2024-2026 Cupra Terramar SUV Air conditioning -> Heating, ventilation and cooling User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Air conditioning -> Heating, ventilation and cooling for Your Cupra Terramar SUV First Generation (2024-2026)

Air conditioning
145
Heating, ventilation and cooling
1)
Valid for hybrid vehicles.
Air conditioning
Heating, ventilation and
cooling
Introduction
Depending on the vehicle equipment, the air
conditioning systems can be:
●
Climatronic of 1 zone: heats, ventilates,
cools and dehumidies the passenger com-
partment considering it as a single air condi-
tioning area.
●
The 3-zone climatronic: heats, ventilates,
cools and dehumidies the passenger com-
partment considering it as 3 independent air
conditioning areas (driver, front passenger and
rear seats).
There are several ways to switch on the air con-
ditioning:
●
Press in the air conditioning menu
›››page148.
●
OR: by tapping any button in the air condi-
tioning menu directly related to the air condi-
tioning (for example temperatures, etc.).
Some functions and menu tabs depend on the
equipment.
Economic use of the air conditioning
Extra fuel (combustion engines) or electricity
(hybrid in electric mode) may be consumed by
the compressor while the air conditioning is
on.
The air conditioning operates most eectively
with the windows and the sunroof closed.
However, if the passenger compartment has
heated up after standing in the sun for some
time, the air inside can be cooled more quickly
by briey opening the windows and the sun-
roof.
Operating the air conditioning with voice
commands
Depending on the equipment, some of the
air conditioning functions can be operated by
voice control ›››page290.
Passenger recognition function
1)
The front and rear zone passenger recognition
function turns down the air conditioning in
these areas if no occupation is detected in
them, with the aim of reducing the vehicle’s
energy consumption.
When the ignition is switched on, the vehicle
recognises whether a person is sitting in one of
its seats.
The turning down of the air conditioning is in-
dicated as follows:
●
Front passenger area: on the front passenger
temperature setting, which will display ECO in-
stead of the selected temperature.
●
Rear area: On the rear temperature setting,
where ECO will be displayed instead of the se-
lected temperature. This turning down of the
air conditioning will also be displayed on the
control located in the rear area.
Dust and pollen lter
The dust and pollen lter with its activated
charcoal cartridge serves as a barrier against
impurities in the air taken into the vehicle inte-
rior.
The dust and pollen lter must be changed
regularly so that air conditioner performance is
not adversely aected.
If the lter loses eiciency prematurely due
to use in areas with very high levels of air
pollution, the lter must be changed more fre-
quently than stated in the Service Schedule.
Air vents
To ensure proper heating, cooling and ventila-
tion in the vehicle interior, the air vents must
remain open.
There are other additional, non-adjustable air
vents in the instrument panel, in the footwells
and in the rear area of the passenger compart-
ment.
146
Air conditioning
WARNING
Reduced visibility through the windows in-
creases the risk of serious accidents.
●
Always ensure that all windows are free of
ice and snow, and that they are not fogged,
so as to maintain good visibility of everything
outside.
●
Only drive when you have good visibility.
●
Always ensure that you use the air condi-
tioner and heated rear window to maintain
good visibility.
●
Never leave the air recirculation on for a
long period of time. If the cooling system
is switched o and air recirculation mode
switched on, the windows can mist over very
quickly, considerably limiting visibility.
●
Switch air recirculation mode o when it is
not required.
NOTICE
Food, medicines and other objects sensitive
to heat or cold may be damaged or made
unsuitable for use by the air coming from the
vents.
●
Never place food, medicines or other tem-
perature-sensitive objects close to the air
vents.
Note
●
When the cooling system is turned o, air
coming from the outside will not be dried. To
prevent fogging of the windows, CUPRA rec-
ommends leaving the cooling system turned
on. To do this, press the function button
.
The icon should light up.
●
The maximum heat output required to de-
frost windows as quickly as possible is only
available when the engine has reached its
normal running temperature.
