2024-2026 Cupra Terramar SUV High-voltage battery User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

High-voltage battery for Your Cupra Terramar SUV First Generation (2024-2026)

78
High-voltage battery
High-voltage battery
Safety instructions
Introduction
Valid for: hybrid vehicles
WARNING
The vehicle’s high-voltage network and the
high-voltage battery are hazardous and can
cause burns and other injuries, including fa-
tal electric shocks.
●
It should always be assumed that the high-
voltage battery is fully charged and that all of
its components are live. This may also be the
case when the ignition is switched o.
●
Never touch the high-voltage cables, the
high-voltage battery or its poles, or allow
them to come into contact with jewellery or
other metal objects, especially if the high-
voltage cables, the high-voltage battery or its
poles are damaged.
●
Never take it upon yourself to perform any
type of work on the high-voltage network, on
the high-voltage cables or the high-voltage
battery.
●
Never open or perform maintenance or
repairs on components or parts of the high
voltage network, or disconnect them from
this network.
●
Never damage, modify or remove the or-
ange high voltage cables or disconnect them
from the high voltage network.
●
Never open, modify or remove the cover
from the high-voltage battery.
●
Work on the high-voltage system, as well
as on any systems that may be indirectly in-
uenced by it, should only be carried out by
specialized personnel with the correspond-
ing qualications and training.
●
Work in the immediate vicinity of high-
voltage cables and high-voltage components
with tools that are sharp, give o shavings or
that have heat sources, such as hot air, ther-
mal bonding or welding work, may only be
performed after disconnecting the voltage.
The high voltage should only be disconnec-
ted by specialized personnel with the corre-
sponding qualications and training.
●
All CUPRA guidelines and standards must
be followed when performing any work on
the high-voltage system and the high-volt-
age battery.
●
The gases that are emitted or leaked from
the high-voltage battery may be toxic or
ammable.
●
Damage to the vehicle or high voltage bat-
tery could cause an immediate or delayed
leak of toxic gases. The emitted gases could
also cause a re. Do not inhale the gases.
●
Never touch the liquids that spill from the
high voltage battery and do not touch the
emitted gases, particularly if the battery is
damaged.
●
In the event of a re, leave the danger area
and call the re department.
●
Always inform the re ghters and the
emergency service that the vehicle is tted
with a high-voltage battery.
WARNING
If works are performed on the high-voltage
system and on the high-voltage components
in an inappropriate manner, this may lead
to faults in the operation, accidents and inju-
ries.
●
Work on the high-voltage system must
only be performed by authorized specialized
services with the corresponding permit.
NOTICE
If the vehicle suers an accident or collision
with an obstacle, the high-voltage battery
must be checked by specialized personnel
with the corresponding qualications and
training.
High-voltage battery
79
Safety instructions
1
2
NOTICE
If the 12-volt vehicle battery has been dis-
connected, discharged or replaced, there is a
chance that the combustion engine may not
initially turn o automatically after moving
o. If this situation lasts for several days, con-
tact a qualied specialized workshop. CUPRA
recommends visiting a CUPRA partner for
this.
High voltage warning lettering
Valid for: hybrid vehicles
Warning lettering on the vehicle
The following parts of the vehicle can be
identied with the depicted warning lettering
›››
Fig.51, ›››Fig.52, ›››Fig.53 , ›››Fig.54:
●
Covers and lids behind which live high-volt-
age components are located.
●
All the high-voltage components, including
the high-voltage battery.
●
Under the front bonnet.
Fig.51 Warning lettering.
Fig.52 Warning lettering.
The warning lettering ›››
Fig.51 and
›››Fig.52 indicate high electrical voltage.
Fig.53 Warning lettering.
The components of the high voltage system
can become very hot and should not be
touched ›››Fig.53.
Fig.54 High-voltage battery warning
lettering.
›››
Fig.54
High voltage can cause serious injury or
even death. Never touch the battery poles
with bare ngers, tools, jewellery or other
metal objects.
The high-voltage battery contains hazard-
ous liquid and solid substances. Emitted
gases can cause severe burns and blind-
ness. Suitable eye protection and protec-
tive clothing must always be worn when
working on the high voltage battery to
prevent battery uid coming into contact
with the skin and eyes. If the battery uid
comes into contact with the skin or eyes,
the aected areas should be rinsed with
clean running water for at least 15 minutes,
and then a doctor should be consulted im-
mediately.
80
High-voltage battery
3
4
5
6
7
The high-voltage battery may burn. The
high-voltage battery should never be ex-
posed to re, sparks or naked ame. The
high voltage battery must always be han-
dled with care to avoid damage and uid
leakages.
The high-voltage battery should always be
kept out of the reach of children.
You will nd further information and warn-
ings in the usage instructions and work-
shop documentation.
Incorrect handling of the high-voltage
battery can cause serious injuries or death.
Never disassemble the high voltage bat-
tery or remove its cover.
