2024-2026 Cupra Terramar SUV High-voltage battery -> Charging the high-voltage battery User Manual
MyCarUserManual.com
USER MANUALS FOR EVERY MAKE & MODEL

High-voltage battery -> Charging the high-voltage battery for Your Cupra Terramar SUV First Generation (2024-2026)

High-voltage battery
81
Charging the high-voltage battery
NOTICE
If the vehicle is parked for a long time with
the high-voltage battery discharged, it may
no longer be possible to charge the bat-
tery or start the vehicle. Irreversible damage
could be caused to the high voltage battery
in the long term.
●
Charge the high-voltage battery at regular
intervals.
Charging the high-voltage
battery
Introduction
Valid for: hybrid vehicles
Check that the drive system is deactivated and
that the charging cable and infrastructure are
in a perfect state of repair.
Types of charging
The following charging types are possible for
the vehicle:
●
Charging with alternating current (AC) at a
public or home charging station ›››
page83:
Charging at high power. The maximum achiev-
able charging power depends on the charging
station and charging cable that is used and the
performance of the vehicle's charger.
●
Charging with alternating current (AC) at a
household socket ›››page83:
The electrical installation of the house must
have been checked and be in perfect working
order ››› . Due to the large capacity of the
battery and the low power of this method, a full
charge will take more than 20 hours (8 hours,
depending on the market).
●
Charging with direct current (DC) at a fast
charging station ›››page84:
This is the most powerful type of charge. The
charging time decreases signicantly. Please
note the information on charging frequently
with direct current (DC) ››› .
Protection against current leakage
The vehicle is tted with a direct current (DC)
leakage protection device. This prevents any
current leakage that may occur during charg-
ing from reaching the house's electrically in-
stallation through the charging cable.
WARNING
If the battery is charged in an inappropri-
ate manner, if no consideration is given to
the appropriate safety measures or the high-
voltage battery is used in an inadequate
manner, this could lead to short circuits,
electrical shocks, explosions, res, burns and
serious injuries, and even death.
●
Always respect the stipulated order of the
operations to avoid the risk of suering an
electric shock or serious injuries due to the
residual energy in the charging accumulator.
●
Please observe the safety and handling
instructions of the charging cable supplied
with the vehicle ›››page94.
●
When charging, only use power sockets
that are appropriately tted, have been
checked and are not damaged, as well as
electrical installations that are in perfect
working order. Duly qualied technicians
should check the power sockets and the
electrical installation on a regular basis.
●
Never charge the vehicle in places where
there is a danger of explosion. The compo-
nents of the charging cable can cause sparks
and, therefore, may ignite ammable fumes
or explosives.
●
Always protect the connectors from mois-
ture and from water and other uids getting
inside directly.
●
For safety reasons, never perform other
works on the vehicle while charging.
●
Always complete the charging process be-
fore unplugging the connector from the
electrical network. Otherwise the charging
cable and the electrical installation may also
be damaged.
82
High-voltage battery
WARNING
If the vehicle is driven with a very low charge
level of the high-voltage battery, the vehicle
may stall in traic, causing serious damage or
accidents and injuries.
NOTICE
Fast charging with direct current (DC) uses
very high power. Frequent use of fast charg-
ing can permanently reduce the charging ca-
pacity of the high-voltage battery.
●
The battery should preferably be charged
with alternating current (AC) from a public or
domestic charging station.
Note
●
To charge the high-voltage battery us-
ing alternating current (AC), CUPRA recom-
mends using a home or other type of charg-
ing station and charging with maximum
charging power. These charging options are
more eicient than using a domestic power
socket.
●
Please note the technical data on your ve-
hicle's charging power. You can get more in-
formation from a specialised CUPRA dealer
or any SEAT network dealer.
●
The high-voltage battery can only be
charged at charging stations that meet the
requirements of the country in questions and
at least one of the following standards:
–
IEC 61851 and IEC 62196 (Europe)
–
ISO 15118 (-1, -2, -3)
–
SAE J1772 ( USA, Mexico)
●
In the event of very low or very high tem-
peratures, it may only be possible to charge
the high-voltage battery in a limited manner.
