remains available for  
some time even if the 12-volt battery has been  
disconnected or has failed.  
If the airbags or, if applicable, the seatbelt ten-  
sioners are triggered, a connection is automat-  
ically established with the emergency coordi-  
nation centre. The automatic emergency call  
cannot be interrupted by pressing the button  
1
Direction in which the vehicle was travelling  
at the time the emergency call was activated.  
●
●
Moment of the collision.  
If the integrated battery discharges or is de-  
fective, a message stating this is displayed on  
the instrument cluster display. Go to a special-  
ised workshop and ask for the battery to be  
replaced.  
Estimated number of vehicle occupants.  
››› Fig. 62  
.
Situations in which the emergency call serv-  
ice may be restricted  
If the emergency coordination centre's ques-  
tions are not answered, the corresponding as-  
sistance measures are implemented.  
●
The emergency call is made from an area  
with weak or no mobile and GPS signal, as well  
as e.g. tunnels, between very tall buildings, ga-  
rages, underground walkways, mountains and  
valleys.  
EDR data transmission ››› page 324  
The person on the other end of the line uses  
the language of the country in which you are  
driving.  
When an emergency call is made, the legally  
required data is transmitted to the emergency  
coordination centre so that the necessary as-  
sistance measures can be determined.  
1)  
Only available in certain countries.  
67  
Safety  
●
The components of the vehicle required for  
the emergency phone call are damaged or do  
not get enough power.  
●
In some countries, the emergency call serv-  
ice may not be available and depending on the  
location of the vehicle, the control lamp LEDs,  
and even the operation of the diꢀerent types  
of calls, could have a speciꢂc behaviour.  
Assistance call1)  
With the breakdown call you can directly re-  
quest specialised help in the event of a break-  
down.  
Parallel to the voice call, some vehicle data is  
transmitted, e.g. your current location.  
Information call1)  
With a information call, a call is placed to the  
customer care service of SEAT. S.A.  
Note  
●
Breakdown service and information calls  
can incur an additional cost on your tele-  
phone bill.  
●
The operation of the eCall system, which is  
required by law, may be limited if an infotain-  
ment system is retroꢀtted.  
1)  
Only available in certain countries.  
68  

Related Topics

Popular Owner Manuals