Maintenance work on the high-voltage
battery must only be performed by speci-
alized personnel with the corresponding
qualications and training. Never modify
the high-voltage battery. When the high-
voltage battery is open, ensure it does not
come into contact with water or other
liquids. Liquids may cause short circuits,
electrical shocks and burns.
Conservation of the high-
voltage battery
Conservation instructions
Valid for: hybrid vehicles
Reliability and capacity of the high-voltage
battery
In principle, lithium ion batteries are subject
to ageing and wear and tear throughout their
useful life due to their physical and chemical
characteristics. Correct handling of the high-
voltage battery makes an essential contribu-
tion to keeping it in a reliable state in the
long term and to achieving high battery ca-
pacity and range. Therefore, it is extremely
important to respect the following conserva-
tion instructions for the high voltage battery.
These maintenance instructions are essential
for maintaining the vehicle's value over time.
Please also observe the applicable CUPRA war-
ranty conditions for the high-voltage battery.
Conservation instructions
CUPRA recommends the following conserva-
tion instructions:
●
If possible, charge the high-voltage battery
when a low charge level is displayed on the
instrument cluster, or when the electric range
is low ›››page19.
●
It is advisable to not charge the high-voltage
battery when only a short trip has been made
in full electric mode.
●
As much as possible avoid fully discharging
the high-voltage battery, such as by leaving the
vehicle parked for a prolonged time with a low
load level. The charge level must not drop be-
low 20% for long periods of time ››› .
●
When the high-voltage battery has been
charged to 100%, start driving immediately if
possible.
●
As far as possible, avoid loads above 80%.
Vehicle parking times
●
If there is a frost, do not park the vehicle for
several hours with a charge level of lower than
40% ››› .
●
If you plan to leave your vehicle stationary for
prolonged periods of time, park with a charge
level of at least 30%. This situation occurs, for
example, when you leave your vehicle at the
airport before a trip.
●
Do not expose the vehicle to outside tem-
peratures below -30°C or above 60°C for
more than 24 hours.
●
To improve comfort and performance, make
sparse use of the stationary air conditioning
(depending on the equipment), particularly in
temperatures lower than -15°C ›››page159.
NOTICE
The high-voltage battery must not be used
as a stationary power supply. This can cause
irreversible damage to the high-voltage bat-
tery.
High-voltage battery
81
Charging the high-voltage battery
NOTICE
If the vehicle is parked for a long time with
the high-voltage battery discharged, it may
no longer be possible to charge the bat-
tery or start the vehicle. Irreversible damage
could be caused to the high voltage battery
in the long term.
●
Charge the high-voltage battery at regular
intervals.
Charging the high-voltage
battery
Introduction
Valid for: hybrid vehicles
Check that the drive system is deactivated and
that the charging cable and infrastructure are
in a perfect state of repair.
Types of charging
The following charging types are possible for
the vehicle:
●
Charging with alternating current (AC) at a
public or home charging station ›››
page83:
Charging at high power. The maximum achiev-
able charging power depends on the charging
station and charging cable that is used and the
performance of the vehicle's charger.
●
Charging with alternating current (AC) at a
household socket ›››page83:
The electrical installation of the house must
have been checked and be in perfect working
order ››› . Due to the large capacity of the
battery and the low power of this method, a full
charge will take more than 20 hours (8 hours,
depending on the market).
●
Charging with direct current (DC) at a fast
charging station ›››page84:
This is the most powerful type of charge. The
charging time decreases signicantly. Please
note the information on charging frequently
with direct current (DC) ››› .
Protection against current leakage
The vehicle is tted with a direct current (DC)
leakage protection device. This prevents any
current leakage that may occur during charg-
ing from reaching the house's electrically in-
stallation through the charging cable.
WARNING
If the battery is charged in an inappropri-
ate manner, if no consideration is given to
the appropriate safety measures or the high-
voltage battery is used in an inadequate
manner, this could lead to short circuits,
electrical shocks, explosions, res, burns and
serious injuries, and even death.
●
Always respect the stipulated order of the
operations to avoid the risk of suering an
electric shock or serious injuries due to the
residual energy in the charging accumulator.
●
Please observe the safety and handling
instructions of the charging cable supplied
with the vehicle ›››page94.
●
When charging, only use power sockets
that are appropriately tted, have been
checked and are not damaged, as well as
electrical installations that are in perfect
working order. Duly qualied technicians
should check the power sockets and the
electrical installation on a regular basis.
●
Never charge the vehicle in places where
there is a danger of explosion. The compo-
nents of the charging cable can cause sparks
and, therefore, may ignite ammable fumes
or explosives.
●
Always protect the connectors from mois-
ture and from water and other uids getting
inside directly.
●
For safety reasons, never perform other
works on the vehicle while charging.
●
Always complete the charging process be-
fore unplugging the connector from the
electrical network. Otherwise the charging
cable and the electrical installation may also
be damaged.