Identication of compatible charg-
ing infrastructure
Valid for: hybrid vehicles
Fig.55 Identication of alternating current
(AC) and type 2 connector.
Fig.56 Identication of direct current
(DC) and the vehicle's CCS connector
Compatibility between vehicles and charg-
ing infrastructure
The following indicators according to the
EN 17186 standard provide information about
whether the infrastructure's charging connec-
tors are suitable for the vehicle ›››
.
High-voltage battery
83
Charging the high-voltage battery
1
2
Indicators ›››
Fig.55
In the vehicle
At the charging station
Indicators ›››Fig.56
Voltage up to 500 volts
Voltage of up to 1000 volts.
The indicators are located on the vehicle's
charging socket, on components of the lo-
cal charging infrastructure (charging station,
socket) and on the charging cable. The indi-
cators refer to charging connection standards
according to IEC 62196.
WARNING
Charging the vehicle at unveried electrical
installations can cause serious injury and
damage.
●
If there is no indicator or if the charging in-
frastructure is unknown, an electrical instal-
lation expert should be consulted rst.
Charging with alternating current
(AC)
Valid for: hybrid vehicles
Fig.57 Opening the charging socket cover.
Fig.58 Behind the battery charging cover
on the front left-hand side: Charging socket
Fig.59 Behind the battery charging cover
on the front left-hand side: Charging socket
(depending on the market).
›››
Fig.58, ›››Fig.59
Charging process display
Charging socket
The battery charger installed in the vehicle
converts alternating current from the public
supply into direct current.
AC charging station or socket cable: The vehi-
cle’s high-voltage battery can be charged us-
ing alternating current (AC) through the corre-
sponding charging socket
2
.
Connecting the charging cable
●
Firstly, connect the charging cable to the
socket, or public or home charging station.
Next, fully unwind it.
●
Charging cable for domestic power sockets:
The protection device performs a self-test
›››page96.
84
High-voltage battery
●
If the vehicle is unlocked, the battery charg-
ing cover opens when the indicated zone is
pressed ›››Fig.57.
●
Plug the charging connector into the charg-
ing socket. Check that the charging connector
is fully plugged in.
The connector locks automatically.
The LED (charging process indicator) of the
charging socket
1
ashes or ashes white
›››
Fig.58 , ›››page86.
You can set the charging as required in the
infotainment system ›››page91.
Automatic start of the charging process
If scheduled charging is not activated,
the charging process starts immediately
›››page89. The external charging infra-
structure must be active.
Most public charging stations require authen-
tication to start the process. It is important
to verify that the authentication has been per-
formed correctly, otherwise it could cause a
system malfunction.
During charging
The charging process indicator on the charg-
ing socket
1
ashes green. The charging con-
nector is locked.
If the charging process indicator lights up red,
there is a fault ›››
page86.
Interrupting the charging process
The charging process can be interrupted:
●
Unlock the vehicle.
●
Press the Stop charging function button of
the infotainment system. The charging proc-
ess indicator located next to the charging
socket
1
lights up white. If you want the
charging connector to unlock automatically,
the Release connector automatically setting
must be selected in the charging settings
›››
page89.
●
Press the Continue button to restart the
process. The charging connector locks. In
some cases you may need to authenticate
yourself again in the charging station.
To restart the charging process just press the
function button.
After charging
When the high-voltage battery is fully charged,
the charging process display on the charging
socket lights up green.
●
Unlock the vehicle.
●
Unplug the charging connector from the
charging socket within 30 seconds.
●
OR: if Release connector automatically
is activated in the charging settings
›››
page89, the charging connector auto-
matically unlocks once the charging process is
complete.
●
Disconnect the charging cable from the
power supply and replace the protective cap.
●
Close the charging cover and make sure you
hear it click into place.
Charging with direct current (DC)
Valid for: hybrid vehicles
Fig.60 Opening the charging socket cover.
High-voltage battery
85
Charging the high-voltage battery
Fig.61 Behind the battery charging cover
on the rear right-hand side.