●
Keep the air intake slots in front of the
windscreen free of snow, ice and leaves to
ensure heating and cooling are not impaired,
and to prevent the windows from misting
over.
●
The air from the vents ows through the
vehicle interior and is extracted through slots
in the luggage compartment designed for
this purpose. Therefore, you should avoid
obstructing these slots with any kind of ob-
ject.
●
It is advisable to turn on the air condition-
ing at least once a month, to lubricate the
system gaskets and prevent leaks. If a de-
crease in the cooling capacity is detected,
a Technical Service should be consulted to
check the system.
●
When the engine is under extreme strain,
switch o the compressor for a moment.
Air conditioning
147
Heating, ventilation and cooling
Temperature
Climatronic control
Fig.110 Schematic representation: air-
conditioning functions.
A
Climabar
Fixed bar at the bottom of the Infotainment
System display ›››
Fig.110
A
where the fol-
lowing Air Conditioning functions are located:
Tapping on the numbers them-
selves opens a pop-up window for tem-
perature settings using the symbols
or
.
OR: use the touch zones
1
and
2
(blue /
red) to adjust the temperature of the Air
Conditioning ›››
Fig.110.
Click on the symbol to change the heat
setting. To turn o the heating, press
the button until the light level is o. It
can also be controlled via the main Seats
menu ›››
page151.
OR: the seat heating can be controlled by
tapping with two ngers at once on touch
zones
1
(for driver) and
2
(for passen-
ger) (depending on the equipment).
The defrost/demist function of the Cli-
matronic removes ice and condensation
from the windscreen. The air is dehu-
midied and the fan is set to high.
When this function is switched on, the rear
air conditioning remains switched o.
Press this to access the Air Condition-
ing menu ›››
page148.
Switches the heated window on or o
when the engine is running. It switches
o automatically after a maximum of 10
minutes. It should be switched o as soon
as the glass is demisted. To avoid possi-
ble damage to the battery, this function
may temporarily disconnect automatically
and come back on when normal operating
conditions are re-established.
Favourites (depending on the equipment)
With the exception of temperatures, seat
heating, , and , all other buttons on
the Climabar are customisable:
1. Press and hold the button that you want to
congure. A box showing all the possible
options drops down.
2. Select one of these options. The button
will be congured with this option.
3. Close the box to return to the infotainment
menu.
148
Air conditioning
Vents
Air Conditioning Menu
Fig.111 Schematic representation: Air
conditioning menu.
The following functions are available in the Air
conditioning menu, depending on the equip-
ment:
Front submenu
Submenu for the air conditioning in the front
of the vehicle interior where the following
functions are found:
Switching the Climatronic o/on
›››Fig.111
A
.
Synchronises the temperature settings
from the driver's side to the front passen-
ger and/or rear area. Activates the tem-
perature control for the passenger side
›››
Fig.110
2
and/or rear zone to set a
dierent temperature.
The colour of the arrows in the image of
the vehicle interior indicates the tempera-
ture requested depending on the ambient
conditions, not the air outlet temperature.
The direction of the air outlet is selected
with the buttons ›››
Fig.111
B
.
Switching air recirculation on and o
›››
page149.
Manual steering wheel heating setting
with three heating levels. Press the func-
tion
button repeatedly to achieve the
desired level. To disconnect it, press sev-
eral times until no LED is on ›››page153.
Switching the cooling and demisting
system on/o.
Switching the maximum cooling output
on and o. The air recirculation mode
switches on automatically and the Clima-
tronic automatically directs the air to the
upper body.
The air conditioning system contains a
lter that can reduce allergen contami-
nants. When the Air Care function is ac-
tivated, the recirculation mode is on and
the air is regulated automatically and con-
tinuously, as long as no fogging hazard is
detected.
Information about the AirCare system
can be found in the Settings submenu .
Air conditioning
149
Heating, ventilation and cooling
/
Manual adjustment of fan speed by tap-
ping or .