82
High-voltage battery
WARNING
If the vehicle is driven with a very low charge
level of the high-voltage battery, the vehicle
may stall in traic, causing serious damage or
accidents and injuries.
NOTICE
Fast charging with direct current (DC) uses
very high power. Frequent use of fast charg-
ing can permanently reduce the charging ca-
pacity of the high-voltage battery.
●
The battery should preferably be charged
with alternating current (AC) from a public or
domestic charging station.
Note
●
To charge the high-voltage battery us-
ing alternating current (AC), CUPRA recom-
mends using a home or other type of charg-
ing station and charging with maximum
charging power. These charging options are
more eicient than using a domestic power
socket.
●
Please note the technical data on your ve-
hicle's charging power. You can get more in-
formation from a specialised CUPRA dealer
or any SEAT network dealer.
●
The high-voltage battery can only be
charged at charging stations that meet the
requirements of the country in questions and
at least one of the following standards:
–
IEC 61851 and IEC 62196 (Europe)
–
ISO 15118 (-1, -2, -3)
–
SAE J1772 ( USA, Mexico)
●
In the event of very low or very high tem-
peratures, it may only be possible to charge
the high-voltage battery in a limited manner.
Identication of compatible charg-
ing infrastructure
Valid for: hybrid vehicles
Fig.55 Identication of alternating current
(AC) and type 2 connector.
Fig.56 Identication of direct current
(DC) and the vehicle's CCS connector
Compatibility between vehicles and charg-
ing infrastructure
The following indicators according to the
EN 17186 standard provide information about
whether the infrastructure's charging connec-
tors are suitable for the vehicle ›››
.
High-voltage battery
83
Charging the high-voltage battery
1
2
Indicators ›››
Fig.55
In the vehicle
At the charging station
Indicators ›››Fig.56
Voltage up to 500 volts
Voltage of up to 1000 volts.
The indicators are located on the vehicle's
charging socket, on components of the lo-
cal charging infrastructure (charging station,
socket) and on the charging cable. The indi-
cators refer to charging connection standards
according to IEC 62196.
WARNING
Charging the vehicle at unveried electrical
installations can cause serious injury and
damage.
●
If there is no indicator or if the charging in-
frastructure is unknown, an electrical instal-
lation expert should be consulted rst.
Charging with alternating current
(AC)
Valid for: hybrid vehicles
Fig.57 Opening the charging socket cover.
Fig.58 Behind the battery charging cover
on the front left-hand side: Charging socket
Fig.59 Behind the battery charging cover
on the front left-hand side: Charging socket
(depending on the market).
›››
Fig.58, ›››Fig.59
Charging process display
Charging socket
The battery charger installed in the vehicle
converts alternating current from the public
supply into direct current.
AC charging station or socket cable: The vehi-
cle’s high-voltage battery can be charged us-
ing alternating current (AC) through the corre-
sponding charging socket
2
.
Connecting the charging cable
●
Firstly, connect the charging cable to the
socket, or public or home charging station.
Next, fully unwind it.
●
Charging cable for domestic power sockets:
The protection device performs a self-test
›››page96.
84
High-voltage battery
●
If the vehicle is unlocked, the battery charg-
ing cover opens when the indicated zone is
pressed ›››Fig.57.
●
Plug the charging connector into the charg-
ing socket. Check that the charging connector
is fully plugged in.
The connector locks automatically.
The LED (charging process indicator) of the
charging socket
1
ashes or ashes white
›››
Fig.58 , ›››page86.
You can set the charging as required in the
infotainment system ›››page91.
Automatic start of the charging process
If scheduled charging is not activated,
the charging process starts immediately
›››page89. The external charging infra-
structure must be active.
Most public charging stations require authen-
tication to start the process. It is important
to verify that the authentication has been per-
formed correctly, otherwise it could cause a
system malfunction.
During charging
The charging process indicator on the charg-
ing socket
1
ashes green. The charging con-
nector is locked.
If the charging process indicator lights up red,
there is a fault ›››
page86.
Interrupting the charging process
The charging process can be interrupted:
●
Unlock the vehicle.
●
Press the Stop charging function button of
the infotainment system. The charging proc-
ess indicator located next to the charging
socket
1
lights up white. If you want the
charging connector to unlock automatically,
the Release connector automatically setting
must be selected in the charging settings
›››
page89.
●
Press the Continue button to restart the
process. The charging connector locks. In
some cases you may need to authenticate
yourself again in the charging station.
To restart the charging process just press the
function button.
After charging
When the high-voltage battery is fully charged,
the charging process display on the charging
socket lights up green.
●
Unlock the vehicle.
●
Unplug the charging connector from the
charging socket within 30 seconds.
●
OR: if Release connector automatically
is activated in the charging settings
›››
page89, the charging connector auto-
matically unlocks once the charging process is
complete.
●
Disconnect the charging cable from the
power supply and replace the protective cap.