1
Charging process display
2
Charging socket
3
Protective cap
The alternating current is converted into direct
current outside the vehicle. A considerably
higher charging power is achieved than when
charging with alternating current (AC).
Public fast-charging station: The high-voltage
battery can be charged with direct current
(DC) at an appropriate charging station. The
charging time decreases signicantly.
Use a charging cable less than 30 metres long.
Connecting the charging cable
●
Unlock the vehicle.
●
Press the battery's charging socket cover in
the area of the arrow to open it ›››Fig.60.
●
Remove the protective cap and hang it on
the hook ›››Fig.61
3
●
Plug the charging station’s charging connec-
tor into the charging socket ›››Fig.61
2
The connector locks automatically.
The LED (charging process indicator) of
the charging socket ashes or ashes white
›››
Fig.61
1
›››
page86
Automatic start of charging
Switch on the charging station ››› .
The charging process will start immediately.
Most public charging stations require authen-
tication to start the process. It is important
to verify that the authentication has been per-
formed correctly, otherwise it could cause a
system malfunction.
During charging
The charging process indicator on the charg-
ing socket
1
ashes green ›››
Fig.61.
If the charging process indicator lights up red,
there is a fault ›››page86.
Interrupting the charging process
The charging process can be stopped before
the desired state of charge is reached:
●
Tap the Stop charging function button on
the infotainment system display. The charging
process indicator located next to the charg-
ing socket
1
lights up white ›››
Fig.61. The
charging connector is unlocked.
After charging
When the desired state of charge has been
reached, the charging process indicator on the
charging socket will light up green.
After charging, the charging connector is auto-
matically unlocked from the charging station
if the Release automatic connector option is
activated in the charging settings.
●
Unplug the charging connector from the
charging socket.
●
Place the protective cap on the charging
socket’s lower connection ›››Fig.61
3
●
Close the cover of the battery charging
socket until you hear it has engaged.
NOTICE
To use the charging station, bear in mind
the manufacturer’s indications and usage in-
structions.
86
High-voltage battery
Charging process display
Valid for: hybrid vehicles
Fig.62 Behind the battery charging socket
cover: charging process indicator.
Fig.63 On the inside face of the cover
of the battery charging socket: sticker
with information on the charging process
display.
An LED light on the charging socket ›››
Fig.62
(arrow) shows the status of the charging proc-
ess.
A sticker on the battery charging cover pro-
vides information on the meaning of the LEDs
›››Fig.63.
Charging process displays:
The LED ashes
●
The vehicle has detected the charging con-
nector.
White LED
●
1
Flashing: establishment of communica-
tion between the vehicle and the charging
infrastructure. The charging process is being
prepared.
●
Permanently on: no active charging function
Green LED
●
2
Flashing: the high-voltage battery is
charging.
●
3
Continuously on: delayed charging is ac-
tivated. The charging process has not yet star-
ted.
●
4
Permanently on: the charging process has
completed without any problems.
●
Flashes red: emergency charging at reduced
power due to a failure to recognize the charg-
ing connector.
Red LED
●
Permanently on: there is a fault in the system.
The charging process cannot start or has been
interrupted.
Get specialist assistance if the charging proc-
ess indicator permanently indicates a defect.
Charging socket lighting
In the dark, the charging socket's side lighting
(white LED) can facilitate orientation on the ve-
hicle:
High-voltage battery
87
Charging the high-voltage battery
On
●
The vehicle has been unlocked.
●
OR: The charging connector has been un-
plugged from the charging socket.
O
●
After unlocking or locking the vehicle, the
lighting switches o automatically after a while.
Charging process indicator lamp
During charging process, the lamp is dis-
played on the instrument cluster display.
White indicator: connector plugged in, no
charging process active.
Green indicator: connector plugged in,
charging process active.
Troubleshooting
Valid for: hybrid vehicles
The electrical system is not working
properly. Stop safely!
The warning lamp lights up red. A message is
displayed in this regard.
There is a fault in the high voltage system. The
high voltage components may be damaged
›››
.
