2024-2026 Cupra Terramar SUV High-voltage battery -> Charging cable User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

High-voltage battery -> Charging cable for Your Cupra Terramar SUV First Generation (2024-2026)

92
High-voltage battery
Close the screen:
●
Press the function button.
●
EITHER: the display ends automatically after
2 minutes.
●
OR: lock the vehicle.
Conguration in the Settings menu
Open the General charging settings menu
1. Open the main Charging menu.
2. Push the
2
›››
Fig.65 button.
Settings in unknown locations
●
Reduce the AC charging power: the charg-
ing current is reduced to 6 or 8 amps depend-
ing on the country. With this setting you can
reduce mains overload when charging at a
socket.
●
Release the AC power cable: After the charg-
ing process is complete, the connector relea-
ses automatically.
Battery Care Mode function
The function automatically limits the maxi-
mum charge level to 80% for subsequent
charges. If it is necessary to charge to over
80% and this is congured, the next charge
will automatically be limited to 80%.
Note
●
The programmed charge conguration
prevails over the “Battery Care” congura-
tion (the maximum charge level is not auto-
matically reset).
●
CUPRA recommends using the Battery
Care Mode function in daily use to prolong
the life of the high-voltage battery.
Set the battery charging limits
The infotainment system can be used to adjust
the maximum and minimum charge level and
thus the vehicle’s range to suit daily needs.
Maximum battery charging level
Normally, if you use the vehicle regularly, it is
not necessary to fully charge the high-voltage
battery. The maximum charging level limits the
battery's maximum state of charge.
●
Move the touch slider to the desired value
in the infotainment system's charging settings
›››
page91.
The maximum charging level can also be adap-
ted during charging.
Minimum charging level of the battery
The minimum charging level sets the minimum
state of charge for a saved schedule. This func-
tion can be used to guarantee a minimum
range.
●
In the infotainment system select: >
Charging.
●
Set the minimum charging level in the sched-
ule.
After connecting the electricity, rst of all the
vehicle charges up to the battery's minimum
charging level. The preferred times or a de-
parture time, for programmed charging, will
only be taken into account once this limit is
reached.
Examples for charging with alternating cur-
rent (AC)
For AC charging, CUPRA recommends the fol-
lowing settings:
Everyday use - Long range is not necessary
●
Maximum battery charging level: 80% maxi-
mum.
●
Minimum battery charging level: 20% as a
minimum if the outside temperature is mild or
warm, or 40% if it is cool or cold.
Long distance travel - Long range required
●
Maximum battery charging level: 100%.
●
Minimum battery charging level: 20% as a
minimum if the outside temperature is mild or
warm, or 40% if it is cool or cold.
●
Avoid leaving the vehicle parked and start
driving immediately after charging the battery.
High-voltage battery
93
Charging settings
Set charging locations (Schedule)
You can create schedules associated with
charging locations in the infotainment system.
The vehicle recognises a saved charging loca-
tion when it is there, and uses the available
settings when charging.
Location data
The infotainment system uses the current lo-
cation data (geographical coordinates) of the
vehicle when you create or use a schedule.
Create a schedule
●
In the infotainment system select: >
Charging.
●
Press Schedule.
●
Add the charging location and give it a name
(maximum of 5).
Delete a schedule
●
In the infotainment system select: >
Charging.
●
Press Schedule.
●
Press the function button.
●
Press the function button to delete the
saved schedule.
Settings
●
For immediate charging in the current
schedule, activate the corresponding function
in the departure menu ›››page42 or in the
charging modes selector located in the Charg-
ing menu.
●
Departure time ›››page93
●
Reduce charging power in alternating cur-
rent: the charging current is reduced to 6 or
8 amps. With this setting you can reduce mains
overload when charging at a socket.
●
Release the AC power cable: After the charg-
ing process is complete, the connector relea-
ses automatically.
●
Minimum battery charging level from 0-50%
›››page92.
●
Maximum battery charging level from
50-100% ›››page92.
●
Preferred times. Activating this charging
mode can be helpful when there are other
electrical consumers in the household or when
you prefer to charge during cheaper time peri-
ods.