●
Close the charging cover and make sure you
hear it click into place.
Charging with direct current (DC)
Valid for: hybrid vehicles
Fig.60 Opening the charging socket cover.
High-voltage battery
85
Charging the high-voltage battery
Fig.61 Behind the battery charging cover
on the rear right-hand side.
1
Charging process display
2
Charging socket
3
Protective cap
The alternating current is converted into direct
current outside the vehicle. A considerably
higher charging power is achieved than when
charging with alternating current (AC).
Public fast-charging station: The high-voltage
battery can be charged with direct current
(DC) at an appropriate charging station. The
charging time decreases signicantly.
Use a charging cable less than 30 metres long.
Connecting the charging cable
●
Unlock the vehicle.
●
Press the battery's charging socket cover in
the area of the arrow to open it ›››Fig.60.
●
Remove the protective cap and hang it on
the hook ›››Fig.61
3
●
Plug the charging station’s charging connec-
tor into the charging socket ›››Fig.61
2
The connector locks automatically.
The LED (charging process indicator) of
the charging socket ashes or ashes white
›››
Fig.61
1
›››
page86
Automatic start of charging
Switch on the charging station ››› .
The charging process will start immediately.
Most public charging stations require authen-
tication to start the process. It is important
to verify that the authentication has been per-
formed correctly, otherwise it could cause a
system malfunction.
During charging
The charging process indicator on the charg-
ing socket
1
ashes green ›››
Fig.61.
If the charging process indicator lights up red,
there is a fault ›››page86.
Interrupting the charging process
The charging process can be stopped before
the desired state of charge is reached:
●
Tap the Stop charging function button on
the infotainment system display. The charging
process indicator located next to the charg-
ing socket
1
lights up white ›››
Fig.61. The
charging connector is unlocked.
After charging
When the desired state of charge has been
reached, the charging process indicator on the
charging socket will light up green.
After charging, the charging connector is auto-
matically unlocked from the charging station
if the Release automatic connector option is
activated in the charging settings.
●
Unplug the charging connector from the
charging socket.
●
Place the protective cap on the charging
socket’s lower connection ›››Fig.61
3
●
Close the cover of the battery charging
socket until you hear it has engaged.
NOTICE
To use the charging station, bear in mind
the manufacturer’s indications and usage in-
structions.
86
High-voltage battery
Charging process display
Valid for: hybrid vehicles
Fig.62 Behind the battery charging socket
cover: charging process indicator.
Fig.63 On the inside face of the cover
of the battery charging socket: sticker
with information on the charging process
display.
An LED light on the charging socket ›››
Fig.62
(arrow) shows the status of the charging proc-
ess.
A sticker on the battery charging cover pro-
vides information on the meaning of the LEDs
›››Fig.63.
Charging process displays:
The LED ashes
●
The vehicle has detected the charging con-
nector.
White LED
●
1
Flashing: establishment of communica-
tion between the vehicle and the charging
infrastructure. The charging process is being
prepared.
●
Permanently on: no active charging function
Green LED
●
2
Flashing: the high-voltage battery is
charging.
●
3
Continuously on: delayed charging is ac-
tivated. The charging process has not yet star-
ted.
●
4
Permanently on: the charging process has
completed without any problems.
●
Flashes red: emergency charging at reduced
power due to a failure to recognize the charg-
ing connector.
Red LED
●
Permanently on: there is a fault in the system.
The charging process cannot start or has been
interrupted.
Get specialist assistance if the charging proc-
ess indicator permanently indicates a defect.
Charging socket lighting
In the dark, the charging socket's side lighting
(white LED) can facilitate orientation on the ve-
hicle:
High-voltage battery
87
Charging the high-voltage battery
On
●
The vehicle has been unlocked.
●
OR: The charging connector has been un-
plugged from the charging socket.
O
●
After unlocking or locking the vehicle, the
lighting switches o automatically after a while.
Charging process indicator lamp
During charging process, the lamp is dis-
played on the instrument cluster display.
White indicator: connector plugged in, no
charging process active.
Green indicator: connector plugged in,
charging process active.
Troubleshooting
Valid for: hybrid vehicles
The electrical system is not working
properly. Stop safely!
The warning lamp lights up red. A message is
displayed in this regard.
There is a fault in the high voltage system. The
high voltage components may be damaged
›››
.
It is not possible to charge the high-voltage
battery.
●
The vehicle must be parked in a safe
place. Park the vehicle outdoors as soon as it is
possible and safe to do so.
●
Switch o the drive system.
●
Seek professional assistance.
and HV battery: Risk of re! Stop
safely and get out immediately. Call the
emergency services.
The warning lamp lights up red and is dis-
played along with with a text message on the
instrument cluster accompanied by a continu-
ous audible warning.
The high voltage battery temperature is too
high .
If this message is displayed on the instrument
cluster, please note ››› and follow the steps
below:
●
Stop driving! Stop the vehicle immedi-
ately, taking into account the traic situation.