OR: by pressing or sliding your nger on
the lines until the desired fan speed is
reached.
In this mode, the system automatically
regulates the interior temperature, fan
speed and air distribution for optimal
thermal comfort. The mode will de-
activate as soon as manual changes are
made to the fan speed, air distribution,
windscreen demisting or air recirculation.
Fan speed in mode can be set to low,
medium or high by successively tapping
the function button.
iClimate submenu
Submenu where dierent smart and/or auto-
matic functionalities are located, depending
on the version.
Warm hands: automatically adjusts the
air conditioning for a certain time to heat
the steering wheel area.
Cool feet: automatically adjusts the air
conditioning for a certain time to cool
the footwell area.
Demist the windows: automatically ad-
justs the air conditioning for a certain
time to demist the windscreen.
Warm feet: automatically adjusts the air
conditioning for a certain time to heat
the footwell area.
Fresh Air: automatically adjusts the air
conditioning for a certain time to venti-
late the vehicle interior.
Fast cooling: automatically adjusts the air
conditioning to ventilate the vehicle in-
terior for a certain amount of time.
Rear Submenu
Submenu for the air conditioning in the rear of
the vehicle interior where the following func-
tions are found:
When the rear lock is activated, it is not
possible to adjust the temperature from
the rear zone.
Press to adjust the rear zone tempera-
ture.
Settings submenu
Submenu where the following settings are lo-
cated:
●
Heated steering wheel switched on at start of
journey depending on temperature: select one
of the three heating levels and/or O from the
dropdown menu ›››page153.
Rear controls
Fig.112 In the centre console, rear
section: controls for the rear seats.
Temperature selection
●
Press buttons
1
and
2
›››
Fig.112 to ad-
just the temperature of the rear zone.
Air recirculation
Air recirculation mode prevents the am-
bient air from entering the interior.
When the outside temperature is very high,
you can select air recirculation for a short pe-
riod of time to refresh the vehicle interior more
quickly.
For safety reasons, air recirculation is discon-
nected when
is pressed or when a sensor
detects that the vehicle's windows may mist
up.
150
Air conditioning
Switching air recirculation on and o
●
Press the button to switch air recirculation
on or o.
WARNING
Stuy or stale air will increase fatigue and re-
duce driver concentration possibly resulting
in a serious accident.
●
Never leave the fresh air fan turned o or
use the air recirculation for long periods of
time; the air in the vehicle interior will not be
refreshed.
NOTICE
In vehicles with an air conditioner, do not
smoke when air recirculation is switched on.
The smoke may be deposited on the cooling
evaporator and on the active combination l-
ter and cause permanent unpleasant odours.
Note
When the outside temperature is very high,
briey switching on the air recirculation
mode helps to cool the vehicle interior more
quickly.
Air conditioning
151
Heating, ventilation and cooling
Seat heating
Fig.113 Schematic representation: Seats
menu
The front seats have three levels of electric
heating.
Turning on the seat heating
There are several ways to switch on the front
seat heating:
●
Tap on the symbol located in: main menu
Seats > Air conditioning.
●
Tap on the Climabar symbol ›››Fig.110.
●
Tap with two ngers at once on touch
zones
1
(for driver) and
2
(for passenger)
›››
Fig.110.
Controlling seat heating
●
Press the corresponding seat function but-
ton to switch on the seat heating to maximum
power.
●
Press the function button of the correspond-
ing seat repeatedly until the desired level is set.
●
To switch o seat heating, press the corre-
sponding seat icon several times until no LED is
on.
If the passenger leaves his or her seat while
the seat heater and drive system are switched
on, the heating of that seat switches o auto-
matically. The indication on the infotainment
system turns grey after approx 2 seconds. If
the passenger sits down again while the drive
system is still switched on, the seat heating
switches on again automatically.
If the heating of this seat switches o automat-
ically, you can switch it on again manually if
necessary, even if the seat is unoccupied.
Smart heated seat
Availability depending on the equipment. This
is an smart function that automatically acti-
vates and regulates the driver and front pas-
senger seat heating for greater comfort.