●
Display address or geographical coordinates
Note
All charging settings stored in the sched-
ule always apply to the currently recognised
charging location.
Departure time settings
When a charging location has been created,
the high-voltage battery can be charged for a
certain time.
Set the departure time
●
In the infotainment system select: >
Charging.
●
Press Schedule.
●
Open the prole of a charging location.
●
Set a departure time (maximum of three per
location).
–
Days of the week.
–
Time at which the high-voltage battery
should be charged.
–
Use once or weekly.
Air conditioning
The vehicle interior is cooled or heated for the
departure time by the stationary air condition-
ing. The operation depends on the equipment.
●
Set the desired temperature in the Station-
ary air conditioning ›››page158 menu.
●
Select the Charge and air conditioning
prior to departure function from the drop-
down list of charging modes.
94
High-voltage battery
Activate a departure time
●
Press Schedule.
●
Open the prole of a charging location.
●
Activate the departure time by checking the
checkbox .
●
Select the desired programmed charging
mode on the charging mode selector.
Displays
The departure time is used weekly.
Note
The departure menu remembers the active
charging mode and gives the option to mod-
ify it ›››page42.
Charging cable
Introduction
Valid for: hybrid vehicles
The type of charging cable supplied with the
vehicle basically depends on the technical
specications of each country, e.g. charging
connector connections for sockets.
CUPRA recommends exclusively using the
supplied charging cable.
Notes on the charging cable
●
Handle with care.
●
Unroll and roll fully.
●
Do not twist or bend it over sharp edges.
●
Do not crush it or drive the vehicle over it.
●
Always unplug it by pulling on the connector.
●
Children should not use the charging cable.
●
Keep animals away from the charging cable.
●
After use, store it safely and without twisting
it.
Notes on charging connectors and the
charging cable protection device
●
Do not touch the charging connector’s con-
tacts.
●
Protect from strong sunlight (outside tem-
peratures no higher than 50°C or 122°F).
●
Do not drop them.
●
Protect from immersion in uids such as rain
water.
●
Fit the protective caps after each use.
Cleaning the charging cable
Clean the surface of the charging cable with a
dry or slightly damp cloth ›››
, ››› .
WARNING
An unsecured or improperly secured charg-
ing cable may be thrown out of the vehicle’s
interior in the event of sudden driving or
braking manoeuvres. This may cause serious
accidents and injuries.
●
Store the charging cable in the supplied
charging cable bag and use the carabiner
to attach the bag to the fastening rings
at the front of the luggage compartment
›››page318.
WARNING
Using a charging cable that has been dam-
aged or tampered with can cause serious in-
jury and fatal electric shocks.
●
Before each use check that the connectors
and the charging cable are undamaged, e.g.
check for cracks.
●
Never disassemble the charging cable or its
components.
●
Never use a charging cable that is damaged
or has been tampered with.
●
If the charging cable does not work prop-
erly, get a specialised CUPRA dealer or any
SEAT dealership to look at it.
High-voltage battery
95
Charging cable
WARNING
The charging cable for electrical sockets
must always be connected directly to an
electrical socket. Failure to do so could result
in re damage and damage to the charging
cable or home electrical installation.
●
Never connect the charging cable to an
extension lead, cable reel, power strip or
adapter or timer.
WARNING
The high voltage system voltage is dangerous
and can cause burns, other injuries and fatal
electric shocks.
●
Only clean the charging cable when it is
unplugged.
NOTICE
Seek information regarding the appropriate
charging cable and the maximum permitted
charging current before travelling abroad. If
possible, use the charging cable supplied in
the country in question.
NOTICE
The charging cable, as portable electrical
equipment, may have to be checked periodi-
cally. This requires a test adapter.
NOTICE
The charging cable can be damaged if not
cleaned properly.
●
Only water should be used for this pur-
pose, and never additional cleaning prod-
ucts.
●
Water should be prevented from getting
into the contacts.
For the sake of the environment
Charging cables must be disposed of in an
environmentally friendly way and should not
be thrown in the household waste.
Note
The maximum charging capacity of the
safety circuit that is used must be observed.