●
Choose a safe place outdoors, away from
buildings or vehicles, canopies, covered car
parks or similar places.
●
If possible, switch on the hazard warning
lights.
●
Before leaving the vehicle, make sure it is im-
mobilised (parking brake, parking lock P).
●
Switch o the ignition and leave the ignition
key on the dash panel or in a visible place so
that the emergency services can use it (for ex-
ample to recover the vehicle from a hazardous
area).
●
Exit the vehicle and make sure that there are
no other people or animals left inside.
●
Make sure that you leave the danger zone
together with all other vehicle occupants and
that everyone remains in an area that is protec-
ted from traic (e.g. behind the guard rail).
●
Notify the emergency services. Do not try to
put out the re yourself.
If the message is hidden, the warning lamp re-
mains visible .
The audible warning can only be turned o
by a qualied workshop. CUPRA recommends
that you visit an oicial dealer.
WARNING
If there is a risk of re in the high-voltage
battery, toxic gases may escape or compo-
nents may be released from the high voltage
battery. There is a risk of serious injury, burns
or lethal electric shocks.
●
Park the vehicle safely as soon as possible
›››page73, Behaviour in the event of an
accident or re
.
●
Get out of the vehicle and keep a safe dis-
tance away from it.
●
Call the re department immediately.
88
High-voltage battery
Deep discharge of the high-voltage bat-
tery due to prolonged parking time
The control lamp lights up red. A message is
displayed.
The high-voltage battery can be damaged if,
for example, the vehicle is not used for a long
time.
●
Charge the high-voltage battery immedi-
ately.
High voltage battery discharged
The control lamp lights up in yellow. A message
is displayed.
●
Charge the high-voltage battery immedi-
ately.
Low state of charge in the high-voltage
battery
The control lamp lights up in yellow. A message
is displayed showing the remaining range.
The high-voltage battery charge has reached
the reserve level.
●
Charge the high-voltage battery.
Range calculation fault
The control lamp lights up in yellow. A message
is displayed.
There is a fault in the range calculation. Con-
tact a specialised workshop.
The charging process is not possible or has
been paused
The charging process indicator located next to
the charging socket lights up red.
Before visiting a specialist workshop, you can
try the following solutions:
●
Plug the charging cable back in.
●
Check that the charging connector is plug-
ged in correctly.
●
Check if a fault is displayed on the charging
station or, depending on the equipment, on
the charging cable protection device.
If the fault cannot be rectied, contact a spe-
cialist workshop immediately.
The charging cable protection device dis-
connects
If electrical devices with a separate electrical
connection, e.g. a cool box, are used in the
vehicle at the same time, the self-test of the
protective device may detect a fault.
●
Please note the order! First connect the
charging cable to the external power supply
and then to the charging socket.
The charging time varies
During the direct current (DC) charging proc-
ess, the charging current is reduced automat-
ically to preventing the high-voltage battery
from overheating.
After several fast charging processes in a row,
the charging time is temporarily extended.
WARNING
High-voltage components, including the bat-
tery and high-voltage cables, may be live and
damaged. The high voltage system voltage is
dangerous and can cause burns, other inju-
ries and fatal electric shocks.
●
Do not touch the high voltage compo-
nents!
Emergency release of the charging
connector
Valid for: hybrid vehicles
Fig.64 Between the left wing panel and the
engine bonnet hinge: Charging connector
manual emergency release cover.
High-voltage battery
89
Charging settings
Unlocking the charging connector
Prerequisites:
●
The charging connector is plugged in cor-
rectly.
●
The vehicle is unlocked.
●
The charging process has ended or has
paused ›››page81.
●
When charging with alternating current
(AC), the setting Release connector auto-
matically is activated in the infotainment sys-
tem. ›››page89.
The manual release mechanism must be used
if these prerequisites are met and it is still
impossible to unplug the charging connector
›››
Emergency electrical release of the charging
connector
To avoid having to perform a manual emer-
gency release, try releasing the charging con-
nector electronically using the vehicle’s central
locking.
●
Unlock the vehicle three times in a row.
●
Unplug the charging connector.
Manual release of the charging connector
The puller for the manual release mechanism
is on the left hand side of the engine compart-
ment, above the charging socket ›››
Fig.64.
●
Disconnect the power supply at the charging
station or electrical socket.
●
Raise the bonnet.
●
Pull the tabs on the cover and slide the cover
upwards ›››Fig.64
1
to reveal the handle.
●
Pull the puller.
●
Immediately unplug the charging connector.
●
Replace the handle cover before closing the
bonnet.
WARNING
If the charging connector unexpectedly re-
mains locked, the fault may be caused by the
vehicle or charging station.
The manual emergency release can make live
contacts accessible. In this case, touching
the contacts of the charging socket may re-
sult in burns, other injuries or a fatal electric
shock.
●
Never touch the contacts of the charging
socket or the charging connector.