The seat heating for the driver's seat and front
passenger seat can be adjusted separately to
achieve fully adapted comfort. In addition, in
152
Air conditioning
the case of the driver, the function can be per-
sonalised, depending on the user registered in
the vehicle.
To access the smart heated seats function,
the CUPRA CONNECT personalisation service
must rst be activated ›››page271.
●
To activate/deactivate the function go to the
seat heating submenu, and press on the Auto-
matic heating button below the image of the
corresponding seat.
The smart heated seats function requires a pe-
riod for learning usage habits. The start of the
learning process is indicated by the informative
text Learning 0% which will appear above
the function's activation/deactivation button.
During this process, the learning percentage
increase will be shown in this informative text,
until 100% learning is achieved.
Seat heating level 3 (maximum) needs to be
used to ensure that habits are learned cor-
rectly.
During the learning period, it is advisable to
use the seat heater at dierent outside tem-
peratures to achieve optimal performance of
the smart heated seats.
The system will not learn about the use of the
seat heating if it is used straight after using the
seat heating with stationary air conditioning.
Once 100% learning has been achieved, au-
tomatic mode will activate. This mode is also
represented by an A next to the corresponding
seat button on the air conditioning bar, which
is always visible at the bottom of the screen.
The heating can be congured at any time. If
the automatic mode is activated, the text Op-
timising is displayed and the automatic mode
will take into account this new conguration
or modication that the user has made to the
seat heating (e.g. changing the heat setting,
etc.).
To reset the process and start the learning
period, go to the submenu Settings > Reset
driver / front passenger prole.
Tap to access information about the func-
tion.
Cases in which heat seating should not be
switched on
Do not switch seat heating on if any of the
following conditions are met:
●
The seat is occupied by a person with limited
perception of pain or temperature.
●
The seat is not occupied.
●
The seat has a cover.
●
A child seat has been installed on the seat.
●
The seat cushion is wet or damp.
●
The outdoor or vehicle interior temperature
is higher than +25°C (77°F).
WARNING
People who cannot perceive pain or temper-
ature because of medications, paralysis or
chronic diseases (e.g. diabetes) or have a
limited perception of these, may suer burns
to the back, buttocks or legs when using seat
heating.
●
People with limited pain and temperature
thresholds must never use seat heating.
●
If an abnormality in the device's tempera-
ture control is detected, have it checked by a
specialist workshop.
WARNING
If the fabric of the cushion is wet, this can ad-
versely aect the operation of the seat heat-
ing, increasing the risk of burns.
●
Make sure the seat cushion is dry prior to
using the seat heater.
●
Do not sit on the seat with clothing that is
wet or damp.
●
Do not leave clothing that is wet or damp
on the seat.
●
Do not spill liquids on the seat.
Air conditioning
153
Heating, ventilation and cooling
NOTICE
●
To avoid damaging the heating elements of
the seat heaters, do not kneel on the seat or
apply sharp pressure to a single point on the
seat cushion or backrest.
●
Liquids, sharps objects and insulating ma-
terials (e.g. covers or child seats) can damage
the seat heating.
●
In the event of odours, switch o seat heat-
ing immediately and have it inspected by a
specialised workshop.
●
If the original seat upholstery is replaced by
another material, seat heating may overheat
or its operation may be limited.
For the sake of the environment
Seat heating should remain on only when
needed. Otherwise, it is unnecessary energy
consumption.
Note
Please note the following for the smart
heated seats feature:
●
The system may reset the learning process
if it has not been satisfactory.
●
Separate driver’s seat learning will be re-
quired for each registered user.
●
The passenger seat learns regardless of the
active registered user.
●
In hybrid vehicles the use of the station-
ary air conditioning function with electricity
consumers ›››
page158 may aect the
learning time of the function.
Steering wheel heating
The selected steering wheel heating level will
be displayed on the instrument cluster display
and in the air conditioning menu.
