2024-2026 Cupra Terramar SUV Air conditioning -> Stationary air conditioning User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

Air conditioning -> Stationary air conditioning for Your Cupra Terramar SUV First Generation (2024-2026)

158
Air conditioning
WARNING
Never program the auxiliary heating to switch
on and operate in an enclosed or unventila-
ted space. The exhaust gases from auxiliary
heating contain carbon monoxide, a toxic,
colourless and odourless gas. Carbon mon-
oxide can cause loss of consciousness and
death.
Usage instructions
The auxiliary heater exhaust system located
below the vehicle must be kept clear of snow,
mud and other objects. The exhaust fumes
must be able to exit freely. The emissions gen-
erated by the auxiliary heater are removed via
an exhaust pipe tted underneath the vehicle.
On heating the vehicle interior, depending on
the outside temperature, the warm air is rst
directed at the windscreen and then to the rest
of the vehicle interior through the air vents.
Directing the vents – towards the windows for
example – can aect air distribution.
When the auxiliary heater is not switched on
●
The auxiliary heater requires about as much
power as the dipped beam headlights. If the
12-volt battery charge is too low, the auxiliary
heater switches o automatically and cannot
be switched on. This avoids problems when
starting the engine.
●
The heating must be activated every time
you want to set o. Similarly, the departure
time must reactivate each time.
●
The control lamp (fuel level indicator)
lights up.
Note
●
Noises will be heard while the auxiliary
heater is running.
●
When the outside humidity is high and the
ambient temperature is low, condensation
from the heating and fresh air system may
evaporate when auxiliary heater is on. In this
case, steam may come out from under the
vehicle. This does not mean that there is an
fault in the vehicle.
●
If the vehicle is tilted, e.g. if parked on a
slope, the operation of the auxiliary heater
may be restricted if the fuel tank level is low
(just above the reserve level).
●
If the auxiliary heater is used a number
of times for a long period of time, the 12-
volt battery will lose its charge. In order to
recharge the battery, the vehicle must be
driven a few kilometres from time to time. As
a guide: the run should last approximately as
long as the heating has been switched on.
●
At temperatures below +5°C (+41°F), the
auxiliary heater may switch itself on auto-
matically when the engine is switched on.
The auxiliary heater is switched o again af-
ter a certain period of time.
Stationary air condition-
ing
Introduction
✓ Valid for: hybrid vehicles.
With the stationary air conditioning you can
cool, ventilate and heat the vehicle interior
while the vehicle is parked. In winter, you can
also demist the windscreen and leave it free of
ice and snow (if the layer is thin).
The stationary air conditioning is powered
through a socket or the vehicle’s high voltage
battery. The stationary air conditioning can
be programmed and controlled in the infotain-
ment system or via the My CUPRA App.
You can nd information about the app, its
availability and the necessary requirements for
its use, as well as compatible terminals, on the
Internet ›››page269.
NOTICE
Never place food, medicines or other tem-
perature-sensitive objects close to the air
vents. Food, medicines and other objects
sensitive to heat or cold may be damaged or
made unsuitable for use by the air coming
from the vents.
Air conditioning
159
Stationary air conditioning
Note
Using the stationary air conditioning with-
out connecting the charging cable reduces
the vehicle’s range. At extreme exterior tem-
peratures, the heating or cooling power of
the stationary air conditioning may be insuf-
cient to reach the desired temperature.
Managing the stationary air condi-
tioning
✓ Valid for: hybrid vehicles.
The stationary air conditioning only works if
the high voltage battery is suiciently charged.
The stationary air conditioning can be used
without the charging connector being plugged
in. When the charging connector is not plug-
ged in, the stationary air conditioning receives
the necessary electrical power from the high-
voltage battery.
Setting the desired temperature
●
Open the infotainment system’s Stationary
air conditioning menu.
●
Tap Air conditioning.
●
Set the desired temperature using and
Switching on the stationary air conditioning
It can be switched on in the following ways:
●
Press the immediate on icon in the Info-
tainment system (while the vehicle is switched
o). During immediate air conditioning, the
vehicle reaches the set temperature in a maxi-