Note
The manual release mechanism of the charg-
ing connector should only be used in the
event of a failure.
Charging settings
Introduction
Immediate charging
The high-voltage battery can be charged with-
out further conguration and according to
the available charging option ›››
page83 ,
›››page84.
1. Plug in the charging cable A charging infor-
mation screen opens in the infotainment
system. The charging process starts auto-
matically.
2. Set the maximum battery charge level for
the desired range in the Infotainment sys-
tem.
Advanced charging conguration
Individual AC charging settings for your desired
location, e.g. at your home, oice or charg-
ing station, are available if a charging location
(from now on Schedule) has been created in
the Infotainment system.
1. Select: > Charging.
2. Store the current charging location in the
Schedule menu ›››page93.
If you want to performed programmed
charging, establish and activate a depar-
ture time ›››
page93.
3. Make further adjustments if desired.
90
High-voltage battery
Note
If no start time has been activated, the high-
voltage battery charges to the maximum
charge level.
Changing the charging mode
The available charging modes can be selected
via a drop-down list in the Charging menu or in
the departure menu ›››page42.
The available charging modes depend on the
Schedule conguration and the technical re-
quirements at the location.
High-voltage battery
91
Charging settings
1
2
3
4
5
6
7
8
9
10
11
Overview
Fig.65 In the infotainment system: Charging
main menu.
Indications in the Charging main menu
Some of the following indications are only
available when a charging schedule is active
›››
page93.
Charge scheduling ›››page93.
General charging settings ›››page92.
Current state of charge of the high-voltage
battery.
Current electric range.
Charging speed and power: the increase in
range per hour or per minute when charg-
ing at the current charging power is dis-
played. The charging power depends on
the charging infrastructure and the tem-
perature of the high-voltage battery. The
charging power can vary during the proc-
ess.
Minimum charging level. Only visible with
an active charging mode, based on a
schedule (not visible in immediate charg-
ing mode). Allows the minimum charging
level to be changed. If a destination is set,
it suggests the minimum charging level to
reach the destination ›››page92.
Charging mode selector based on the
schedule for the vehicle's current position.
Displayed only if a schedule has been pre-
viously set up. Provides extra information
about the schedule ›››
page93.
Touch pad for adjusting the maximum
charging level of the battery ›››
page92.
Navigation symbol with planned charging
stops: the maximum charging level is auto-
matically adjusted for the next suggested
stop.
Maximum set battery charging level
›››page92.
End the charge or restart it. Visible during
an active charging process.
Instructions for plugging in the charging
connector
Information on the current charging process is
displayed in the infotainment system.
92
High-voltage battery
Close the screen:
●
Press the function button.
●
EITHER: the display ends automatically after
2 minutes.
●
OR: lock the vehicle.
Conguration in the Settings menu
Open the General charging settings menu
1. Open the main Charging menu.
2. Push the
2
›››
Fig.65 button.
Settings in unknown locations
●
Reduce the AC charging power: the charg-
ing current is reduced to 6 or 8 amps depend-
ing on the country. With this setting you can
reduce mains overload when charging at a
socket.
●
Release the AC power cable: After the charg-
ing process is complete, the connector relea-
ses automatically.
Battery Care Mode function
The function automatically limits the maxi-
mum charge level to 80% for subsequent
charges. If it is necessary to charge to over
80% and this is congured, the next charge
will automatically be limited to 80%.
Note
●
The programmed charge conguration
prevails over the “Battery Care” congura-
tion (the maximum charge level is not auto-
matically reset).
●
CUPRA recommends using the Battery
Care Mode function in daily use to prolong
the life of the high-voltage battery.
Set the battery charging limits
The infotainment system can be used to adjust
the maximum and minimum charge level and
thus the vehicle’s range to suit daily needs.
Maximum battery charging level
Normally, if you use the vehicle regularly, it is
not necessary to fully charge the high-voltage
battery. The maximum charging level limits the
battery's maximum state of charge.
●
Move the touch slider to the desired value
in the infotainment system's charging settings
›››
page91.
The maximum charging level can also be adap-
ted during charging.
Minimum charging level of the battery
The minimum charging level sets the minimum
state of charge for a saved schedule. This func-
tion can be used to guarantee a minimum
range.
●
In the infotainment system select: >
Charging.
●
Set the minimum charging level in the sched-
ule.
After connecting the electricity, rst of all the
vehicle charges up to the battery's minimum
charging level. The preferred times or a de-
parture time, for programmed charging, will
only be taken into account once this limit is
reached.
Examples for charging with alternating cur-
rent (AC)
For AC charging, CUPRA recommends the fol-
lowing settings:
Everyday use - Long range is not necessary
●
Maximum battery charging level: 80% maxi-
mum.
●
Minimum battery charging level: 20% as a
minimum if the outside temperature is mild or
warm, or 40% if it is cool or cold.
Long distance travel - Long range required
●
Maximum battery charging level: 100%.