Adjusting steering wheel heating by pressing
on the multifunction steering wheel
●
Short press (less than 1 second):
Heating is switched on at its maximum level.
Press the steering wheel button repeatedly to
set the desired level. To switch o steering
wheel heating, press the steering wheel button
repeatedly until the heated steering wheel
icon is displayed on the instrument cluster.
●
Long press (more than 1 second):
Heating is switched o directly from the cur-
rent operating level Another long press on the
button switches on heating directly at the last
level saved before switching o.
Adjusting steering wheel heating via the in-
fotainment system
●
In the air conditioning menu, press the steer-
ing wheel heating function button . Heating
is switched on at its maximum level.
●
Press the function button repeatedly to set
the desired level.
●
To switch o steering wheel heating, press
the function button several times until no LED
is on.
Automatic disconnection
Steering wheel heating will be switched o au-
tomatically when any of the following condi-
tions are met:
●
Electrical energy consumption is too high.
●
The steering wheel heating system is faulty.
●
If the ignition is switched o.
Parking ventilation
The vehicle interior can be ventilated with the
stationary ventilation function (depending on
equipment).
The power required for parking ventilation will
be provided by the vehicle's 12V battery.
The ventilation function is controlled using the
My CUPRA App.
Switching on the stationary ventilation
The function can be switched on as follows:
●
The parking ventilation function can be
switched on immediately using the immediate
on/o button in the My CUPRA App.
●
By programming a departure time.
154
Air conditioning
In the event of low level charge of the 12V bat-
tery, the parking ventilation will not turn on.
Disconnecting parking ventilation
The parking ventilation will turn o in the fol-
lowing situations:
●
When the operating time for the immediate
on/o mode has elapsed.
●
The parking ventilation function can be
switched o immediately using the immediate
on/o button in the My CUPRA App.
●
When the scheduled departure time has
been reached.
The maximum operating period of the parking
ventilation is 30 min.
Programming a departure/trip start
The activation of the parking ventilation for a
scheduled time is only valid for a single ventila-
tion process. The departure time must be for
each newly programmed ventilation process.
Before programming the departure time, you
must check that the date and time of the car
are correctly set.
When programming a departure time, the car
automatically calculates, depending on the
environmental conditions, the necessary op-
erating time of the parking ventilation.
NOTICE
Foods sensitive to heat or cold, medications
and other objects can be damaged by the
airow.
●
Do not place any type of food, medicines or
other temperature sensitive items in front of
the ventilation slots.
Note
If parking ventilation runs repeatedly for long
periods of time, the 12V battery charge level
will drop. It is advisable to take the vehicle for
a long drive to recharge the battery.
Troubleshooting
The cooling system cannot be switched on
or its operation is limited
If the air conditioning system cannot be
switched on, this may be caused by the follow-
ing:
●
The engine is not running.
●
The fan is switched o.
●
The air conditioner fuse has blown.
●
The outside temperature is lower than ap-
proximately 0°C (+32°F).
●
The air conditioner compressor has been
temporarily switched o because the engine
coolant temperature is too high.
●
Another fault in the vehicle. Have the air
conditioner checked by a specialised work-
shop.
Change the temperature unit (Climatronic)
The temperature display can be changed from
Celsius to Fahrenheit on the Infotainment Sys-
tem display using the function button > Set-
tings > Units.
Water or water vapour under the vehicle
If the humidity and temperature outside the
vehicle are high, condensation can drip o
the evaporator in the cooling system and form
a pool underneath the vehicle. This is normal
and does not indicate a leak!
When the outside humidity is high and the am-
bient temperature is low, condensation water
may evaporate when the stationary air condi-
tioning is operating. In this case, steam may
come out from under the vehicle. This does
not mean that the vehicle has any damage.
Note
After starting the engine, any residual hu-
midity in the air conditioner could mist over
the windscreen. Switch on the defrost func-
tion as soon as possible to clear the wind-
screen of condensation.

Related Topics

Popular Owner Manuals