If the charging cable is plugged into an elec-
trical socket on the same circuit as other
consumers, the circuit's fuses may trip.
Charging cable for alternating cur-
rent (AC) charging stations
Valid for: hybrid vehicles
Fig.66 Charging cable for alternating
current (AC) charging stations.
The maximum charging current is 16 or 32
amps, depending on the vehicle’s features and
the charging cable that is supplied ›››
.
WARNING
Charging the high-voltage battery with an in-
appropriate charging cable could cause short
circuits, serious injuries and fatal electrical
shocks.
WARNING
The charging cable should not be used as an
extension lead. The charging process could
be aected.
NOTICE
Follow the manufacturer’s instructions and
indications when using the charging station.
96
High-voltage battery
1
2
3
4
Note
Charging with a charging cable for 16A is
not possible at some charging stations that
support 32A. This depends on the charging
station’s equipment.
●
Before charging the vehicle, nd out about
the available charging technology.
Charging cable for power sockets
Valid for: hybrid vehicles
Fig.67 Charging cable for electrical
sockets
Fig.68 On the charging cable for power
sockets: Control lamps on the protection
device.
›››
Fig.68:
Indicator lamp of the connector and the
power supply.
Control lamp of the protection device
Control lamp of the vehicle
Failure warning lamp
Charging cable information
Before using the charging cable, also follow the
instructions displayed on it and on the rear of
the protective device.
Protection device
The electronic protection device ›››
Fig.68
ensures that the charging connector does not
receive current until it is plugged in to the vehi-
cle's charging connector.
Self-check
When the charging cable is plugged into the
electrical socket, the protective device au-
tomatically performs a self-test. During this
check, all warning and control lamps turn on
briey and go out one after the other. Upon
completion, the operational status at that time
is displayed.
Operating displays
One or more control lamps ›››
Fig.68
1
,
2
o
3
light up green.
Display ›››Fig.68
Meaning
1
ignition The charging cable is
plugged into the mains
1
,
2
on,
3
ashes slowly
›››
page96
The high-voltage bat-
tery is charging.
1
2
and
3
on The charging process
is complete. The high-
voltage battery has
charged.
Set the charging current
The charging cable limits the charging current
according to the available power supply.
High-voltage battery
97
Charging cable
If the local mains supply does not allow charg-
ing at the maximum charging current, the
charging current can be reduced, depending
on the charging setting features in the infotain-
ment system ›››page92.
Temperature control
The charging cable temperature control
switches on when the charging cable over-
heats, such as when it has been stored in a lug-
gage compartment exposed to high tempera-
tures or strong sunlight.
Display ›››Fig.68
Meaning
1
,
4
ashing The housing connector
has overheated.
2
,
4
ashing The protection device
has overheated.
If the charging process continues with a lower
current, both the operating indicator and the
warning lamp ›››
Fig.68
4
ash red.
●
Unplug the charging cable from the mains
and wait for it to cool down.
●
If it disconnects again, or the charging cur-
rent reduces and the cause does not seem to
be exposure to an external heat source, make
sure that the green control lamp is ashing
›››
Fig.68. Visit a specialised CUPRA dealer or
any SEAT network dealer to check the charg-
ing cable. Get an establishment that special-
ises in electrical installations to check the in-
frastructure connection.
Fault display
If the red warning light
4
ashes or turns on
without one of the control lamps ›››
Fig.68
1
,
2
o
3
also turning on continuously on the
status indicator, there is a fault.
Display ›››Fig.68
Meaning
1
ashing,
4
on
or ashing
Failure in the power
supply.
2
ashing,
4
on
or ashing
Failure in the protection
device.
3
ashing,
4
on
or ashing
Failure in the vehicle.
The charging process pauses or is cancelled.
●
Check the instructions located on the back
of the protective devices.
●
Seek professional assistance if the fault per-
sists.
Note
If there is any other mains connection during
charging, or if the vehicle is right next to the
high voltage cables, charging from an electri-
cal socket is not possible in some cases. Ad-
ditional mains connections:
●
Connecting a 12 volt battery charger.
●
Contact with a work tool connected to the
mains, such as a vehicle lift.

Related Topics

Popular Owner Manuals