●
Minimum battery charging level: 20% as a
minimum if the outside temperature is mild or
warm, or 40% if it is cool or cold.
●
Avoid leaving the vehicle parked and start
driving immediately after charging the battery.
High-voltage battery
93
Charging settings
Set charging locations (Schedule)
You can create schedules associated with
charging locations in the infotainment system.
The vehicle recognises a saved charging loca-
tion when it is there, and uses the available
settings when charging.
Location data
The infotainment system uses the current lo-
cation data (geographical coordinates) of the
vehicle when you create or use a schedule.
Create a schedule
●
In the infotainment system select: >
Charging.
●
Press Schedule.
●
Add the charging location and give it a name
(maximum of 5).
Delete a schedule
●
In the infotainment system select: >
Charging.
●
Press Schedule.
●
Press the function button.
●
Press the function button to delete the
saved schedule.
Settings
●
For immediate charging in the current
schedule, activate the corresponding function
in the departure menu ›››page42 or in the
charging modes selector located in the Charg-
ing menu.
●
Departure time ›››page93
●
Reduce charging power in alternating cur-
rent: the charging current is reduced to 6 or
8 amps. With this setting you can reduce mains
overload when charging at a socket.
●
Release the AC power cable: After the charg-
ing process is complete, the connector relea-
ses automatically.
●
Minimum battery charging level from 0-50%
›››page92.
●
Maximum battery charging level from
50-100% ›››page92.
●
Preferred times. Activating this charging
mode can be helpful when there are other
electrical consumers in the household or when
you prefer to charge during cheaper time peri-
ods.
●
Display address or geographical coordinates
Note
All charging settings stored in the sched-
ule always apply to the currently recognised
charging location.
Departure time settings
When a charging location has been created,
the high-voltage battery can be charged for a
certain time.
Set the departure time
●
In the infotainment system select: >
Charging.
●
Press Schedule.
●
Open the prole of a charging location.
●
Set a departure time (maximum of three per
location).
–
Days of the week.
–
Time at which the high-voltage battery
should be charged.
–
Use once or weekly.
Air conditioning
The vehicle interior is cooled or heated for the
departure time by the stationary air condition-
ing. The operation depends on the equipment.
●
Set the desired temperature in the Station-
ary air conditioning ›››page158 menu.
●
Select the Charge and air conditioning
prior to departure function from the drop-
down list of charging modes.
94
High-voltage battery
Activate a departure time
●
Press Schedule.
●
Open the prole of a charging location.
●
Activate the departure time by checking the
checkbox .
●
Select the desired programmed charging
mode on the charging mode selector.
Displays
The departure time is used weekly.
Note
The departure menu remembers the active
charging mode and gives the option to mod-
ify it ›››page42.
Charging cable
Introduction
Valid for: hybrid vehicles
The type of charging cable supplied with the
vehicle basically depends on the technical
specications of each country, e.g. charging
connector connections for sockets.
CUPRA recommends exclusively using the
supplied charging cable.
Notes on the charging cable
●
Handle with care.
●
Unroll and roll fully.
●
Do not twist or bend it over sharp edges.
●
Do not crush it or drive the vehicle over it.
●
Always unplug it by pulling on the connector.
●
Children should not use the charging cable.
●
Keep animals away from the charging cable.
●
After use, store it safely and without twisting
it.
Notes on charging connectors and the
charging cable protection device
●
Do not touch the charging connector’s con-
tacts.
●
Protect from strong sunlight (outside tem-
peratures no higher than 50°C or 122°F).
●
Do not drop them.
●
Protect from immersion in uids such as rain
water.
●
Fit the protective caps after each use.
Cleaning the charging cable
Clean the surface of the charging cable with a
dry or slightly damp cloth ›››
, ››› .
WARNING
An unsecured or improperly secured charg-
ing cable may be thrown out of the vehicle’s
interior in the event of sudden driving or
braking manoeuvres. This may cause serious
accidents and injuries.
●
Store the charging cable in the supplied
charging cable bag and use the carabiner
to attach the bag to the fastening rings
at the front of the luggage compartment
›››page318.
WARNING
Using a charging cable that has been dam-
aged or tampered with can cause serious in-
jury and fatal electric shocks.
●
Before each use check that the connectors
and the charging cable are undamaged, e.g.
check for cracks.
●
Never disassemble the charging cable or its
components.
●
Never use a charging cable that is damaged
or has been tampered with.
●
If the charging cable does not work prop-
erly, get a specialised CUPRA dealer or any
SEAT dealership to look at it.
High-voltage battery
95
Charging cable
WARNING
The charging cable for electrical sockets
must always be connected directly to an
electrical socket. Failure to do so could result
in re damage and damage to the charging
cable or home electrical installation.
●
Never connect the charging cable to an
extension lead, cable reel, power strip or
adapter or timer.
WARNING
The high voltage system voltage is dangerous
and can cause burns, other injuries and fatal
electric shocks.