mum of 30 minutes.
●
Press the immediate on/o button in the My
CUPRA App.
●
Automatically by scheduling a departure
time in the My CUPRA App or in the infotain-
ment system in the Stationary air condition-
ing ›››page159menu.
Switching o the stationary air conditioning
In can be switched o in the following ways:
●
Press the immediate on/o button in the My
CUPRA App.
●
Press the immediate on/o icon in the
infotainment system (while the vehicle is
switched o).
●
Press the air conditioning o button in the
Air conditioning menu of the infotainment
system (while the vehicle is o).
●
Automatically, a few minutes after the
scheduled departure time.
●
Automatically if the charge level of the vehi-
cle's high-voltage battery drops excessively.
Note
●
Noises will be heard while the stationary air
conditioning is running.
●
When the outside humidity is high and the
ambient temperature is low, condensation
from the air conditioning system may evapo-
rate when the stationary air conditioning is
running. In this case, steam may come out
from under the vehicle. This does not mean
that there is an fault in the vehicle.
Programming the stationary air
conditioning
✓ Valid for: hybrid vehicles.
The stationary air conditioning can be pro-
grammed in the Infotainment system for a
scheduled departure time. You can set the de-
sired temperature of the vehicle interior for the
vehicle’s planned departure time.
Based on the desired temperature, the vehicle
calculates the time that the stationary air con-
ditioning needs to be switched on to reach this
temperature by the departure time. The maxi-
mum pre-operation time of the stationary air
conditioning is approx. 30 minutes before the
departure time.
Air conditioning the vehicle for departure
●
Open the Stationary air conditioning menu.
●
Press Departure to open the timer menu.
160
Air conditioning
●
Set the scheduled departure time.
●
Activate the timer using the checkbox.
The earliest scheduled departure time is dis-
played in the infotainment system’s departure
menu, and can be switched on and o there
›››page42.
The stationary air conditioning switches o
automatically
●
After approx. 30 minutes if the vehicle is air-
conditioned by “Air condition now” with the
ignition switched o.
●
After approx. 15 minutes if the drive system
has not been switched on by one hour after
the scheduled departure time.
●
When the state of charge of the high voltage
battery drops excessively.
Stationary air conditioning with additional
electrical comfort consumers
If air conditioning for departure is to be used,
the electrical comfort consumers, such as seat
heating, steering wheel heating or the heated
rear window, can also be switched on automat-
ically before the departure time. The electri-
cal comfort consumers depend on the equip-
ment. They are only activated in low tempera-
ture conditions.
To enable the use of these consumers:
●
Open the Stationary air conditioning
menu.
●
Tap Air conditioning.
●
Select the seats whose comfort consumers
should be connected along with the station-
ary air conditioning. Only these seats will be
heated before the departure time.
●
To turn on the window heating before the
departure time, activate the Automatic win-
dow heating function
The maximum pre-operation time of the elec-
trical comfort consumers is approx. 10 minutes
before the departure time.
If the air conditioning is switched on imme-
diately, the electrical comfort consumers are
also activated.
Immediate activation of the rear window
heating
The heated windscreen can be switched
on/o using the My CUPRA App , whether or
not the stationary air conditioning is switched
on.
Air-conditioning the vehicle after unlocking
it
●
Open the infotainment system’s Stationary
air conditioning menu.
●
Press Settings.
●
Check the Air condition the vehicle after
unlocking check box by pressing it.
The vehicle will be air-conditioned for 5 mi-
nutes as soon as you unlock the vehicle door.
Air conditioning the vehicle during high-
voltage charging
If the vehicle’s high-voltage battery is to be
charged with alternating current (AC) or di-
rect current (DC), the vehicle can be air condi-
tioned before the scheduled departure time.
This can be set in the infotainment system, in
the Stationary air conditioning menu.
Note
For high voltage charging at low power with
alternating current (AC), charging may be
interrupted under certain conditions due to
the system's need to air condition the inte-
rior.
Check the schedule
When the ignition is switched o, the infotain-
ment system displays the next time that is ac-
tive and the set functions.

Related Topics

Popular Owner Manuals