It is not possible to charge the high-voltage
battery.
●
The vehicle must be parked in a safe
place. Park the vehicle outdoors as soon as it is
possible and safe to do so.
●
Switch o the drive system.
●
Seek professional assistance.
and HV battery: Risk of re! Stop
safely and get out immediately. Call the
emergency services.
The warning lamp lights up red and is dis-
played along with with a text message on the
instrument cluster accompanied by a continu-
ous audible warning.
The high voltage battery temperature is too
high .
If this message is displayed on the instrument
cluster, please note ››› and follow the steps
below:
●
Stop driving! Stop the vehicle immedi-
ately, taking into account the traic situation.
●
Choose a safe place outdoors, away from
buildings or vehicles, canopies, covered car
parks or similar places.
●
If possible, switch on the hazard warning
lights.
●
Before leaving the vehicle, make sure it is im-
mobilised (parking brake, parking lock P).
●
Switch o the ignition and leave the ignition
key on the dash panel or in a visible place so
that the emergency services can use it (for ex-
ample to recover the vehicle from a hazardous
area).
●
Exit the vehicle and make sure that there are
no other people or animals left inside.
●
Make sure that you leave the danger zone
together with all other vehicle occupants and
that everyone remains in an area that is protec-
ted from traic (e.g. behind the guard rail).
●
Notify the emergency services. Do not try to
put out the re yourself.
If the message is hidden, the warning lamp re-
mains visible .
The audible warning can only be turned o
by a qualied workshop. CUPRA recommends
that you visit an oicial dealer.
WARNING
If there is a risk of re in the high-voltage
battery, toxic gases may escape or compo-
nents may be released from the high voltage
battery. There is a risk of serious injury, burns
or lethal electric shocks.
●
Park the vehicle safely as soon as possible
›››page73, Behaviour in the event of an
accident or re
.
●
Get out of the vehicle and keep a safe dis-
tance away from it.
●
Call the re department immediately.
88
High-voltage battery
Deep discharge of the high-voltage bat-
tery due to prolonged parking time
The control lamp lights up red. A message is
displayed.
The high-voltage battery can be damaged if,
for example, the vehicle is not used for a long
time.
●
Charge the high-voltage battery immedi-
ately.
High voltage battery discharged
The control lamp lights up in yellow. A message
is displayed.
●
Charge the high-voltage battery immedi-
ately.
Low state of charge in the high-voltage
battery
The control lamp lights up in yellow. A message
is displayed showing the remaining range.
The high-voltage battery charge has reached
the reserve level.
●
Charge the high-voltage battery.
Range calculation fault
The control lamp lights up in yellow. A message
is displayed.
There is a fault in the range calculation. Con-
tact a specialised workshop.
The charging process is not possible or has
been paused
The charging process indicator located next to
the charging socket lights up red.
Before visiting a specialist workshop, you can
try the following solutions:
●
Plug the charging cable back in.
●
Check that the charging connector is plug-
ged in correctly.
●
Check if a fault is displayed on the charging
station or, depending on the equipment, on
the charging cable protection device.
If the fault cannot be rectied, contact a spe-
cialist workshop immediately.
The charging cable protection device dis-
connects
If electrical devices with a separate electrical
connection, e.g. a cool box, are used in the
vehicle at the same time, the self-test of the
protective device may detect a fault.
●
Please note the order! First connect the
charging cable to the external power supply
and then to the charging socket.
The charging time varies
During the direct current (DC) charging proc-
ess, the charging current is reduced automat-
ically to preventing the high-voltage battery
from overheating.
After several fast charging processes in a row,
the charging time is temporarily extended.
WARNING
High-voltage components, including the bat-
tery and high-voltage cables, may be live and
damaged. The high voltage system voltage is
dangerous and can cause burns, other inju-
ries and fatal electric shocks.
●
Do not touch the high voltage compo-
nents!
Emergency release of the charging
connector
Valid for: hybrid vehicles
Fig.64 Between the left wing panel and the
engine bonnet hinge: Charging connector
manual emergency release cover.

Related Topics

Popular Owner Manuals