●
Only clean the charging cable when it is
unplugged.
NOTICE
Seek information regarding the appropriate
charging cable and the maximum permitted
charging current before travelling abroad. If
possible, use the charging cable supplied in
the country in question.
NOTICE
The charging cable, as portable electrical
equipment, may have to be checked periodi-
cally. This requires a test adapter.
NOTICE
The charging cable can be damaged if not
cleaned properly.
●
Only water should be used for this pur-
pose, and never additional cleaning prod-
ucts.
●
Water should be prevented from getting
into the contacts.
For the sake of the environment
Charging cables must be disposed of in an
environmentally friendly way and should not
be thrown in the household waste.
Note
The maximum charging capacity of the
safety circuit that is used must be observed.
If the charging cable is plugged into an elec-
trical socket on the same circuit as other
consumers, the circuit's fuses may trip.
Charging cable for alternating cur-
rent (AC) charging stations
Valid for: hybrid vehicles
Fig.66 Charging cable for alternating
current (AC) charging stations.
The maximum charging current is 16 or 32
amps, depending on the vehicle’s features and
the charging cable that is supplied ›››
.
WARNING
Charging the high-voltage battery with an in-
appropriate charging cable could cause short
circuits, serious injuries and fatal electrical
shocks.
WARNING
The charging cable should not be used as an
extension lead. The charging process could
be aected.
NOTICE
Follow the manufacturer’s instructions and
indications when using the charging station.
96
High-voltage battery
1
2
3
4
Note
Charging with a charging cable for 16A is
not possible at some charging stations that
support 32A. This depends on the charging
station’s equipment.
●
Before charging the vehicle, nd out about
the available charging technology.
Charging cable for power sockets
Valid for: hybrid vehicles
Fig.67 Charging cable for electrical
sockets
Fig.68 On the charging cable for power
sockets: Control lamps on the protection
device.
›››
Fig.68:
Indicator lamp of the connector and the
power supply.
Control lamp of the protection device
Control lamp of the vehicle
Failure warning lamp
Charging cable information
Before using the charging cable, also follow the
instructions displayed on it and on the rear of
the protective device.
Protection device
The electronic protection device ›››
Fig.68
ensures that the charging connector does not
receive current until it is plugged in to the vehi-
cle's charging connector.
Self-check
When the charging cable is plugged into the
electrical socket, the protective device au-
tomatically performs a self-test. During this
check, all warning and control lamps turn on
briey and go out one after the other. Upon
completion, the operational status at that time
is displayed.
Operating displays
One or more control lamps ›››
Fig.68
1
,
2
o
3
light up green.
Display ›››Fig.68
Meaning
1
ignition The charging cable is
plugged into the mains
1
,
2
on,
3
ashes slowly
›››
page96
The high-voltage bat-
tery is charging.
1
2
and
3
on The charging process
is complete. The high-
voltage battery has
charged.
Set the charging current
The charging cable limits the charging current
according to the available power supply.
High-voltage battery
97
Charging cable
If the local mains supply does not allow charg-
ing at the maximum charging current, the
charging current can be reduced, depending
on the charging setting features in the infotain-
ment system ›››page92.
Temperature control
The charging cable temperature control
switches on when the charging cable over-
heats, such as when it has been stored in a lug-
gage compartment exposed to high tempera-
tures or strong sunlight.
Display ›››Fig.68
Meaning
1
,
4
ashing The housing connector
has overheated.
2
,
4
ashing The protection device
has overheated.
If the charging process continues with a lower
current, both the operating indicator and the
warning lamp ›››
Fig.68
4
ash red.
●
Unplug the charging cable from the mains
and wait for it to cool down.
●
If it disconnects again, or the charging cur-
rent reduces and the cause does not seem to
be exposure to an external heat source, make
sure that the green control lamp is ashing
›››
Fig.68. Visit a specialised CUPRA dealer or
any SEAT network dealer to check the charg-
ing cable. Get an establishment that special-
ises in electrical installations to check the in-
frastructure connection.
Fault display
If the red warning light
4
ashes or turns on
without one of the control lamps ›››
Fig.68
1
,
2
o
3
also turning on continuously on the
status indicator, there is a fault.
Display ›››Fig.68
Meaning
1
ashing,
4
on
or ashing
Failure in the power
supply.
2
ashing,
4
on
or ashing
Failure in the protection
device.
3
ashing,
4
on
or ashing
Failure in the vehicle.
The charging process pauses or is cancelled.
●
Check the instructions located on the back
of the protective devices.
●
Seek professional assistance if the fault per-
sists.
Note
If there is any other mains connection during
charging, or if the vehicle is right next to the
high voltage cables, charging from an electri-
cal socket is not possible in some cases. Ad-
ditional mains connections:
●
Connecting a 12 volt battery charger.
●
Contact with a work tool connected to the
mains, such as a vehicle lift.

Related Topics

Popular Owner Manuals